- UpvoteDownvoteShare Job
- Suggest Revision
Keywords: fabrication, sand/prep, cosmetic repair, restore, fiberglass, filler, painting, Works with a variety of metals and plastics, as well as glass, and mechanical parts, Collison, Auto body, Truck body, Framework, Refinishing, Commercial body work, Fleet repair, Collision technician, Truck repair, Disassembling/assembling vehicles, Lead painter, Upholstery, Bodywork, Trim repair, Rebuild/teardown.
Full-timeExpandApply NowActive JobUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
Knowledge & Skills RequiredAutomotive Service Excellence Certificates (ASE) in Collision Repair & Refinishing and/or Inter-Industry Conference on Auto Collision Repair Certificates (ICAR) preferred.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Work Environment: Location: industrial construction sites and/or fabrication shop Mobility Barriers to Access Job Site: Uneven ground level Obstructed pathways Work performed at low and/or high elevations Work performed in confined areas Climatic/Environmental Conditions at Job Site: Predominately outdoor climate May be exposed to extreme hot or cold weather Excessive humidity, rain, etc.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Summary/Objective:The Painter/Blaster is responsible for preparing and coating various surfaces to ensure the highest quality and durability. Operate sandblasting equipment to remove paint, rust, dirt, or other debris from surfacesPrepare surfaces by cleaning and masking areas that are not to be blastedInspect surfaces to ensure they are properly prepared for coating or repairFollow safety procedures and wear appropriate protective equipmentMaintain and clean sandblasting equipmentCollaborate with team members to complete projects efficiently and effectivelyMove platforms and various products using an overhead crane or forklift.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Lead assessment, due-diligence, communication, and mitigation of supplier risk for assigned area of supply (fabrication, machining, forging, casting). Experience as a manufacturing engineer with materials, fabrication, machining, forging, and casting.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Job DescriptionThe primary responsibility of a Shop Technician is for inspection, disassembly, reassembly and testing of generators, motors, pumps, and gen sets. Must perform standard maintenance on all shop equipment used in mechanics area.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Subsea Fabrication Manager Position Requirements 8 years’ experience in similar role as Fabrication Manager Past experience either at fabrication yards onshore or in offshore construction companies handling fabrication onshore International Experience (i.e. past experiences shall include fabrication scopes outside of the US) Extremely committed and focused on HSE and Quality #LI-Onsite.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Qualifications:Competitive candidates must demonstrate the following:Excellent customer service and decision-making skillsMust be detail oriented and show a high level of accuracyPhysical agility to allow for stooping, bending, and some physical lifting to adequately evaluate vehicle damage and create repair estimatesAuto collision repair, auto damage estimating, and/or auto insurance appraiser experienceMotor Vehicle Physical Damage Appraiser License.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Performs other work-related tasks as assigned by the Fabrication Manager, or Supervisor. Select equipment and plan layout, fabrication, assembly and welding. - Exposed to occasional hot and/or cold weather depending on outside climate conditions and warehouse temperature since the shop floor is neither airconditioned nor heated.
$25 an hourExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Inspector will be assigned to a variety of industrial projects related vendor/shop inspections or vendor surveillance including QAQC inspections during the fabrication of various equipment and machines.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Working Conditions: Normal office environment, machine shop and/or power plant environment Requires operation of a motor vehicle; valid state Driver’s License. Participate in a Team environment to develop work scopes, resource allocations and schedules in conjunction with the Planning Department, Shop Supervisors and Shop Management.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Over 90% of our Shop Managers started as lube techs. for extended periods of time and perform activities involving holding, grasping, pulling, and turning Must be willing to work in hot/cold weather conditions if necessary Must have reliable transportation to and from the shop #LI-DNI#DBHVOL.
$15 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Project Manager (Structural Steel Fabrication) JOB DESCRIPTION An AISC Fabricator in the Houston Metro is looking for someone with your experience. Project Manager Requirements: +5 years project management experience with emphasis on structural steel fabrication.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Hands-on experience (e.g., mechanically inclined hobbies, experience in mechanic shop, hands-on with mechanical systems, welding). Working knowledge of robotics platforms and tool kits both vendor specific (such as ABB, Yaskawa, Kawasaki, Kuka, etc.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Experience with detailed engineering with EPC, Engineering/Procurement, project engineering and field experience (fabrication site and offshore) preferred. Coordinating and controlling engineering activities with different E&C engineering centers, in charge of design, input to scope of work for subcontracting & fabrication and Installation of an entire project (or portion of project) up to the scheduled completion, in accordance with Air Liquide HSES corporate policies, contractual commitments (design data, codes, classes etc.
Full-timeExpandApply NowActive JobUpdated Yesterday
body shop painter fabrication auto jobs in Houston, TX
FEATURED BLOG POSTS
How Does Salary Pay Work? (Compared to Hourly Pay)
At the bottom of each job advertisement, companies label a role as salaried or hourly. Both methods will get you paid (yay), but each in very different ways. So, it's essential to figure out how does salary pay work? While employees paid by the hour are paid based on how long they work, employers pay salaried employees a fixed amount.
The Quiet Quitting Phenomenon
The term, quiet quitting, was coined in 2009, but only now is it gaining traction as young Millennials and Gen Z workers are experiencing record levels of burnout. With the pandemic and the state of the economy, young employees are feeling the pressure. So, quiet quitting comes into effect when that pressure is exasperated by work stress and no managerial support.
How Does Salary Range Work (With Examples)
What are your salary expectations? Do you know? Establishing a salary that compensates you fairly and keeps you happy at work can feel like taking a shot in the dark. And employers sure don’t make learning budgets easy!
Guide to Hiring a Teenager
Teenagers are full of life. They bring energy and adaptability that may be hard to get from older workers, but does that mean that hiring teens is beneficial? Well, it depends. As you debate whether or not you should integrate teenagers into your workforce, there are some things that you should know first.
10 Best Tips to Find a Job When Relocating
Are you planning to move? That’s great news, but now you might wonder what that means for your job. Some people are lucky – they can relocate and keep working the same position as always, just remotely. For others, however, this isn’t an option. They must search for and land a job in their soon-to-be new city. This can be intimidating, given that getting a new job even under normal circumstances can be challenging. Now you’ll have to overcome additional hurdles. This article provides valuable tips on how to find a job in another state. Because it can be done! Read on to learn how.
How to Re-apply for Your Old Job Professionally
Have you recently started a new job only to find that you miss your old one? Maybe you didn’t realize how good you had it, and now you regret leaving. Don’t worry. You’re not the first person to feel this way, and you might even be able to return to your old job if you play your cards right.
Looking for New Candidates?
Before the turn of the century, recruiters could put their "help wanted" ads in the newspaper, and applications would pour in. Since then, recruiting has turned a new page. The use of the internet and other technologies allows recruiters to broaden their candidate pool for the simple reason being