- UpvoteDownvoteShare Job
- Suggest Revision
Supporting Scrap Reduction Initiatives and promote / drive "Zero Defect" mentality within the plant using proactive tools such as Lean (TEOA), Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, Advance Product and Quality Planning (APQP) Statistical Process control (SPC) and Process Failure Mode and Effects Analysis (PFMEA.
ExpandApply NowActive JobUpdated 3 days ago - UpvoteDownvoteShare Job
- Suggest Revision
You will design, recommend revisions, and install quality control systems, develop and document analytical methods for establishing reliability of products and their components. Communicate and support Incoming Quality (IQE) / Supplier Development (SDE) personnel to coordinate inspection and action of non-conforming supplied products within Value Stream.
ExpandApply NowActive JobUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
Supporting Scrap Reduction Initiatives and promote / drive Zero Defect mentality within the plant using proactive tools such as Lean Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, Advance Product and Quality Planning (APQP) Statistical Process control (SPC) and Process Failure Mode and Effects Analysis (PFMEA.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Knowledge of Quality Management Systems e.g. CAPA, Product defense, Pest Control. Demonstrates leadership through a commitment to communication, work habits and be fully competent in all aspects of a wide variety of processes including maintaining safety, troubleshooting/problem solving, decision making, organizing/planning, Nestle Health Science's core behaviors, administrative, quality appraisals, sampling plans, manufacturing audits/process audits, statistical techniques, production control systems, manufacturing document review, test equipment and training.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Support and ensure adherence to procedure Supporting Scrap Reduction Initiatives and promote / drive “Zero Defect” mentality within the plant using proactive tools such as Lean Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, Advance Product and Quality Planning (APQP) Statistical Process control (SPC) and Process Failure Mode and Effects Analysis (PFMEA) Be an active participant and advocate of the Lean methodology.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Plans include typical sections, profiles, work zone traffic control plans, general plans, utility and drainage plans, traffic control plans, pavement marking plans, erosion and sediment control plans, guide sign layouts, etc.
InternExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
As a key member of the Embedded Systems and Controls Team, define, design, develop and deliver control systems integrated into high voltage power supplies to satisfy technical, project, and quality requirements.
ExpandApply NowActive JobUpdated 3 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The Federal Aviation Administration (FAA) is responsible for ensuring that Air Traffic Control Specialists provide the flying public with a high level of safety and professionalism. A well-trained Air Traffic Control (ATC) workforce plays an essential role in fulfilling this responsibility.
$100,001 - $125,000 a yearFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Excellent task management skills and knowledge of other engineering design and analysis tools in the field of power conversion, power management, digital and analog control. Background in Power Electronics topologies, and digital control using PID control loops, and applications that implement Silicon Carbide, Gallium Nitride, or Silicon Devices.
Full-timeExpandApply NowActive JobUpdated 3 days ago - UpvoteDownvoteShare Job
- Suggest Revision
To provide such air traffic services, the FAA trains new air traffic control specialists and provides recurrent training to current Air Traffic Control Specialists. Responsibilities include effective communications with FAA and contract personnel, execution of the CTS contract, performance and financial management of human and budgetary resources, assisting with the development of training plans, development and maintenance of training material, conducting training, supporting training administration, and adhering to the highest quality standards throughout the operation.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
As an apprentice, you will learn the business from the ground up, this will entail full administrative responsibilities, including customer service, interacting with both our stores and customers, completing administrative/clerical tasks, photography of jewelry for intake/tracking and learning the basics of jewelry repair starting with polishing and quality control, all while you train toward becoming a bench jeweler.
$18 - $19 an hourFull-timeExpandApply NowActive JobUpdated 3 months ago - UpvoteDownvoteShare Job
- Suggest Revision
Instrumentation/Controls Technician working under the supervision of the Maintenance Supervisor is responsible for performing routine maintenance and emergency repairs of the plant instrumentation systems, control systems, computer systems and associated equipment.
Full-timeExpandApply NowActive JobUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
The Office of the New York State Attorney General's (OAG) Medicaid Fraud Control Unit (MFCU) seeks a forensic accountant/auditor (FAA) for its Long Island office in Hauppauge. Medicaid Fraud Control Unit - Hauppauge (Suffolk County.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Develop PPAP and APQP documents as required and support Director of Quality as needs arise. They are seeking an experienced Senior Quality Engineer to join their team. Senior Quality Engineer.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
RequirementsEducation and Experience :Bachelor's degree in a science related field. Perform routine laboratory chemical analysis on finished product, stability, raw material, and/or investigation samples, as assigned, using HPLC, UPLC, GC, UV-vis, FTIR, ICP, TOC and other wet chemistry techniques in accordance with the prescribed approved analytical test method.
$50,000 - $80,000 a yearFull-timeExpandApply NowActive JobUpdated Today
quality control jobs Title: field tech Company: Joerns Healthcare in Hauppauge, NY
FEATURED BLOG POSTS
How to Decline a Job Offer You Already Accepted
When you think about it, turning down a job offer is not the worst position you could be in. If you’ve been lucky enough to consider multiple job offers, well, then you’re lucky enough.
How to Practice Fair Chance Hiring for People With Criminal Records
Usually when you think of your dream hire, you think of someone who is respectful, trustworthy, reliable, and has sound judgment, right? As you envision your ideal candidate with these qualities, the last person you think of is someone with a criminal record.
6 Common Mistakes to Avoid When Employer Branding
Currently, job searchers are putting extra effort into researching employers. The information they find plays a major role in whether they will pursue an opportunity with you or look for jobs elsewhere. That is why it is now more important than ever to be proactive and intentional when showcasing your workforce and workplace culture. Having a well crafted employer branding strategy can help you strategize and influence your potential candidates so they see your business in the best light. But in order to do that, you should be aware of some of the most common mistakes that employers make.
What to Say When Terminating an Employee
Terminating an employee is an inevitable part of doing business. Whether you’re re-structuring your department or you’ve identified a few employees who’re not living up to your expectations, letting people go is necessary for keeping your workforce healthy and thriving.
How to Utilize Keywords for Your Job Ads
Before we give you the scoop on how to utilize keywords in job ads, it would be helpful if we defined what keywords are and why they are important. In simple terms,
What Makes a Good Paid Time Off (PTO) Policy
The world of work has undergone some major transformation in recent years. From remote and flexible work to increased emphasis on employee benefits and wellbeing, companies nowadays have to be very intentional about their HR policies and how they approach talent acquisition.
How to Answer the Interview Question: What is Your Communication Style?
As a job searcher, you probably have so many questions about job searching. However, once you've landed an interview, your excitement takes your questions to a whole new level. What will you wear? Will you know how to answer all the questions? Have you practiced giving nice firm handshakes?