{"schemaVersion":"jobsearcher.job.v1","id":"d9a36edeb687c03df4a88fe6","url":"https://jobsearcher.com/jobs/d9a36edeb687c03df4a88fe6","canonicalUrl":"https://jobsearcher.com/jobs/d9a36edeb687c03df4a88fe6","title":"Quality Engineer","description":"GERMFREE | Quality Engineering — Job Description\n\nJob Title: Quality Engineer · Department: Quality Engineering · Location: Ormond Beach, FL (USA) · Classification: Full-Time, Exempt\n\nReports To\n\nDirector of Quality & Lean (direct report)\n\nFLSA Status\n\nExempt\n\nTravel\n\nUp to 15% (domestic; occasional international) for supplier audits, customer site visits, and FAT/SAT activities\n\nIndustry\n\nAdvanced Manufacturing — cGMP Cleanrooms, Biocontainment Labs, Pharmaceutical Isolators, Biosafety Cabinets, Modular & Mobile Controlled Environments\n\nPosition Summary\nThe Quality Engineer is a hands-on technical contributor who executes, maintains, and continuously improves quality across Germfree's advanced manufacturing operations. Germfree engineers manufacture mission-critical controlled environments; modular and mobile cGMP cleanrooms, biosafety level (BSL-2 through BSL-4) biocontainment laboratories, pharmaceutical isolators, biosafety cabinets, laminar-flow workstations, and compounding-pharmacy solutions for biopharmaceutical, healthcare, and biocontainment customers worldwide.\nReporting directly to the Director of Quality & Lean, this individual-contributor role applies engineering rigor across the full product lifecycle: supplier and incoming quality, process and in-process control, new product introduction (NPI/APQP), nonconformance and root-cause investigation, and Factory/Site Acceptance Testing (FAT/SAT). The Quality Engineer partners closely with Engineering, Operations, Supply Chain, and Project Management carrying the Voice of the Customer into design and build: and may guide quality technicians and inspectors, though the role has no direct reports.\nAbout Germfree's certification & the experience we value\nGermfree maintains ISO 9001:2015 certification. Its products are engineered to support a range of customer and industry standards (cGMP / FDA 21 CFR Parts 210, 211, 820; ISO 14644; EU GMP Annex 1; USP /; CDC-NIH BMBL; ISPE/GAMP); these are standards the products must meet for customers, not certifications Germfree holds. We especially welcome candidates who bring experience from more heavily regulated sectors — medical device (ISO 13485, 21 CFR 820), pharmaceutical/biotech (cGMP), or aerospace (AS9100). That regulatory discipline translates directly into the quality our customers depend on.\nKey Responsibilities\n1. Quality Management System (QMS) Support & Documentation\nExecute and help maintain Germfree's ISO 9001:2015 quality management system, supporting conformance across fabrication, assembly, integration, and final acceptance.\nAuthor and revise Standard Operating Procedures (SOPs), Work Instructions (WIs), Quality Plans, and Inspection & Test Plans (ITPs), and support Document Control for version control, record retention, and traceability.\nProcess and track nonconformances (NCMRs), corrective and preventive actions (CAPAs), and disposition records, ensuring complete and audit-ready documentation.\nCompile and report quality metrics;first-pass yield, scrap/rework, escape rate, and Cost of Quality (CoQ)and surface trends with recommended actions to the Director of Quality & Lean.\n2. Industry & Customer Regulatory Standards (Applied)\nApply working knowledge of the customer and industry standards Germfree's products are designed and built tosupport— not as internal certifications, but as product and project requirements:\ncGMP / FDA 21 CFR Parts 210, 211, 820as applicable to cleanroom and equipment product lines delivered to pharma and medical customers.\nISO 14644 (Parts 1–4)cleanroom classification, monitoring, design, and operations.\nEU GMP Annex 1, USP /sterile-product and compounding-pharmacy facility requirements.\nCDC-NIH BMBL (BSL-2/3/4)biocontainment facility requirements; and ISPE Baseline Guides / GAMP 5 for commissioning and qualification documentation.\nSupport regulatory documentation for Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) that feeds downstream customer IQ/OQ/PQ validation.\n3. Process & Product Quality Engineering\nDevelop and maintain Process FMEAs (PFMEA), Control Plans, and in-process inspection plans; define Critical-to-Quality (CTQ) characteristics for mechanical fabrication, HVAC/MEP integration, electrical systems, cleanroom panel assembly, and equipment build.