{"schemaVersion":"jobsearcher.job.v1","id":"fd50312d3aa41fbf6fceefdd","url":"https://jobsearcher.com/jobs/fd50312d3aa41fbf6fceefdd","canonicalUrl":"https://jobsearcher.com/jobs/fd50312d3aa41fbf6fceefdd","title":"Senior Embedded Software Engineer (Small UAV Flight Controls)","description":"Role OverviewWe are seeking a Senior Embedded Software Engineer for Small UAV Flight Controls toarchitect, develop, and test deterministic, safety-critical flight control firmware for oursmall unmanned aerial vehicles (Group 1 and Group 2 tactical aircraft, fixed-wing, or hybridVTOLs). In this role, you will own the software layer that sits directly between complexguidance algorithms and physical aircraft actuation, ensuring maximum stability, agility,and responsiveness on lightweight, space-constrained hardware.You will bridge the gap between control theory and low-SWaP (Size, Weight, and Power)bare-metal or RTOS execution. You will write robust, high-integrity code that operatesunder strict real-time constraints, optimizing every clock cycle to ensure ultra-low latencyfrom sensor sample to actuator command.Key ResponsibilitiesFlight Software & Driver Development• Control Loop Execution: Design, optimize, and implement high-rate stabilizationloops, attitude control algorithms, and actuator mixing logic in C and C++.• Low-Level Drivers: Develop and maintain bare-metal peripheral drivers for highlyintegrated microcontrollers to interface with IMUs, magnetometers, barometers,airspeed sensors, and GPS modules.• RTOS Optimization: Configure and profile Real-Time Operating Systems (e.g.,FreeRTOS, ChibiOS, Zephyr) for highly predictable task scheduling, deterministicexecution, and minimal jitter.System Integration & Deterministic Communication• Bus Architecture: Manage and optimize communication protocols over lightweight,low-pin-count buses including CAN bus (UAVCAN/Cyphal), SPI, I2C, and UART tointerface with Electronic Speed Controllers (ESCs) and servos.• Fault Tolerance: Implement robust fault detection, isolation, and recovery (FDIR)mechanisms to immediately handle small UAV anomalies, such as sensordropouts, frame vibrations, or battery voltage drops.• HIL Testing: Build and utilize Hardware-in-the-Loop (HIL) simulation setups tosafely validate flight software performance and corner-case failure modes on thebench.SWaP Optimization & Architecture• Resource Management: Target, profile, and optimize memory footprint(SRAM/Flash) and CPU usage on high-performance microcontrollers (e.g., ARMCortex-M4/M7/H7).• Open-Source Hardening: (If applicable) Maintain, customize, and secure opensource small UAV ecosystems like PX4, ArduPilot, or Betaflight for customproprietary hardware configurations.Required Skills & Qualifications• Education: Bachelor’s or Master’s degree in Computer Engineering, ElectricalEngineering, Robotics, or a related technical discipline.• Firmware Expertise: Deep professional experience developing production-gradeembedded C and C++ software for real-time systems.• Microcontroller Fluency: Extensive experience with ARM Cortex-M or similararchitectures, registers, timers, DMA, and interrupt handling.• Lab Tool Proficiency: Hands-on experience using oscilloscopes, logic analyzers,multi-meters, and JTAG/SWD debuggers to isolate hardware vs. software issues.• State Estimation Basics: Practical understanding of digital filtering (e.g., notchfilters, low-pass filters) used to mitigate high-frequency frame vibrations common insmall UAVs.Preferred Qualifications• Direct experience contributing to or deploying customized PX4 Autopilot orArduPilot stacks onto custom small UAV airframes.• Background in mathematical modeling, MATLAB/Simulink code generation, orworking alongside GNC engineers to port control laws into C.• Experience implementing lightweight safety protocols or functional safetyframeworks scaled down for consumer, commercial, or defense-grade small UAVsystemsAbout KnightwerxKnightwerx develops American-made, AI-powered unmanned aerial systems and remote sensing technologies for commercial and government customers. Our platforms support autonomous operations, human-machine teaming, and mission-critical applications where reliability, performance, and speed matter.","company":"Knightwerx","rawCompany":"knightwerx","city":"Phoenix","state":"AZ","isRemote":false,"isActive":true,"createdAt":"2026-10-06T06:00:11.676Z","occupations":[{"code":"15-1252.00","title":"Software Developers","slug":"software-developers"},{"code":"17-2072.00","title":"Electronics Engineers, Except Computer","slug":"electronics-engineers-except-computer"},{"code":"15-1299.08","title":"Computer Systems Engineers/Architects","slug":"computer-systems-engineers-architects"}],"industries":[{"code":"336411","title":"Aircraft