Welder

Fitter/WelderA Fitter/Welder will work either individually, or, as a part of a small team, to produce sheet metal weldments. Weldments must meet the dimensional specifications of the mechanical engineered drawings. A Fitter/Welder will be required to determine, from the drawing, where each weld is to be performed, and meet the size and length requirements of each weld specified within the given tolerance allowed. A Fitter/Welder is also required to perform any cosmetic or appearance specifications of the weldment. This may require grinding welds and sheet metal buffing.Key ResponsibilitiesAbility to MIG weld mild steelAbility to MIG weld stainless steelAbility to perform basic fittingAbility to adjust machine according to department manual(s)Ability to remove material using grinding processAbility to read drawings and inspect parts for basic dimensionsAbility to perform basic layouts (positioning and alignment)Ability to inspect parts against complex engineered drawingsAbility to spray transfer MIG weldCapability to examine weld bead for acceptable attributesAbility to identify types of copper, stainless grades, etc.Knowledge of flux core, shielded wireAbility to cope and fitRelationshipsReporting to department SupervisorInternal relationships include regular interaction with: Machine Operators, Welders, Painters, Material Handlers, Leadpersons, SupervisorsExternal relationships include regular interaction with: N/AJob RequirementsSuccessful candidate will typically have 1-2 years of relevant work experienceMust have a basic command of the English language, both written and verbalAbility to execute hot work (any work performed outside of department)Ability to finish grind, surface finishing based on departmental requirementsAbility to repair improper weldsKnowledge of fixtures required for area of responsibilityAbility to tack weldAbility to stud weldAbility to fine tune voltageAbility to square partsAbility to torch cutAbility to arc metal gougeBasic product knowledge (understanding of how work ties into the larger picture) based on departmental need/requirementKnowledge of AWS chart/steel tablesKnowledge of welding symbolsKnowledge of and ability to use basic tools (tape measure squares, clamps, fillet gage, angle finder, etc.)Ability to convert decimals to fractions and utilize conversion chartAbility to effectively communicate with co-workersAbility to effectively work in team environmentAwareness and adherence to Lock Out Tag Out proceduresAbility to follow company operating procedures, safety rules and ISO requirementsWorking EnvironmentAll work is performed in a shop environment with constant exposure to the elements of our shop. It is the policy of Powell Electrical Manufacturing Company to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. There is certain Personal Protective Equipment (PPE) to be worn during the operation of this job.