- UpvoteDownvoteShare Job
- Suggest Revision
Set-up, operate and maintain a variety of CNC/ASM machines which perform a variety of operations such as, but not limited to; boring, reaming, turning, milling, drilling, tapping, etc. Typical dexterity to set up and operate miscellaneous equipment.
$34.39 an hourExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Perform routine labor (potholing, equipment set-up, conduit/duct/cable placement, set pedestals) as required. We currently run multiple directional drilling, installation/maintenance, and restoration crews across the state.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Background in the aerospace or medical field machining using exotic materials a plus; Studies blueprint and set up sheets to determine machining to be done, dimensions of parts, and permissible tolerances, and planned sequence of operations on the machine.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Good fit for those with building maintenance, construction, lawn care, pest control experience, or with previous experience working at Ben Franklin, Hero Plumbing, TruGreen, Orkin or similar work backgrounds.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Event Set-Up and Maintenance Crew Member position will perform manual set up and tear down of events at the Minneapolis Convention Center. Cleaning and simple maintenance work on the building's interiors and exteriors as assigned in order to ensure the building and its facilities are maintained in a healthy, orderly, and sanitary manner.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Perform maintenance, testing, reconditioning and repair on circuit breakers - low voltage 480 volt (molded case and air-magnetic) medium voltage up to 15 KV (air-magnetic and vacuum) Prefer experience with most of the following or similar: MCC's, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Provide training and instruction to your mechanics in Bowlero Corp’s machine area, safety procedures and standards of operation for bowling equipment, building maintenance, and preventative maintenance.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
3+ years of CNC lathe set-up experience. Understand tooling requirements to set-up and operate machines in the department, including pre-setting of tools. Seeking a 2nd shift CNC Lathe Lead candidate to perform full set-ups in a job shop environment on dual spindle, multi-axis, twin turret lathes (Nakamura, Puma, and Doosan.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
The Property Manager will be responsible for the lease-up of a new construction building and managing day-to-day operations of properties, including marketing and leasing: rent collection; supervision of site staff, maintenance staff, and caretakers; budget management and property conditions; maintaining positive relations with neighbors, funders, regulatory agencies, and both internal and external PPL customers, all with an elevated level of customer service.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Set up new accounts in accordance with established credit policy. Located in the heart of bustling downtown Minneapolis, the Westin makes its home in the iconic Farmers & Mechanics Bank building, which is on the National Registrar of Historic Buildings.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Building Engineer is responsible for completing work orders, grounds maintenance, painting, caulking, HVAC, plumbing, drywall, electrical and completing maintenance on buildings as needed.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Molding and Spinning Set Up Technician will work with the shift supervisor to set up, operate, troubleshoot, document, and communicate on all spinning lathes, injection molding, and compression molding machines.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Set-Up Technician Preferred Knowledge, Skills and Abilities. Set-Up Technician Duties a nd Responsibilities. Setup Technicians are responsible for the set-up and tear downs of injection molds in molding equipment, set-up of required auxiliary equipment, complete first piece inspection of production run, ensure equipment is running at prescribed cycle per work instructions, and assist, where necessary, press operators.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Aircraft Maintenance Technician (AMT) is a critical TechOps role at Delta. Family care assistance through fertility support , surrogacy and adoption assistance , lactation support , subsidized bac k-up care , and programs that help with loved ones in all stages.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Load and unload building products that weigh up to 100 lbs. Keywords: CDL A, CDL B, driver, commercial drivers license, building products, job site, building materials, distributor, distribution, touch freight, load, unload, commercial vehicle and delivery.
ExpandApply NowActive JobUpdated Today
set up building maintenance jobs in Minneapolis, Enfield, Connecticut
FEATURED BLOG POSTS
5 Ways to Measure Candidate Experience
Your candidate experience is made up of 4 essential parts
How to Stall a Job Offer Politely
You did it! After several weeks of looking for a new job and undergoing grueling interviews, you finally have a job offer. Although this may be very exciting, accepting a job offer means that you’re making a long-term commitment to your future employer. So, even if you’re eager to leave your current job, this isn’t a decision you should take lightly.
How to Get a Job in a New City - Best Tips to Follow
When your dream job posts, will you be ready? What if that dream job was in a faraway city or a different continent…would you move for it? Most of us have dreamed about what it would be like to accept a job in a new place at one time or another. But when it comes to actually making a move, it’s usually the logistical details that give us pause. The key to job searching in a different location is to have a plan.
What is a Policy of Non-Retaliation & How to Create One
Your company probably has many policies in place – anti-discrimination policies, equal opportunity policies, ethics policies, and so on. However, it is important to re-evaluate whether you have a policy that covers every situation. Say for instance one of your employees submit a complaint in good faith to their supervisor. To their surprise, they are met with retaliation, such as demotion, defamation, or even termination.
When to Tell Your Boss You're Job Searching
The Bureau of Labor Statistics has found that individuals, on average, have 12.4 jobs throughout their working life. So regardless of where you are on the career ladder, it’s inevitable that at some point, you’ll begin looking for another job. That said, you might be wondering,
What Questions Can You Not Ask in an Interview?
It can be stressful to interview candidates to fill an open role at your company. Maybe your boss is on you to hire someone who’s absolutely perfect as soon as possible. Maybe you don’t have a ton of experience yet in conducting interviews. Whatever the case, there’s a lot to take under consideration when you’re the one in charge of interviewing. For instance, “What questions can you not ask in an interview?” may very well be running through your mind given its legal ramifications. Knowing exactly which interview questions are off-limits (and which are fine to ask) will boost your confidence as you continue to search for the ideal new hire.
How to Prepare to Be Fired - What You Need to Do
If you’re reading this, let me be the first to tell you how sorry I am. Getting fired feels crappy, disheartening, hurtful, and all the other bad, sad words. But here’s what I want you to do. First, let yourself fumble for a minute. Then, pick your head up — sometimes getting fired is a blessing in disguise. If you think termination is around the corner, we’ll teach you how to prepare to be fired and what to do next so you land somewhere even better.