FastTek Global

· BS in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Computer Science, or Physics. · Experience with AVL PUMA/IndiCom and ETAS INCA software. · Experience with engine dyno setup and testing. Tests will be running in one or multiple dyno cells.. Bachelor Degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Computer Science, or Physics

test engineer

Test Engineer #993090 <ul><li>100% ONSITE contract position in Pontiac, Michigan with potential for extension/conversion</li><li>Onsite 5 days a week. M-F, 8AM – 5PM. </li><li>May occasionally be required to support remotely on weekends. </li><li>Will be OT if there is weekend work needed.</li><li>Remote on the weekends. Hours are going to vary on the weekends if work is needed.</li></ul> Job Description: Role Summary:· We are looking for high-performing development and validation engineers with engine, transmission, and drive unit experience. · Responsibilities include planning, developing, and executing subsystem level tests in a world class testing and development facility. · Tasks also include data analysis, calibration development, identifying opportunities for data reduction, and leading the migration of lab-based activities to math. · This is an assignment where creativity, initiative and independent judgment are involved, and effective cross-organizational teamwork is crucial. Key Responsibilities• Follow development and validation hardware through readiness process - support setup and debugging to assure test readiness• Track and report on testing progress and issues• Develop and implement first-time capable tests for hardware development and validation• Lead diagnosis and resolution of issues that occur during setup and testing• Interact with facilities, technical leads, calibration teams, hardware release engineers, and others to improve process and test efficiency• Utilize post processing tools to assure data quality and track usefulness of data in generation of final reports• Implement standard work processes and procedures globally• Support math-based activities, migrating additional work from Road and Lab to Math (RLM) based models and data analysis• Train, mentor, and develop new engineers Education and Training· BS in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Computer Science, or Physics Required Skills and Experience:· Minimum 2 years of experience in automotive engineering with engine, transmission, or drive unit knowledge· Demonstrated drive for results· Excellent planning and problem-solving skills· High level of oral and written communication skills· High level of interpersonal skills to work independently and effectively with others, and ability to establish peer relationships.· Ability to prioritize work and resources, and work independently with minimal direction· Proficient with computer and data acquisition systems· Experience in data analysis to optimize testing or model results· Ability to travel as required for offsite testing (less than 15%) Preferred Skills and Experience· Experience with AVL PUMA/IndiCom and ETAS INCA software· Exposure to propulsion system calibration in test and vehicle environment· 2-5 years of experience with engine, transmission, or drive unit testing, calibration, or hardware development· Experience with engine dyno setup and testing· Self-motivated and driven. We’re looking for individuals that will be able to contribute quickly and drive for results, rather than needing continuous direction and oversight. High level overview – they are responsible for running an engine in a variety of different test cells to test the engines lubrication and ventilation systems. 20 or so different tests they call “standard work” that they would run for a particular engine. This is what they execute and are looking for help with this Typical Day in the Role:Arrive at work, first thing is to check on the status of their tests. Tests will be running in one or multiple dyno cells. Access the state of testing, confirm that the testing is going as planned and troubleshoot if it is not. Working as a team to keep that testing moving forward. Reporting out the status of their testing, what is going well and what is not. Document what they have done through test reports. Make sure the data is being collected correctly and analyze results. They will be working with many other people throughout the day. Working with a couple other colleagues doing similar work, but also interacting with the technicians, lab engineers and people from the calibration team program team design release engineering. Very collaborative role. Must have good people skills. Work environment - Laboratory Testing Facility, PPE requirements to be on site and access areas of the facility The testing that this group does is going to be executed on the next design of engines, so they will be working on and testing a state of the art future engine designs for the company. Things they work on will be in the marketplace, can see vehicles on the road that you have contributed to. Candidate RequirementsOne of the following is required:• Bachelor Degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Computer Science, or Physics Years of experience: • At least 2-4 years • lubrication and vents experience – this experience will help, but not a must have • Specific engine experience is a bonus Top 3 must-have hard skills• Familiarity with engines (gasoline and/or diesel) and associated hardware• Familiarity with working in a lab environment (e.g. safety, instrumentation, troubleshooting)• Familiarity with data post processing (e.g. data review, identify good vs. bad data, presenting results effectively) Additional Info:At FastTek Global, Our Purpose is Our People and Our Planet. We come to work each day and are reminded we are helping people find their success stories. Also, Doing the right thing is our mantra. We act responsibly, give back to the communities we serve and have a little fun along the way. We have been doing this with pride, dedication and plain, old-fashioned hard work for 24 years! FastTek Global is financially strong, privately held company that is 100% consultant and client focused. We've differentiated ourselves by being fast, flexible, creative and honest. Throw out everything you've heard, seen, or felt about every other IT Consulting company. We do unique things and we do them for Fortune 10, Fortune 500, and technology start-up companies. Our benefits are second to none and thanks to our flexible benefit options you can choose the benefits you need or want, options include: • Medical and Dental (FastTek pays majority of the medical program)• Vision• Personal Time Off (PTO) Program• Long Term Disability (100% paid)• Life Insurance (100% paid)• 401(k) with immediate vesting and 3% (of salary) dollar-for-dollar match Plus, we have a lucrative employee referral program and an employee recognition culture.FastTek Global was named one of the Top Work Places in Michigan by the Detroit Free Press in 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023!To view all of our open positions go to: <a>https://www.fasttek.com/fastswitch/findwork</a>Follow us on Twitter: <a>https://twitter.com/fasttekglobal</a>Follow us on Instagram: <a>https://www.instagram.com/fasttekglobal</a>Find us on LinkedIn: <a>https://www.linkedin.com/company/fasttek</a>You can become a fan of FastTek on Facebook: <a>https://www.facebook.com/fasttekglobal/</a>

START NEW SEARCH