- UpvoteDownvoteShare Job
- Suggest Revision
Fabrication Technicians must provide basic hand/ air tools for their use along with the ability to use basic power tools including grinders, drills, drill presses, cut off saws, and other various tools of the trade.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Must be able to use a wide range of hand and power tools such as saws and nail guns, and basic hand tools such as a hammer, framing square, and tape measure, also must understand use and maintenance of all trade specific tools and equipment.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Layout and install ductwork and equipment hangers using duct straps, threaded rods, hanging wire, Unistrut, and angle using tools such as lasers, saws, hammer drills, and powder-actuated guns, when allowed and with certification.
$28 - $35 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Operate a variety of machinery, equipment and tools including saws, router, drills, sanders, planers, drill presses and various hand tools. Some specific responsibilities include:Under supervision, assist with maintenance of multiple mechanical areas including components within the HVAC system, plumbing installation/maintenance, generator operations, fire detection and suppression, life safety, temperature control systems, building management systems, and digital systems (including fire alarm, duress, card access, CCTV.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Properly using the meat department tools and equipment including knives, saws, wrapping machine, tenderizer, patty maker, grinder, while meeting meat department safety standards. Properly using the meat department tools and equipment including knives, saws, wrapping machine, tenderizer, patty maker, grinder, while meeting meat department safety standards.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Must have Experience doing repair work within the aerospace industry -Operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air-powered grinders, drill motors, and hand tools to fabricate, straighten, and adjust detail parts and complex assemblies as per drawings and work instructions.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Ability to use commonly used hand and power tools including screwdrivers, wire strippers, drills, saws, and conduit benders to run and protect wiring. Install conduits, pull wire and make final connections to circuit breakers, petroleum pumps, dispensers, Point of Sale consoles, tank monitors and petroleum lighting.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Cuts and trims and prepares raw meat for sale using saws, knifes, grinder, and tenderizer. We offer a comprehensive package of benefits including paid time off, health benefits (medical/dental/vision/hearing aid/pharmacy/behavioral health/employee assistance), health care reimbursement account, dependent care assistance plan, short-term disability and long-term disability insurance, AD&D insurance, life insurance, 401(k), and stock purchase plan to eligible employees.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Ability to run various small pieces of machinery such as pressure washers, saws, drills, grinders, and other. Responsible for general building maintenance repair including but not limited to the repair/replacement of bathroom door hardware, ceiling tiles seats, furniture, HVAC, plumbing, light electrical, roof and field assistance.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Standard tools used include hand tools, power tools (saws, drills), machinery (conduit cutters), multimeters, tubing bender and cutters. Standard tools used include hand tools, power tools (saws, drills), machinery (conduit cutters), multimeters, tubing bender and cutters.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Fabricate, modify and install special equipment or replacement parts using mills, lathes, welders, torch sets, plasma cutters and metal cutting saws. Perform preventative maintenance on heavy equipment and trucks to include: pavers, rollers, milling machines, dump trucks, water trucks, boot trucks, front-end loaders, scrapers, skid steers, skip loaders and motor graders.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Operate, maintain, and work near various power equipment, including, but not limited to, forklifts, man-lifts, excavators, drills, saws, hydraulic tools, and automatic machinery. 3-5 years of experience as an Industrial Electrician.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Occasionally will use hand tools, saws, forklift, pallet jack to assist customers. Ignite your career at Builders FirstSource, America’s largest supplier of building materials, value-added components and building services to the professional market.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
With concrete sawing, cutting and or removalProficiency in any and or all of the following tools: wall saw, core drill, electric saw, gas saw, hand saw, ring saws and or compressor toolsTeam oriented mindset with a desire to be trained Solid mechanical abilities Clean MVRCurrent DOT Medical CardReliable TransportationAbility to lift 50 lbs.
Full-timeExpandUpdated 20 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories.
Full-timeExpandApply NowActive JobUpdated Today
saws job in Glendale, AZ
FEATURED BLOG POSTS
5 Common Interview Mistakes
Everyone's interview process is unique in some form or fashion. Like most, your interview process is crafted so you can get the most information out of your candidates to increase hiring confidence and make the right hiring decisions. However, there are often small problems in interview processes that could ultimately affect the success of hiring decisions.
How to Get a W2 From Previous Employers
When tax time rolls around, the last thing you want to worry about is having to track down a W-2 from your former employer. Many times you won’t have to because the IRS requires companies to send these forms to all current and former employees who have earned more than $600 in the last year. Unfortunately, there are employers who don’t do what they’re supposed to. There are even times where something else may happen that prevents the W-2 from getting where it’s supposed to go.
How to Ask Someone to be a Reference + Email Templates
One part of the job-hunting process that frequently gets overlooked is putting together a list of good references. Most of the time we focus on creating the perfect resume, writing an awesome cover letter, and getting our hands on letters of recommendation. We think about what outfit we’ll wear to the job interview, how we’ll answer those tricky questions, and what our career plan looks like. But, in fact, having multiple references lined up who will speak favorably about you to a potential employer is critical to landing a job. This aspect of job searching really can’t be ignored.
Job Rejection Email Response with Examples
Glassdoor estimates that, on average, there are about 250 applicants for every job vacancy out there. If you’ve ever applied for a job, the odds are that you’ve received the dreaded job rejection email.
Structured vs Unstructured Interviews
The goal of an interview is to evaluate candidates based on their skills, personality, and knowledge. You want to choose the BEST candidate from your candidate pool, so the interview is something you can't mess up. As you begin planning your interview process, one of the major decisions you'll face is whether the interview should be a structured vs unstructured interview. So let's take a dive into the differences and sort out which circumstances warrant which interview process.
How to Describe Your Personality with Examples
Imagine you’re in an elevator with the CEO of your dream company and you get to talking. The conversation is going well and you start to imagine yourself working for their company when the CEO turns around and asks you “tell me a bit about yourself.” Would this catch you off guard or would you be able to give a clear and succinct description of who you are?
4 Ways to Make Your Job Posting More Inclusive
According to a Glassdoor survey,