- UpvoteDownvoteShare Job
- Suggest Revision
Field instrumentation for process measurement (e.g. Pressure, Temperature, Level, and Flow) as well as specialty measurements (density, vibration) and control valves, shutdown valves, and their transmission systems (e.g. 4-20mA, HART.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Designing, reviewing, and modifying regulatory and advanced regulatory control loops and regulatory loop tuning, alarm and point configuration and console operator HMI graphics. Providing project support on capital projects with significant automation scope and supporting MOC and/or project manager with process control modifications.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Advanced Process Controls Engineer provides advanced process control support to refinery operations and projects and promotes process control strategies from basic regulatory control to multivariable control to multi-unit optimization.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
In this role, you will perform executive-level duties in inventory control, financial management, physical distribution systems, petroleum management, personnel transportation, and other related areas.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Acting as a process control subject matter expert for process hazards analysis, process design modifications, risk assessment review, alarm management, and incident investigations. The Automation Control Engineer's secondary responsibilities include support to the alarm management program, advanced operator interface graphics (HMI) development, general troubleshooting of operating conditions, and to provide training to Console Operators regarding control strategies, alarm management and HMI (Human Machine Interface.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Monitors multiple drive-in cost control procedures for food, labor, paper and inventory. Oversee multiple drive-in employees and management in performing all duties in the Basic Stations (Fountain & Frozen, Dresser, Front Swamp, Back Swamp, Grill, Switchboard, Expeditor, Food Prep, Carhop, Skating Carhop and if applicable Drive-Thru) as needed and depending on store volume, during a shift to ensure the preparation (portion control), temperature, packaging, appearance, presentation, taste and service of all menu items meet operational standards.
ExpandApply NowActive JobUpdated 2 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Performs group block management, including the entering of room lists, inventory control, coordination of casino reservations, checking resort room arrivals, and maintaining a professional relationship with all departments associated with the resort.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Maintaining awareness of chemical injection, water wash, and corrosion control programs already in place within the refinery. Accountable for corrosion and materials engineering upkeep of unit Corrosion Control Documents (CCDs), CCD training, and inputs for site Risk Based Inspection (RBI) process, as well as working with our Inspectors and Reliability Engineers.
ExpandApply NowActive JobUpdated 2 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Use ATMS iNet software to control and monitor field devices such as Closed-Circuit Television (CCTV) cameras, Digital Message Signs (DMSs), ramp meters, emergency crossover gates, and any other technology related to devices that may form part of an Intelligent Transportation System (ITS.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
General Description: The Tool Room Attendant is responsible for inventory and control of tools located in Tool Room. This person must be organized and can communicate effectively with other team members, the flexibility to respond to a variety of requests and situations, evaluate and communicate information between numerous team leaders and locations, and prioritize and accomplish tasks with little, or no direct supervision.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The service technician diagnoses and repairs customer and dealer owned agricultural and turf equipment, maintains current knowledge of John Deere and competitive products, maintains condition of inventory, tools, and equipment, and maintains a clean work area and performs work in a neat and orderly fashion.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Use your understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
We are leaders in each of our respective service lines, including Vapor Control, Chemical Cleaning, Tank Cleaning, Water Treatment, Vacuum Services, Hydroblasting, Hydroexcavation, and Industrial Logistics & Transportation.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.) If so, our Defense Systems sector wants you to join our team as a Electronics Maintenance Technicians and support a maintenance program with Company in Lake Charles, LA. The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. Border, and in source and transit zone countries.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Produce installation details, motor control center single lines, electric room layouts, motor control elementaries, connection diagrams, cable schedules, control panel layouts and grounding, lighting, power and instrumentation plans under general supervision.
ExpandApply NowActive JobUpdated Today
inventory control jobs Company: Snapchat in Lake Charles, LA
FEATURED BLOG POSTS
5 Common Interview Mistakes
Everyone's interview process is unique in some form or fashion. Like most, your interview process is crafted so you can get the most information out of your candidates to increase hiring confidence and make the right hiring decisions. However, there are often small problems in interview processes that could ultimately affect the success of hiring decisions.
How to Write a Job Description?
It might be tempting to overlook the importance of a well-written job description. After all, if you’ve posted job ads before and ended up with tons of resumes in hand, it’s easy to assume that this will always be the case, regardless of how your job ad reads. But, in reality, you really can’t take getting an influx of resumes for granted.
How to Get a W2 From Previous Employers
When tax time rolls around, the last thing you want to worry about is having to track down a W-2 from your former employer. Many times you won’t have to because the IRS requires companies to send these forms to all current and former employees who have earned more than $600 in the last year. Unfortunately, there are employers who don’t do what they’re supposed to. There are even times where something else may happen that prevents the W-2 from getting where it’s supposed to go.
How to Ask Someone to be a Reference + Email Templates
One part of the job-hunting process that frequently gets overlooked is putting together a list of good references. Most of the time we focus on creating the perfect resume, writing an awesome cover letter, and getting our hands on letters of recommendation. We think about what outfit we’ll wear to the job interview, how we’ll answer those tricky questions, and what our career plan looks like. But, in fact, having multiple references lined up who will speak favorably about you to a potential employer is critical to landing a job. This aspect of job searching really can’t be ignored.
Job Rejection Email Response with Examples
Glassdoor estimates that, on average, there are about 250 applicants for every job vacancy out there. If you’ve ever applied for a job, the odds are that you’ve received the dreaded job rejection email.
6 Best Ways to End a Cover Letter with Examples
Including a cover letter with your resume is a great way to introduce yourself to the hiring manager, tell them why you’re the ideal fit for the role, and provide context about your personal situation. A strong cover letter will give you an advantage over other applicants. But it’s important that you structure it properly and write it powerfully so that it carries an impact. This article will discuss how to end a cover letter effectively so you catch the eye of a hiring manager and increase your odds of landing an interview. Read on to learn more.
How to Write a Follow-Up Email for a Job Application?
Most times, we have to do more than submit a "sugar-coated" resume to land our dream jobs. Going the extra mile to follow up on your job application can increase your chances of employment. Additionally, it may even help you get confirmation sooner on whether you are seriously being considered for the job or not.