- UpvoteDownvoteShare Job
- Suggest Revision
Set up and calibrate nondestructive testing equipment, Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Maintaining and coordinating MIPs (mandatory inspection points) as well as Quality Audits. Internal Job Title: Specialist, Quality Engineer. Knowledge of quality tools such as Lean principles, measurement systems analysis, design of experiments, statistical process control, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
$80,000 a yearExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Monitor staff work for quality and compliance with applicable laws, codes, regulations and ordinances; review staff inspection reports for consistency and accuracy; research and investigate problems or issues and resolve expediently and appropriately.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Additive Manufacturing Quality Engineer will act as the command center for all data and trends related to 3D printing development and production performance. Minimum 3 years of direct experience in quality engineering within the additive manufacturing or 3D printing sector.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Other Phase I, Phase II, Industrial, and Construction Permits experience is desirable or other relevant specialty, e.g., natural resources, Flood Control studies, hydrology models, water quality management plans, or other related water treatment control technologies, and be active in local or statewide trade agencies (e.g., CASQA, SAME, BIA, IEA, CWEA, or other local environmental organizations.
$120,000 - $150,000 a yearFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world’s largest industrial segments. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
One or more International Code Council (ICC (or equivalent) certification(s) from the general inspection category such as Building Inspector, Plumbing Inspector, Mechanical Inspector, Electrical Inspector or any combination thereof, including Residential Combination Inspector.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
In addition, we offer a $300 cash bonus , paid immediately upon completion of U-Haul Equipment Inspection and Verification through our 1-2-3 Punch Certification Program at retail stores. As a Customer Service Representative, you will work as part of a supportive team to be the face of U-Haul company's exceptional service and ensuring that customers get all the help they need on their journeys by inspecting and maintaining equipment.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Communicate with project manager, engineering technicians, client representative, contractor’s representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results.
$21.75 - $30.5 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
ASIs at the FG-13 level participate extensively in the certification inspection and surveillance of highly complex air carrier operations where principal program responsibility is vested in an aviation safety inspector of higher grade.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
We are looking for an experienced, focused QA/QC Inspector who will cover day-to-day quality tasks and assist with in-process inspections. Knowledge of CMM devices and laser scanners as well as other modern inspection equipment.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Initiate annual internal MI audit to verify inspection data quality. The inspection engineer will perform calculations (use of statistical methods) using corrosion data to determine inspection schedules, and equipment/piping remaining life.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Perform basic to intermediate inspection and repairs on surgical instrumentation using grinding wheels, buffing wheels, various hand and power tools, soldering, etc. Examples are small engine repair, cell phone and electronics repair, testing, or re-builds, carpentry, circuit board assembly and repair, sterile processing, industrial sewing, and jewelry repair.
$18.79 - $24.64 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
All work is performed to NFPA and Company standards with quality inspection and installation techniques practiced. Daily communications with Project Manager and/or Schedule Coordinator on inspection or project delays, requirements and general status of jobs.
$19 - $22 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Generate inspection plans: characteristic accountability-sequence (balloon) all drawing characteristics, extract specification requirements for inspection, generate inspection method required equipment, and review and approve IMS.
ExpandApply NowActive JobUpdated Today
quality inspection jobs Title: quality Company: Abbott Laboratories in Carson, CA
FEATURED BLOG POSTS
Internal Hiring Best Practices
Each companies hiring strategy is based on a set of rules that defines the ideal candidate. Many companies utilize internal and external hiring to ensure they have skilled, experienced workers. If you work in recruiting, maximizing your internal hiring strategies could be the key to retaining employees and simplifying your hiring process.
Why is it so Hard to Get a Job After College
For many, it was easy finding a job while in college. But after job hunting for weeks, you may wonder why it is so hard to get a job after college. After all, you’ve put a lot of time and effort into getting your degree. But don’t get discouraged. The University of Washington found that 53% of graduates are either unemployed or working a job that doesn’t require a degree. Other studies also show that landing your first job can take between 3 and 6 months. So, getting your first job takes time.
Why Leadership Is So Important in Your Career
There are plenty of baseball players worldwide, but only a select few will master the sport enough to play in the World Series. Similarly, you’ll meet hundreds of “managers” throughout your professional career. Still, only a few will cement themselves as true leaders in your mind. This is why leadership is important—the most influential leaders leave a mark. They inspire.
Making the Move to Salary Transparency
The salary transparency trend continues. Last year, Colorado passed its Equal Pay Transparency Rules, which required employers to include compensation in job postings, notify employees about promotional opportunities, and record job descriptions and wage records. Soon after, states like Washington, Nevada, Maryland, and Rhode Island followed suit.
Brand Reputation 101
People's initial perception of your organization is also known as your brand reputation. Your brand rep either encourages or discourages people from engaging with your company. This means the way people view your company will affect sales and even recruiting efforts.
Recruiting in a Tight Market
As a recruiter or employer, you know how much the economy affects your recruitment and retention efforts. You aren't just in competition with companies in your industry, but you are also fighting against inflation, recession, unemployment rates, and so much more.
How to Build a Candidate Persona
A candidate persona is a semi-fictional representation of your ideal candidate. Building a candidate persona is one of the best methods employers use to ensure their sourcing, recruiting, and hiring processes are focused. Knowing exactly what you're looking for streamlines everything and helps increase hiring confidence. So here's how to create a candidate persona and how to use it.