- UpvoteDownvoteShare Job
- Suggest Revision
The Mobile Trailer Technician II will be responsible for performing certified DOT inspections, Preventative Maintenance inspections, light repairs, and other duties as assigned such as aluminum and chem-lite, trailer brakes, air lines, auxiliary pumps, and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body and framework.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Responsibilities: Directly supervise the Service Department employees (Shop Foreman, Intake Coordinators, Technicians, Diagnostics, Parts Specialist, Drivers, Porters and Administrative Assistant.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Over 90% of our Shop Managers started as lube techs. for extended periods of time and perform activities involving holding, grasping, pulling, and turning Must be willing to work in hot/cold weather conditions if necessary Must have reliable transportation to and from the shop #LI-DNI#DBHVOL.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Whole Body: Stocker (Vitamins, Supplements, Body Care, Clothing and gifts) Prepared Foods: Deli Counter Service, Kitchen, Food Prep, Dishwasher, Culinary Venues (Pizza Maker, Sandwich Maker, Runner: Hot Food / Salad Bar.
Part-timeExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Communicate proposed changes and ideas with Machine Shop Supervisor and Engineering Manager to help increase machining efficiency, output, and part quality. Essential Duties & Responsibilities:Must be able to program complex parts and surfaces using MasterCam software and is responsible for proving out his programs.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Perform in-shop mechanical repairs, upgrades, and packaging of turbomachinery. Perform and promote safety standards within shop and field environments. Organize and maintain an efficient repair shop area.
ExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Explore trade-space of potential ASIC/FPGA technologies and determine the optimal parts, weighing Schedule, Cost, Risk, Area, Power (SCRAP) vs. As an FPGA Engineer on the Boeing AvionX team, you will manage and coordinate a team developing state-of-the-art digital ICs/SoCs to support the most critical programs across the Boeing Commercial and Defense enterprise.
ExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Licensure: Certification or licensure by state and/or national governing body in of the following areas: art, recreation, or music therapy. Qualifications QUALIFICATIONS/REQUIRMENTS Education: Bachelor's Degree from an accredited college or university in Art, Music, or Recreation therapy, humanities, social work or related therapeutic discipline, or a Masters degree in Art Therapy, preferred.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Experience with Product Development Process (PDP) Material Review Board (MRB) experience Machine shop or electronics manufacturing inspection experience. Production Parts Approval Process (PPAP) experience.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Lean / Six Sigma Green or Black Belt certification, ASQ Certified Quality Engineer (CQE) and / or Certified Quality Improvement Associate (CQIA) Seeking a Component Engineer to ensure the quality of the components on complex weapon's systems that help ensure our nation's defense.
ExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Should be able to operate metal, woodworking, and hand tools to make and repair parts. Employee will need computer skills to work in SAP to acquire notifications, work orders, requisition parts for work orders, and enter their time against these work orders.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
$42.4 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Material Handler/Parts Cleaner (1st Shift) - O'Neal Steel - Dallas/Grand Prairie, TX. O'Neal Steel has an opening for a (1st Shift) Material Handler/Parts Cleaner at our Dallas/Grand Prairie, TX facility.
ExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Responsible for all required paperwork of area or machine assigned examples: Statistical Process Control (SPC) charts, logbook entries, and maintenance checklist for the body-makers; or bills of lading, inventory sheets, and warehouse tags for the warehouse area.
ExpandUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Work in conjunction with other shop and jobsite personnel under the direction of shop supervisor. · Use welding and cutting equipment to make repairs or fabricate special parts and customization of equipment.
Full-timeExpandApply NowActive JobUpdated Today
parts body shop jobs in Arlington, TX
FEATURED BLOG POSTS
How to Professionally Reschedule a Job Interview Without Destroying Your Chances
You’ve practiced answering common interview questions and refined your “greatest weakness.’ Nothing can stop you until BAM! The flu hits your household. Or you ran over a nail and popped a tire en route to the interview. When you need to pivot, there’s a good, better, and best way to reschedule a job interview. Here’s how to do it professionally, so you can nail the gig when the timing is right.
What is a W-9 and How to Fill One Out
When you began working for yourself, you probably didn’t account for the tax reporting work that will fall on your shoulders each year. If you’re a freelancer, independent contractor, or business owner, filing your taxes is not as simple as uploading your W-2 form into some online tax preparation software. Most self-employed people need to complete a W-9 as a step for accurately reporting their earnings to the IRS. Below, you can learn how to fill out a W-9 and when to submit it.
Tightening the HR budget in 2023
With the state of the economy still uncertain, 2023 is expected to be approached with much anticipation. Human Resource leaders have many concerns, including how they will manage to accomplish their goals with budget belts already getting snug. Let’s look at some of the factors that the new year is projected to bring for HR and how to prioritize budgets to reach human capital objectives.
A Comprehensive Guide to Becoming a Better Conversationalist
Have you ever stood awkwardly next to someone at a party because you didn’t know what to say to them? How about at a networking event or on a first date? You're not alone if you’ve ever experienced this uncomfortable silence. Many people struggle to master the art of being a great conversationalist.
Why is Non-Verbal Communication Really Important?
In a world where words and phrases rule daily communication, you may wonder why non-verbal communication is important. Whether you realize it or not, you communicate more with nonverbal actions than you do with verbal communication. When you interact with your peers, people are reading your body language, facial expressions, voice, and many other factors that help fill in blanks that words can't fill.
7 Importances of Organizational Culture and How to Build It
The world of work has drastically changed in the past few years. Where a good salary and a nice office might have been enough to attract talent in the past, employees today expect flexibility, growth opportunities, and a healthy work environment. In fact, 77% of applicants say they’d consider a company’s culture before applying for a job.
Collaborative Recruiting: The Key to a Better Talent Acquisition Strategy
Talent acquisition is a multi-stage process where candidates undergo various application steps before getting hired. The unfortunate reality is that it is a labor-intense system, with the hiring manager and recruiter often handling all of the work on their own. Ask any one of them, and you will hear about the overabundance of applications and the demanding task of filtering through them to find the best candidates. The quality of talent suffers under the weight of all that work on one person's hands. It's not easy, but as many companies are starting to realize, there is a better way. The future of talent acquisition lies in collaborative recruiting!