\nApply Statistical Process Control (SPC), capability analysis (Cpk/Ppk), and Measurement System Analysis (MSA / Gauge R&R) to stabilize and improve processes.\nEstablishand/orsupportinspection and test methods covering weld inspection (AWS D1.1/D1.6, ASME BPE for stainless steel), HEPA filter leak testing (IEST-RP-CC034), pressure-decay testing, and airflow performance verification.\nPerform First Article Inspections (FAI) for new products and after significant design or process changes; read and interpret engineering drawings, GD&T, weld symbols, and schematics.\nContribute to Design Reviews and DFMEA as the quality and Voice-of-the-Customer partner to Engineering — helping design quality and manufacturability in, while Engineering owns the design.\n4. New Product Introduction (NPI) / APQP & Launch Support\nSupportpractices/activitiessimilar toAdvanced Product Quality Planning (APQP) through phase-gate reviews, helping build Control Plans, PFMEAs, and launch-readiness deliverables for new products and major changes.\nSupport process validation and run-at-rate, first-article builds, and the containment of launch issues, capturing lessons learned for future programs.\n5. Nonconformance, Root Cause & CAPA\nDisposition nonconforming material and participate in the Material Review Board (MRB); accurately document dispositions and drive timely closure.\nLead root-cause investigations using 8D, 5-Why, Ishikawa/fishbone, and fault-tree analysis, and drive effective, verified CAPA closure.\nSupport Supplier Corrective Action Requests (SCARs) where suppliers are the root cause, partnering with Supplier Quality to recover and preventcosts.\n6. Supplier Quality & Incoming Inspection Support\nHelp define incoming inspection criteria and sampling plans (ANSI/ASQ Z1.4 and Z1.9) for critical materials — cleanroom panels, HEPA/ULPA filters, stainless fabrications, HVAC components, electrical components, and process equipment.\nSupport supplier qualification, on-site process audits, and performance scorecards; provide technical support to the receiving-inspection function and partner with the Incoming Inspector to clear holds.\nConduct trend and root-cause analysis on supplier-driven defects and feed results into supplier corrective action.\n7. Lean Manufacturing & Continuous Improvement\nParticipate in and facilitate Kaizen events and rapid-improvement workshops targeting defect reduction, cycle-time compression, and flow.\nSupport Value Stream Mapping (VSM), 5S, visual management, and standard work across fabrication and assembly areas.\nApply Six Sigma DMAIC and poka-yoke (mistake-proofing) to reduce process variation, scrap, rework, and warranty cost in high-impact areas (panel fit-up, seal integrity, duct fabrication, stainless finishing).\n8. Audit Support & Customer-Facing Quality\nSupport the internal audit program and prepare evidence for ISO 9001 surveillance, customer, and notified-body audits; act as a quality contact during customer audits and inspections as assigned.\nCompile quality dossiers, material certifications, weld traceability records, filter certifications, and test-data packages for project closeout and customer commissioning & qualification (CQV).\nInvestigate customer complaints and quality escapes with documented containment, correction, and prevention within defined response timelines.\n9. Collaboration, Voice of the Customer & Quality Culture\nPartner cross-functionally with Engineering, Operations, Supply Chain, and Project Management to resolve day-to-day design, production, and customer quality issues at the source.\nModel a quality-first culture through visible engagement andGembapresence; support training on GMP awareness, contamination prevention, ESD controls, nonconformance reporting, and documentation practices.\nGuide and mentor quality technicians and inspectors by example, supporting their development (no direct reports).\nQualifications\nEducation\nBachelor’s degree in mechanical, Manufacturing, Industrial, Biomedical, Chemical Engineering, or a closely related technical discipline (or equivalent experience).\nExperience\n3–6 years of quality engineering experience in a manufacturing environment; experience with custom-fabricated and integrated systems (structural, mechanical, HVAC, electrical) is strongly preferred.