Logical Systems Inc

Mark-up Process and Instrumentation Diagrams (P&IDs) for instrumentation and controls related changes and review drawings from the drafting team. Human-Machine Interface (HMI) development and SCADA configuration. HMI/SCADA configuration experience with one or more of the following platforms:Allen Bradley / Rockwell AutomationInductive AutomationWonderwareSiemensiFixIconics. Historian and/or data analytics experience with one or more of the following platforms:OSIsoft PIPTC ThingworxInductive Automation IgnitionAspentechRockwell AutomationSiemensWonderware. Industry experience in Food and Beverage, Chemical, Pharma, Semiconductor, Water & Wastewater, Refining, Pulp and Paper, Oil/Gas Pipeline, Power Generation, Electrical Transmission & Distribution, Material Handling, or Packaging

control systems engineer

Control Systems Engineers analyze user requirements and the design of process and/or mechanical equipment to design automation systems that control the process or machine in the desired manner. The engineer uses knowledge and experience in instrumentation, control valves, Motors/VFDs, control system electrical design, and PLC/DCS programming to deliver an automation system that meets the user's needs utilizing the minimum essential design. Control Systems Engineers demonstrate: <ul><li>High integrity</li><li>A willingness to go beyond the ordinary to meet and exceed client expectations</li><li>A desire for continual challenge and development</li><li>Excellent written and verbal communication skills</li></ul> Reports To: Operations Director JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: <ul><li>Develop control specification (control narratives) documentation based on User Requirements</li><li>Participates in initial feasibility studies for proposed projects, resulting in a feasibility-level cost estimate and supporting documentation for the project</li><li>Mark-up Process and Instrumentation Diagrams (P&IDs) for instrumentation and controls related changes and review drawings from the drafting team</li><li>Design low-voltage (up to 480V) electrical controls drawings, panel drawings, loop sheets, I/O drawings, and network drawings and review drawings from the drafting team</li><li>Develop programs for Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) and/or oversee the program development done by others</li><li>Human-Machine Interface (HMI) development and SCADA configuration</li><li>Historian configuration</li><li>Execute testing plans for DCS and PLC programs to effectively test all aspects of a new program or program changes</li><li>Simulate the DCS/PLC program and test the system using the testing plan</li><li>Oversee electrical controls construction at the client's site and verify that the system is being installed as designed - provide technical support to the construction effort</li><li>Perform I/O checkout on the installed control system and document the checkout results</li><li>Provide post-commissioning support to the client's operations, engineering, and maintenance personnel</li><li>Travel to the client's site as required</li></ul> Required Experience <ul><li>Degreed in Engineering (Electrical, Mechanical, Chemical, or similar), Computer Science, or similar scientific / technical field</li></ul> Ideal Experience <ul><li>3-5 years of experience in a similar engineering role</li><li>At least 3-5 years' experience with one or more of the following platforms:<ul><li>Allen Bradley PLC5, SLC500, MicroLogix, ControlLogix</li><li>Siemens S7, PCS7</li><li>Emerson DeltaV, Ovation, Provox</li><li>Novatech D/3</li><li>Honeywell Experion</li><li>Foxboro I/A</li></ul></li><li>HMI/SCADA configuration experience with one or more of the following platforms:<ul><li>Allen Bradley / Rockwell Automation</li><li>Inductive Automation</li><li>Wonderware</li><li>Siemens</li><li>iFix</li><li>Iconics</li></ul></li><li>Historian and/or data analytics experience with one or more of the following platforms:<ul><li>OSIsoft PI</li><li>PTC Thingworx</li><li>Inductive Automation Ignition</li><li>Aspentech</li><li>Rockwell Automation</li><li>Siemens</li><li>Wonderware</li></ul></li><li>Experience in the application of instrumentation, control valves, motors, VFDs and coordinated drive systems</li><li>Current working knowledge of the National Electric Code (NEC) with the ability to locate solutions to code questions</li><li>Certified professional engineer</li><li>Some experience in electrical design of Electrical Panels, I/O systems, Motor/VFD/Motion/Robotic Controls, and Ethernet-based networks</li><li>Field experience troubleshooting electrical controls problems in an industrial environment</li><li>Industry experience in Food and Beverage, Chemical, Pharma, Semiconductor, Water & Wastewater, Refining, Pulp and Paper, Oil/Gas Pipeline, Power Generation, Electrical Transmission & Distribution, Material Handling, or Packaging</li></ul>

START NEW SEARCH