- UpvoteDownvoteShare Job
- Suggest Revision
Special Requirements: Possession of a valid North Carolina driver's license; Possession of a law enforcement certification awarded by the North Carolina Criminal Justice Education and Training Standards Commission; Ability to obtain certification in Police Bike Patrol Techniques, Field Training Officer, K9 Handler, and Radar Operator (as the position may require); valid CPR certification.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Safely and properly operates warehouse equipment to complete tasks (e.g., forklifts, cherry-picking lifts, pallet jacks, or other warehouse machinery). May be required to wear various forms of protective equipment (shoes, gloves, protective eyewear, etc.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The Field Service Technician will be responsible for supporting Printed Circuit Board manufacturers with capital equipment maintenance, repairs, and installation. An electronics manufacturing and graphic printing equipment supplier client of Insight Global's is looking for a talented Field Service Engineer to sit on the east coast and travel to client sites, mostly domestically and on the east coast.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Our newer Active Pharmaceutical Ingredients (API) facility in Clayton, NC sits on 825,000 square-feet of state-of-the-art equipment, and houses the Fermentation, Recovery and Purification in the production of ingredients for Novo Nordisk’s innovative oral products.
Full-timeExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Qualifications High school graduate or equivalent required, Associate's degree in related field preferred BioWork graduate preferred Minimum of 2 years experience in a manufacturing industry, FDA regulated preferred required Qualified to perform operator activities on work cell equipment required Ability to read, write & understand complicated product documentation & standard operating procedures with attention to detail.
Full-timeExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Uses mobile equipment (Reach Truck, Forklift Stand up/Sit down, Tugger, etc.) As a Production Associate Supporting Logistics You Will Perform The Material Handling And Warehousing Functions Required In The Receiving Processing, Storing, Moving, Packing And Shipping Of Parts, Materials, Equipment And Supplies At The Clayton/Smithfield, NC Facility.
Part-timeExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Our diverse and expansive project scope of heavy civil infrastructure projects includes dams, reservoirs, locks, DOT roadway construction and bridges, large diameter utilities, landfills, mass excavation, wastewater, on-demand emergency services.
$100,000 a yearExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
As a Power Equipment Operator at Walmart Supply Chain, you will be operating power equipment to move product through the Distribution network to the Stores to service our Customers.
ExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Assist maintenance team with equipment & systems shutdown, start-up, LOTO & EHS permitting. Routinely operates & inspects manufacturing equipment using hands. Support the HVAC/Refrigeration systems throughout the facility based on guidance from the Control Room Technicians.
ExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Produce a 3D Model that would generate the following drawings: General Arrangement, Electrical Equipment Plans, Sections, Electrical Connection Details, Foundation Plans, Grounding Plans, Grounding Details, Conduit and Trench Plans, Conduit Details, Control Building Layout, Control Building Details, Bill of Material, Cable Schedules, and a Shielding Plan. Using Inventor, AutoCAD, P4A and SDS software.
ExpandApply NowActive JobUpdated 7 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The Diesel Maintenance Tech (B),is responsible for repairing and maintaining all medium to heavy duty customer vehicles and equipment (class 8 semis, forklifts, pallet jacks, etc.) The Lead is also responsible for repairing and maintaining all medium to heavy duty customer vehicles and equipment (class 8 semis, forklifts, pallet jacks, etc.
$28 an hourFull-timeExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The Automation Technician will safely maintain all assets within an automated warehouse facility, including conveyance systems and other electromechanical components; dock doors, levelers, and other facility equipment; while actively supporting the operation to ensure all equipment is running per the efficiency and effectiveness of its design.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The RCA will be competent and perform the following respiratory care procedures: oxygen supply systems, equipment processing, manual resuscitation, oxygen administration, humidity and aerosol therapy, small volume nebulizer therapy, MDI administration, incentive spirometry, non-invasive mechanical airway clearance therapy, chest physiotherapy with suctioning, arterial puncture, electrocardiogram (if performed by hiring institute), and patient reporting.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Since 1976, TekniPlex Healthcare, located in Clayton, NC, has been producing medical tubing for a wide range of medical device applications including IV therapy, respiratory, dialysis, anesthesia, diagnostic and surgical equipment.
Full-timeExpandApply NowActive JobUpdated 4 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Qualified in one watch station: Utility Plant Operator (UPO), Production Support Operator (PSO) or Critical Utility Operator (CUO) The Utilities Control Room Operator will be responsible for maintaining operation of all utility systems while coordinating the activities of shift technicians.
ExpandApply NowActive JobUpdated 5 days ago
roller heavy equipment operator jobs in Clayton, NC
FEATURED BLOG POSTS
6 Store Management Resume Tips (with Example)
A retail store manager's job responsibilities aren't easy. Regardless of the parent company's size, it is the store manager's duty to ensure ALL store-related operations run smoothly. Because being an effective leader in retail management can be tough, it is automatically assumed that getting a job is even tougher. But even though the job responsibilities can be tasking, landing a retail store manager position is a little easier... but only if you have the right tools. Most companies do not expect prospective store managers to have a sophisticated educational background. Instead, they select people with convincing skill-set and experience. So, how do you convince recruiters that you're the best candidate for the job? Start by writing a compelling retail store management resume!
How to Automate Your Job Search
The internet is ripe with career professionals urging you to be aggressive in your networking and application strategies to land a job. But at what expense? Your sanity? Peace of mind? Energy? Free time? When the job search gets overwhelming—as it inevitably will—leverage automation to take the most tedious tasks off your plate. Here are seven ways to do it.
How To Request Accommodations at Work (According to Someone Who’s Done It)
Doing a job for eight hours a day, five days a week is exhausting for anyone. But for those with a disability or chronic pain, it can be especially taxing—something must change. Asking for reasonable accommodations at work can feel tricky, especially if you’re new to the job. Under the Americans with Disabilities Act (ADA), physical disabilities, health conditions, and symptoms of mental health are all valid workplace accommodations. When you request accommodations, it means that your condition is impacting your ability to perform at work.
How to Write a Property Manager Resume
Property management experts have a variety of responsibilities, such as ensuring the safety and durability of commercial and residential buildings. During recruitment for such a position, recruiters assess your skills first-hand. This begins with how well you organize and tailor your property management resume. In other words, they can't afford to bring you onboard if your resume does not impress them.
Finally! Answers to 9 Job Search Questions You've Been Wondering About
There’s no college course on how to job search effectively. If schools offered “Job Searching: 101,” we wouldn’t have to write this article. Unfortunately, there’s nothing straightforward about a job hunt, and researching the best job searching methods is basically limited to sourcing peer advice and internet articles. Don’t worry; we’ve got your back. Here are definitive answers to the most common questions you’ve been dying to ask.
How to Successfully Make a Career Change in the New Year
The beginning of a new year is often a time for reflection and introspection. Millions of people use this time to come up with new resolutions to help them live happier and healthier lives. Pursuing our career ambitions is among the top five, right up there with exercising more and eating better.
Spotting the Details to Build a Construction Project Manager Resume
So you’re ready to become a Construction Project Manager! To achieve this goal, you need to find the right role and write the best resume you can to show a prospective employer that you’re a great fit.