Precision Castparts Corporation

In addition, we are the leading producer of airfoil castings for the industrial gas turbine market.. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.. PCC engineered product applications include all wing/fuselage structural parts; engine lock-plates/bracketry; complete passenger/exit doors; major flap support and actuation structures; spars, skins, and bulkheads; swaged control rods, cables, and actuation and flight control assemblies; and complex latches, quick release BALL-LOK pins, and specialized fasteners.. Recent engineering projects include pylon struts, interior tie rods, hold open rods, flight control rods, wing-to-body fairing support rods, door mechanisms and rods, and structural support rods for Airbus, Boeing, Embraer, and Gulfstream.. Ability to use Syteline/ESI or other ERP systems upon instruction

technician

Country
 1
 

 

 
 



United States of America
 
 


 



 
 
 State / County
 1
 

 

 
 



Washington
 
 


 



 
 
 City
 1
 

 

 
 



Woodinville
 
 


 



 
 
 Division
 1
 

 

 
 



EPD
 
 


 
 
 



 
 
 Company
 1
 

 

 
 



University Swaging
 
 


 



 
 
 Function
 1
 

 

 
 



Quality
 
 


 



 
 
 Workplace Type
 1
 

 

 
 



On-Site
 
 


 



 
 
 Position type
 1
 

 

 
 



Full Time
 
 


 
 
 
 
 
 
 Opportunity ID
 
 
 
 10155
 
 
 



 
 
 Company Profile
 1
 

 

 
 



 With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
 
 


 



 
 
 Job Description
 1
 

 

 
 



Business Profile: Since the early days of aviation, PCC has worked closely with our customers to develop and specify the best products for their applications. We've created new materials, designs, and manufacturing practices to satisfy an ever changing industry. PCC engineered product applications include all wing/fuselage structural parts; engine lock-plates/bracketry; complete passenger/exit doors; major flap support and actuation structures; spars, skins, and bulkheads; swaged control rods, cables, and actuation and flight control assemblies; and complex latches, quick release BALL-LOK pins, and specialized fasteners. Location Profile: Now part of PCC's Aerostructures Division, University Swaging is a unique machining, swaging, and assembly center providing the industry's most technologically advanced structural and kinematic control rod assemblies, flight control mechanisms, and swaged cable assemblies. Founded in 1947, the company was purchased by Primus in 2000, and before the close of the decade, expanded more than twofold into a new 110,000 square foot facility. The company's success can be attributed to continuity of leadership and a strong vision for growth of capabilities and products. Today the site benefits from shared opportunities and cooperation with KaliStrut Aerospace, which has also maintained a leading market position in the area of metallic rods for more than 35 years. Recent engineering projects include pylon struts, interior tie rods, hold open rods, flight control rods, wing-to-body fairing support rods, door mechanisms and rods, and structural support rods for Airbus, Boeing, Embraer, and Gulfstream. Precision Castparts Corp. acquired Primus International in August, 2011. Position Summary: Works with assistance and direction to use predetermined methods, operations, setups and prescribed specifications to perform in-process and final inspections of products such as final and in-process machine parts, mechanical assemblies, purchased standards and accepts or rejects components based on detailed specifications and customer requirements. Uses various measuring devices to perform required inspections and notifies area supervisor of any malfunctioning or non-conforming units or systems. Works from blueprints, digital models, diagrams or other customer specifications, and uses inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Verifies part quantity and manufacturing order compliance for process sequence and order. Monitors workflow, material resources and production schedules. Shift: Monday-Friday 5:00am-1:45pm Primary Duties & Responsibilities: <ul> <li>Able to read and interpret manufacturing drawings and customer blueprints. </li><li>Be thoroughly familiar with the scope and limitations of the Liquid Penetrant technique. </li><li>Perform other assigned non-inspection functions such as racking, masking or cleaning of production parts. </li><li>Prepare and process parts through PT inspection system, including final evaluation, making accept/reject decisions, and completing proper documentation of results. </li><li>Set up, calibrate, and standardize NDT equipment. Perform daily and weekly system checks. </li><li>Perform receiving inspections (before processing) as needed and immediately report any damage or discrepancy. </li><li>Be capable of providing the necessary guidance and /or supervision to trainees and Level 1 personnel. </li><li>Assist with (and perform as required) in internal and external system audits, and CAPA (Corrective Action/Preventative Action) implementation. </li><li>Will require use of personal protective equipment (PPE) during certain tasks (goggles, safety glasses, aprons, boots, gloves, hearing protection, etc.) and be expected to comply with safety directives and policy. </li><li>Will be exposed to chemicals/solvents and occasional fumes, wet/humid conditions, low-level lighting, and moderate noise level. </li><li>At times require heavy lifting (Up to 35lbs.). </li><li>Work closely with inspectors and area leadership to complete work and prioritize tasks. </li><li>Perform other job-related tasks as assigned by management. </li></ul> Required Skills/Experience: <ul> <li>High School Diploma or equivalent </li><li>3+ years aerospace experience required </li><li>Certified Level II NDT (PT/MT) Technician </li><li>Good knowledge and understanding of material and manufacturing processes in relation to NDT technology </li><li>Good knowledge of common inspection measuring equipment including, but not limited to, thread gauges, micrometers, digital thickness gauges, measuring tapes and rulers </li><li>Basic English language reading/writing, Basic use of math and PC skills, including Microsoft Office (Word, Excel) </li><li>Ability to use Syteline/ESI or other ERP systems upon instruction </li><li>Good organizational and time management skills </li><li>Ability to professionally document and communicate work instructions and inspection data </li> <li>Attention to detail and good manual dexterity </li><li>Ability to read, follow detailed instructions and interpret complex manufacturing drawings and quality specifications/requirements </li><li>Willingness to work cooperatively with others and to train other candidates for NDT certification </li><li>Able to maintain a high level of productivity with focus on efficiency, maximum use of time and materials in a fast paced quality driven environment </li></ul> Additional Information This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful application must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Political Asylees and Refugees.
 
 


 



 
 
 
 1
 

 

 
 



All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. 
 
 


 
 
 For informational purposes only, the range of pay for this role is $25 to $35 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.

START NEW SEARCH