\nExperience in regulated, life-science, or precision-manufacturing sectors is highly valued.Germfree is ISO 9001:2015 certified; candidates who bring rigor from medical device (ISO 13485, 21 CFR 820), pharmaceutical/biotech (cGMP), or aerospace (AS9100) environments are especially encouraged to apply.\nHands-on experience across the product lifecycle from supplier and incoming quality through in-process control and customer acceptance (FAT/SAT).\nTechnical Knowledge\nWorking knowledge of ISO 9001:2015 QMS requirements; familiarity with ISO 13485 and FDA 21 CFR 210/211/820 is a strong plus.\nProficiency with core quality tools: FMEA (DFMEA/PFMEA), Control Plans, SPC, MSA/Gauge R&R, APQP, PPAP, 8D, and CAPA.\nLean Six Sigma experience (VSM, 5S, Kaizen, DMAIC, poka-yoke); Green Belt preferred.\nAbility to read and interpret engineering drawings, GD&T, weld symbols, and schematics; familiarity with ISO 14644 cleanroom classification.\nFamiliarity with weld inspection standards (AWS, ASME BPE), HEPA filter test standards (IEST-RP-CC034), and cleanroom qualification protocols is a plus.\nPreferred Qualifications & Certifications\nASQ Certified Quality Engineer (CQE); Certified Quality Auditor (CQA) or Certified Supplier Quality Professional (CSQP) a plus.\nLean Six Sigma Green Belt or Black Belt (LSSGB / LSSBB).\nExperience in medical device (ISO 13485), pharmaceutical/biotech (cGMP), or aerospace (AS9100) regulated manufacturing.\nExposure to modular, prefabricated, or off-site construction quality programs, and to CDC-NIH BMBL (BSL-2/3/4) containment requirements.\nCore Competencies\nThe following competencies define the behaviors and capabilities critical for success in this role:\nCompetency\n\nDescription\n\nTechnical Depth\n\nHands-on fluency with the materials, processes, and systems in cleanroom and controlled-environment manufacturing — fabrication, weldments, sheet metal, HVAC/MEP integration, electrical, and HEPA/filtration.\n\nProblem-Solving & Root Cause\n\nDisciplined use of 8D, 5-Why, Ishikawa, and fault-tree analysis to find true root cause and drive corrective and preventive action to verify closure.\n\nData-Driven Decision Making\n\nApply SPC, capability analysis (Cpk/Ppk), MSA, and quality metrics to diagnose issues and prioritize improvements objectively.\n\nQuality-Systems Rigor\n\nMaintains documentation, records, and traceability to ISO 9001:2015 discipline; understands how heavier-regulated frameworks (ISO 13485, 21 CFR 820, cGMP) raise the bar.\n\nVoice of the Customer\n\nCarries the customer's requirements into design reviews, FMEAs, and control plans; partners with Engineering so quality and manufacturability are built in, not inspected in.\n\nContinuous-Improvement Mindset\n\nChampions lean and defect-prevention; actively reduces scrap, rework, and Cost of Quality through Kaizen, poka-yoke, and standard work.\n\nCross-Functional Collaboration\n\nCommunicates and builds trust across Engineering, Operations, Supply Chain, and Project Management to resolve quality issues at the source.\n\nAccountability & Ownership\n\nHolds self to high standards, follows through on commitments, escalates risk early, and can guide technicians and inspectors by example.\n\nWorking Conditions & Physical Requirements\nSplit between office and the production floor — fabrication, assembly, and cleanroom areas; observation, collaboration, and inspection are part of the daily rhythm.\nOccasional work in confined or elevated areas during facility inspections; capable of standing for extended periods andlifting upto 25 lbs.\nTravel up to 15% may be required for supplier audits, customer site visits, and FAT/SAT activities.\nMust navigate manufacturing environments safely in compliance with all OSHA and Germfree safety protocols.\n\nWe are proud to be an Equal Opportunity Employer committed to fostering a diverse and inclusive workplace. We value and celebrate the unique backgrounds, perspectives, and experiences of all individuals, and we believe that diversity drives innovation and growth. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status.