JOBSEARCHER

Sensor_Reliability_Failure Analysis_Engineer

LHesston, KSL6 LeadNovember 12th, 2026
LTTS US Branch Hesston (CSLS0090), Kansas
Job Description: Job Description & Skill Requirement:
Key Responsibilities:
  • Field failure analysis: Set up sample return flows from dealers and warranty centers. Log, test and classify returned sensors, and report the No Fault Found (NFF) share.
  • Root cause: Direct lab analysis (X-ray/CT, cross-section, SEM/EDX) and record the root cause of each failure mode with evidence.
  • PPR and top claims: Act as the sensor expert in PPR (Product Problem Resolution) teams. Drive 8D/DMAIC actions and close the remaining top-claimed sensor cases.
  • Guidelines: Write and release manufacturing and integration guidelines, including diagnostic requirements, for Hall-effect, inductive, pressure and temperature sensors.
  • Reporting: Deliver monthly and quarterly reports, per-sensor case reports and a final report, and maintain a shared root-cause library.
Required Technical Expertise
  • Sensor technologies: Hall-effect sensors, inductive sensors, magnetoresistive (MR) sensors, pressure sensors (piezoresistive and capacitive), temperature sensors (NTC, PTC, RTD), sensing element failure modes, ASICs, sensor packaging, connectors, sealing technologies.
  • Embedded diagnostics: Signal conditioning, CAN, SENT, PWM, analog interfaces, plausibility checks, open/short circuit detection, DTC logic, vehicle log analysis, ECU diagnostic data interpretation.
  • Failure analysis: Electrical characterization, fault isolation, X-ray/CT scan analysis, cross-section analysis, SEM/EDX interpretation, decapsulation analysis, evidence-based root cause determination and reporting.
  • Problem solving methodologies: 8D, DMAIC, structured problem-solving approaches, warranty and field claim analysis, No Fault Found (NFF) reduction initiatives.
  • System integration knowledge: Sensor mounting, air gap management, torque specifications, thread sealing, connector and cable routing, ingress protection (IP) requirements, EMC considerations, mechanical protection, end-of-line (EOL) testing.
  • Deep hands-on experience is required across all listed domains, with the ability to independently investigate failures, identify root causes, and drive corrective actions through cross-functional collaboration.
Ways of Working (Critical)
  • Works independently with minimal supervision; plans own site engagement, priorities and follow-ups.
  • Confident engaging plant engineering, manufacturing, quality, dealers and supplier-facing teams.
  • Able to travel and work on-site for a few days at a time at multiple plants.
  • Strong written and spoken English; clear, evidence-based technical reports for engineers and leadership.
  • Strict handling of customer-confidential data and field-returned samples.
Preferred
  • Agricultural or off-highway vehicle experience.
  • Portuguese language skills (for Brazil site work) is an added advantage.
  • Experience writing design, integration or manufacturing guidelines and torque/assembly specifications.
  • Experience coordinating external failure-analysis laboratories and sensor suppliers.
Qualification:
  • Bachelor's or Master's degree in Electrical, Electronics, Mechatronics, Instrumentation or Materials Engineering (or equivalent).
  • 10+ years in sensor development, validation, quality or failure analysis in automotive, agricultural, construction or off-highway vehicles.
  • Proven track record of leading field-failure / warranty root cause investigations to closure.
Job Requirement Job Description & Skill Requirement:
Key Responsibilities:
  • Field failure analysis: Set up sample return flows from dealers and warranty centers. Log, test and classify returned sensors, and report the No Fault Found (NFF) share.
  • Root cause: Direct lab analysis (X-ray/CT, cross-section, SEM/EDX) and record the root cause of each failure mode with evidence.
  • PPR and top claims: Act as the sensor expert in PPR (Product Problem Resolution) teams. Drive 8D/DMAIC actions and close the remaining top-claimed sensor cases.
  • Guidelines: Write and release manufacturing and integration guidelines, including diagnostic requirements, for Hall-effect, inductive, pressure and temperature sensors.
  • Reporting: Deliver monthly and quarterly reports, per-sensor case reports and a final report, and maintain a shared root-cause library.
Required Technical Expertise
  • Sensor technologies: Hall-effect sensors, inductive sensors, magnetoresistive (MR) sensors, pressure sensors (piezoresistive and capacitive), temperature sensors (NTC, PTC, RTD), sensing element failure modes, ASICs, sensor packaging, connectors, sealing technologies.
  • Embedded diagnostics: Signal conditioning, CAN, SENT, PWM, analog interfaces, plausibility checks, open/short circuit detection, DTC logic, vehicle log analysis, ECU diagnostic data interpretation.
  • Failure analysis: Electrical characterization, fault isolation, X-ray/CT scan analysis, cross-section analysis, SEM/EDX interpretation, decapsulation analysis, evidence-based root cause determination and reporting.
  • Problem solving methodologies: 8D, DMAIC, structured problem-solving approaches, warranty and field claim analysis, No Fault Found (NFF) reduction initiatives.
  • System integration knowledge: Sensor mounting, air gap management, torque specifications, thread sealing, connector and cable routing, ingress protection (IP) requirements, EMC considerations, mechanical protection, end-of-line (EOL) testing.
  • Deep hands-on experience is required across all listed domains, with the ability to independently investigate failures, identify root causes, and drive corrective actions through cross-functional collaboration.
Ways of Working (Critical)
  • Works independently with minimal supervision; plans own site engagement, priorities and follow-ups.
  • Confident engaging plant engineering, manufacturing, quality, dealers and supplier-facing teams.
  • Able to travel and work on-site for a few days at a time at multiple plants.
  • Strong written and spoken English; clear, evidence-based technical reports for engineers and leadership.
  • Strict handling of customer-confidential data and field-returned samples.
Preferred
  • Agricultural or off-highway vehicle experience.
  • Portuguese language skills (for Brazil site work) is an added advantage.
  • Experience writing design, integration or manufacturing guidelines and torque/assembly specifications.
  • Experience coordinating external failure-analysis laboratories and sensor suppliers.
Qualification:
  • Bachelor's or Master's degree in Electrical, Electronics, Mechatronics, Instrumentation or Materials Engineering (or equivalent).
  • 10+ years in sensor development, validation, quality or failure analysis in automotive, agricultural, construction or off-highway vehicles.
  • Proven track record of leading field-failure / warranty root cause investigations to closure.