Manufacturing","slug":"aircraft-manufacturing"},{"code":"334511","title":"Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing","slug":"search-detection-navigation-guidance-aeronautical-and-nautical-system-and-instrument-manufacturing"},{"code":"541511","title":"Custom Computer Programming Services","slug":"custom-computer-programming-services"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Senior Embedded Software Engineer (Small UAV Flight Controls)","description":"Role OverviewWe are seeking a Senior Embedded Software Engineer for Small UAV Flight Controls toarchitect, develop, and test deterministic, safety-critical flight control firmware for oursmall unmanned aerial vehicles (Group 1 and Group 2 tactical aircraft, fixed-wing, or hybridVTOLs). In this role, you will own the software layer that sits directly between complexguidance algorithms and physical aircraft actuation, ensuring maximum stability, agility,and responsiveness on lightweight, space-constrained hardware.You will bridge the gap between control theory and low-SWaP (Size, Weight, and Power)bare-metal or RTOS execution. You will write robust, high-integrity code that operatesunder strict real-time constraints, optimizing every clock cycle to ensure ultra-low latencyfrom sensor sample to actuator command.Key ResponsibilitiesFlight Software & Driver Development• Control Loop Execution: Design, optimize, and implement high-rate stabilizationloops, attitude control algorithms, and actuator mixing logic in C and C++.• Low-Level Drivers: Develop and maintain bare-metal peripheral drivers for highlyintegrated microcontrollers to interface with IMUs, magnetometers, barometers,airspeed sensors, and GPS modules.• RTOS Optimization: Configure and profile Real-Time Operating Systems (e.g.,FreeRTOS, ChibiOS, Zephyr) for highly predictable task scheduling, deterministicexecution, and minimal jitter.System Integration & Deterministic Communication• Bus Architecture: Manage and optimize communication protocols over lightweight,low-pin-count buses including CAN bus (UAVCAN/Cyphal), SPI, I2C, and UART tointerface with Electronic Speed Controllers (ESCs) and servos.• Fault Tolerance: Implement robust fault detection, isolation, and recovery (FDIR)mechanisms to immediately handle small UAV anomalies, such as sensordropouts, frame vibrations, or battery voltage drops.• HIL Testing: Build and utilize Hardware-in-the-Loop (HIL) simulation setups tosafely validate flight software performance and corner-case failure modes on thebench.SWaP Optimization & Architecture• Resource Management: Target, profile, and optimize memory footprint(SRAM/Flash) and CPU usage on high-performance microcontrollers (e.g., ARMCortex-M4/M7/H7).• Open-Source Hardening: (If applicable) Maintain, customize, and secure opensource small UAV ecosystems like PX4, ArduPilot, or Betaflight for customproprietary hardware configurations.Required Skills & Qualifications• Education: Bachelor’s or Master’s degree in Computer Engineering, ElectricalEngineering, Robotics, or a related technical discipline.• Firmware Expertise: Deep professional experience developing production-gradeembedded C and C++ software for real-time systems.• Microcontroller Fluency: Extensive experience with ARM Cortex-M or similararchitectures, registers, timers, DMA, and interrupt handling.• Lab Tool Proficiency: Hands-on experience using oscilloscopes, logic analyzers,multi-meters, and JTAG/SWD debuggers to isolate hardware vs. software issues.• State Estimation Basics: Practical understanding of digital filtering (e.g., notchfilters, low-pass filters) used to mitigate high-frequency frame vibrations common insmall UAVs.Preferred Qualifications• Direct experience contributing to or deploying customized PX4 Autopilot orArduPilot stacks onto custom small UAV airframes.• Background in mathematical modeling, MATLAB/Simulink code generation, orworking alongside GNC engineers to port control laws into C.• Experience implementing lightweight safety protocols or functional safetyframeworks scaled down for consumer, commercial, or defense-grade small UAVsystemsAbout KnightwerxKnightwerx develops American-made, AI-powered unmanned aerial systems and remote sensing technologies for commercial and government customers. Our platforms support autonomous operations, human-machine teaming, and mission-critical applications where reliability, performance, and speed matter.","datePosted":"2026-10-06T06:00:11.676Z","dateModified":"2026-10-06T06:00:11.676Z","hiringOrganization":{"@type":"Organization","name":"Knightwerx","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Phoenix","addressRegion":"AZ","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"fd50312d3aa41fbf6fceefdd"},"url":"https://jobsearcher.com/jobs/fd50312d3aa41fbf6fceefdd"}}