- UpvoteDownvoteShare Job
- Suggest Revision
DescriptionThe Controls Engineer II is responsible for the advanced support of all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working with minimal supervision.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Experience in mechanical, electrical, Computerized Maintenance Management System (CMMS), control network/HMI components, and Programmable Logic Controls (PLC) programs. Experience in mechanical, electrical, Computerized Maintenance Management System (CMMS), control network/HMI components, and Programmable Logic Controls (PLC) programs.
Full-timeExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits. The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge recycling and waste sorting equipment.
ExpandApply NowActive JobUpdated 11 days ago - UpvoteDownvoteShare Job
- Suggest Revision
In PLC code development and motion control systems. to understand and troubleshoot PLC and HMI programs, instrumentations, and drives on the product line. data to identify any improvements needed and to impact the production line and PLC programs to produce the best results.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Minimum 2+ years experience in PLC & HMI systems support, familiarity with die cast, injection molding or similar manufacturing processes is strongly preferred. Use TIA Portal and S7 (Siemens) as well as Allen Bradley tools to provide remote support (via teleservice connection) to PLC and HMI systems in the field for required changes / maintenance / troubleshooting, etc.
Full-timeExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Proficiency in Firmware/Programming Development including STM32 ARM, Python, PLC, Labview, C. Printed circuit board (PCB) design and layout including analog and digital components/circuits. Proficiency with PCB Design and Simulation Software including Altium and SPICE.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
This position will primarily be involved in the specification, design, and configuration of programmable logic controllers (PLC), distributed control systems (DCS), manufacturing execution systems (MES), and data historians (OSI PI.
ExpandApply NowActive JobUpdated 11 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Requirements:The ideal candidate has at least 3 years of industrial maintenance experience including PLC and high voltage experience. You will work with PLC drives. Ideal candidates include military avionics candidates, ETs, EMs, MMs. Must be willing to work 6-day work weeks.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Founded in 1964 and based in Glen Arm, MD, PLC seeks a landscape designer and salesperson; the position is full-time (40+ hours per week). Pinehurst Landscape Company (PLC) is regionally recognized for the creation of innovative, award winning landscapes that combine fine stone craftsmanship with quality garden design.
ExpandApply NowActive JobUpdated 12 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Proven ability to read/write and troubleshoot PLC code (Omron, Allen Bradley, or Siemens) including ladder logic and structured text. The responsibilities include PLC programming, SCADA system development, process implementation and optimization, and troubleshooting across multiple systems.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
PLC and HMI software development for energy storage systems. Our Client in the Space, Defense, and Power Systems Industry is seeking Industrial Control Engineers who specialize in Programmable Logic Controller (PLC) based control systems.
ExpandApply NowActive JobUpdated 5 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Demonstrated knowledge of one or more of the following: Wonderware System Platform & InTouch, Allen Bradley PLC systems (PLC5, SLC500, and ControlLogix) and associated I/O systems, Allen Bradley VFDs / Soft Starters / Servos, Allen Bradley Centerline MCCs, process instrumentation (analog valves & transmitters.
Full-timeExpandApply NowActive JobUpdated 3 months ago - UpvoteDownvoteShare Job
- Suggest Revision
Candidates must have a minimum level of Electronic Control and/or PLC programming experience to be considered. Remedi SeniorCare is looking to hire an Engineering Technician with production and manufacturing experience.
ExpandApply NowActive JobUpdated 7 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Design and test DSP based digital control algorithms, FPGA modulators, and PLC based high-level system controllers. Experience with medium voltage power distribution, solid-state-transformers, and printed circuit board design experience highly desirable.
Full-timeExpandApply NowActive JobUpdated 3 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Ideal Candidates will have: Experience with Process Control Systems such as programmable logic controller (PLC) ladder logic and Human Machine Interface (HMI) programming. Education and/or experience in designing fire alarm systems and sprinkler systems and developing FPS drawings and specifications.
ExpandApply NowActive JobUpdated 3 days ago
osisoft plc jobs in Baltimore, MD
FEATURED BLOG POSTS
How to Get Into The Trades: Step-by-Step Guide
Getting a trade job can be a great career move if you like variety and prefer to learn on the job instead of in an academic setting. A trade job can offer security and be a lucrative career path as the demand for skilled trade workers continues to grow.
How do Good Interviewers Prepare for Interviews?
Just like candidates take the time to research you and your company, you should take the time to prepare for the interview. Preparing for the interview doesn't just reflect well on your employer brand and create a better candidate experience. Preparation also helps prevent bad hiring decisions. Bad hiring decisions are usually a result of poor execution during the hiring process. However, going into an interview fully prepared and ready to evaluate candidates will help avoid bad hires. So, here are 6 interview preparation tips for employers.
How to Get a Union Job? A Step-by-Step Guide
A union job can significantly impact your job security, pay, and employment benefits. Whether this is your first job or you have years of experience, a union job can offer much-needed protection in a labor market where employees are hired and fired at will.
How to Write a Statement of Interest the Best Way
Your life's goal is to work for Company A. Their brand, their product, their reputation—it's safe to say you're a fan. The only problem is that their careers page never highlights the role that matches your skills and experience. It's a bummer for sure, but don't fret.
Should I Hire for Potential Over Experience?
The workforce is shifting every day. In fact, research from the World Economic Forum (WEF) shows over half of employees around the world will need to upskill or reskill by 2025. The rapid rise of digital literacy, automation, and new technologies will quickly supersede businesses that don't train ahead of the curve. With the dire need to invest in training, it's evident that hiring someone with experience isn't that much different than hiring someone without it.
How to Decide Between Two Job Offers: 10 Practical Tips
It’s arguably a good predicament to have. You’ve applied to many jobs, interviewed multiple times, and now find yourself with two legit job offers. Nice! But although this is a feel-good validation of everything you have to offer, a daunting choice lies ahead. How do you decide which job will be the best fit for you?
Why Work in Sales? 9 Reasons & Tips on Answering as an Interview Question!
Working in sales can be demanding and challenging, but it can also be gratifying. Sales is an excellent career with a clear path full of excitement and potential for growth. So, if you're contemplating careers and have wondered "why work in sales?", keep reading to determine if sales is a suitable role for you.