\nWe also maintain a drug-free workplace. Offers of employment may be contingent upon the successful completion of a drug screening, in accordance with applicable laws and company policies.","company":"Germfree Laboratories","rawCompany":"germfree laboratories","city":"Ormond Beach","state":"FL","isRemote":false,"isActive":false,"createdAt":"2026-08-01T06:59:24.958Z","occupations":[{"code":"17-2112.02","title":"Validation Engineers","slug":"validation-engineers"},{"code":"11-3051.01","title":"Quality Control Systems Managers","slug":"quality-control-systems-managers"},{"code":"19-4099.01","title":"Quality Control Analysts","slug":"quality-control-analysts"}],"industries":[{"code":"339113","title":"Surgical Appliance and Supplies Manufacturing","slug":"surgical-appliance-and-supplies-manufacturing"},{"code":"339112","title":"Surgical and Medical Instrument Manufacturing","slug":"surgical-and-medical-instrument-manufacturing"},{"code":"325412","title":"Pharmaceutical Preparation Manufacturing","slug":"pharmaceutical-preparation-manufacturing"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Quality Engineer","description":"GERMFREE | Quality Engineering — Job Description\n\nJob Title: Quality Engineer · Department: Quality Engineering · Location: Ormond Beach, FL (USA) · Classification: Full-Time, Exempt\n\nReports To\n\nDirector of Quality & Lean (direct report)\n\nFLSA Status\n\nExempt\n\nTravel\n\nUp to 15% (domestic; occasional international) for supplier audits, customer site visits, and FAT/SAT activities\n\nIndustry\n\nAdvanced Manufacturing — cGMP Cleanrooms, Biocontainment Labs, Pharmaceutical Isolators, Biosafety Cabinets, Modular & Mobile Controlled Environments\n\nPosition Summary\nThe Quality Engineer is a hands-on technical contributor who executes, maintains, and continuously improves quality across Germfree's advanced manufacturing operations. Germfree engineers manufacture mission-critical controlled environments; modular and mobile cGMP cleanrooms, biosafety level (BSL-2 through BSL-4) biocontainment laboratories, pharmaceutical isolators, biosafety cabinets, laminar-flow workstations, and compounding-pharmacy solutions for biopharmaceutical, healthcare, and biocontainment customers worldwide.\nReporting directly to the Director of Quality & Lean, this individual-contributor role applies engineering rigor across the full product lifecycle: supplier and incoming quality, process and in-process control, new product introduction (NPI/APQP), nonconformance and root-cause investigation, and Factory/Site Acceptance Testing (FAT/SAT). The Quality Engineer partners closely with Engineering, Operations, Supply Chain, and Project Management carrying the Voice of the Customer into design and build: and may guide quality technicians and inspectors, though the role has no direct reports.\nAbout Germfree's certification & the experience we value\nGermfree maintains ISO 9001:2015 certification. Its products are engineered to support a range of customer and industry standards (cGMP / FDA 21 CFR Parts 210, 211, 820; ISO 14644; EU GMP Annex 1; USP /; CDC-NIH BMBL; ISPE/GAMP); these are standards the products must meet for customers, not certifications Germfree holds. We especially welcome candidates who bring experience from more heavily regulated sectors — medical device (ISO 13485, 21 CFR 820), pharmaceutical/biotech (cGMP), or aerospace (AS9100). That regulatory discipline translates directly into the quality our customers depend on.\nKey Responsibilities\n1. Quality Management System (QMS) Support & Documentation\nExecute and help maintain Germfree's ISO 9001:2015 quality management system, supporting conformance across fabrication, assembly, integration, and final acceptance.\nAuthor and revise Standard Operating Procedures (SOPs), Work Instructions (WIs), Quality Plans, and Inspection & Test Plans (ITPs), and support Document Control for version control, record retention, and traceability.\nProcess and track nonconformances (NCMRs), corrective and preventive actions (CAPAs), and disposition records, ensuring complete and audit-ready documentation.\nCompile and report quality metrics;first-pass yield, scrap/rework, escape rate, and Cost of Quality (CoQ)and surface trends with recommended actions to the Director of Quality & Lean.\n2. Industry & Customer Regulatory Standards (Applied)\nApply working knowledge of the customer and industry standards Germfree's products are designed and built tosupport— not as internal certifications, but as product and project requirements:\ncGMP / FDA 21 CFR Parts 210, 211, 820as applicable to cleanroom and equipment product lines delivered to pharma and medical customers.\nISO 14644 (Parts 1–4)cleanroom classification, monitoring, design, and operations.\nEU GMP Annex 1, USP /sterile-product and compounding-pharmacy facility requirements.\nCDC-NIH BMBL (BSL-2/3/4)biocontainment facility requirements; and ISPE Baseline Guides / GAMP 5 for commissioning and qualification documentation.\nSupport regulatory documentation for Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) that feeds downstream customer IQ/OQ/PQ validation.\n3. Process & Product Quality Engineering\nDevelop and maintain Process FMEAs (PFMEA), Control Plans, and in-process inspection plans; define Critical-to-Quality (CTQ) characteristics for mechanical fabrication, HVAC/MEP integration, electrical systems, cleanroom panel assembly, and equipment build.\nApply Statistical Process Control (SPC), capability analysis (Cpk/Ppk), and Measurement System Analysis (MSA / Gauge R&R) to stabilize and improve processes.\nEstablishand/orsupportinspection and test methods covering weld inspection (AWS D1.1/D1.6, ASME BPE for stainless steel), HEPA filter leak testing (IEST-RP-CC034), pressure-decay testing, and airflow performance verification.\nPerform First Article Inspections (FAI) for new products and after significant design or process changes; read and interpret engineering drawings, GD&T, weld symbols, and schematics.\nContribute to Design Reviews and DFMEA as the quality and Voice-of-the-Customer partner to Engineering — helping design quality and manufacturability in, while Engineering owns the design.\n4. New Product Introduction (NPI) / APQP & Launch Support\nSupportpractices/activitiessimilar toAdvanced Product Quality Planning (APQP) through phase-gate reviews, helping build Control Plans, PFMEAs, and launch-readiness deliverables for new products and major changes.\nSupport process validation and run-at-rate, first-article builds, and the containment of launch issues, capturing lessons learned for future programs.\n5. Nonconformance, Root Cause & CAPA\nDisposition nonconforming material and participate in the Material Review Board (MRB); accurately document dispositions and drive timely closure.\nLead root-cause investigations using 8D, 5-Why, Ishikawa/fishbone, and fault-tree analysis, and drive effective, verified CAPA closure.\nSupport Supplier Corrective Action Requests (SCARs) where suppliers are the root cause, partnering with Supplier Quality to recover and preventcosts.\n6. Supplier Quality & Incoming Inspection Support\nHelp define incoming inspection criteria and sampling plans (ANSI/ASQ Z1.4 and Z1.9) for critical materials — cleanroom panels, HEPA/ULPA filters, stainless fabrications, HVAC components, electrical components, and process equipment.\nSupport supplier qualification, on-site process audits, and performance scorecards; provide technical support to the receiving-inspection function and partner with the Incoming Inspector to clear holds.\nConduct trend and root-cause analysis on supplier-driven defects and feed results into supplier corrective action.\n7. Lean Manufacturing & Continuous Improvement\nParticipate in and facilitate Kaizen events and rapid-improvement workshops targeting defect reduction, cycle-time compression, and flow.\nSupport Value Stream Mapping (VSM), 5S, visual management, and standard work across fabrication and assembly areas.\nApply Six Sigma DMAIC and poka-yoke (mistake-proofing) to reduce process variation, scrap, rework, and warranty cost in high-impact areas (panel fit-up, seal integrity, duct fabrication, stainless finishing).\n8. Audit Support & Customer-Facing Quality\nSupport the internal audit program and prepare evidence for ISO 9001 surveillance, customer, and notified-body audits; act as a quality contact during customer audits and inspections as assigned.\nCompile quality dossiers, material certifications, weld traceability records, filter certifications, and test-data packages for project closeout and customer commissioning & qualification (CQV).\nInvestigate customer complaints and quality escapes with documented containment, correction, and prevention within defined response timelines.\n9. Collaboration, Voice of the Customer & Quality Culture\nPartner cross-functionally with Engineering, Operations, Supply Chain, and Project Management to resolve day-to-day design, production, and customer quality issues at the source.\nModel a quality-first culture through visible engagement andGembapresence; support training on GMP awareness, contamination prevention, ESD controls, nonconformance reporting, and documentation practices.\nGuide and mentor quality technicians and inspectors by example, supporting their development (no direct reports).\nQualifications\nEducation\nBachelor’s degree in mechanical, Manufacturing, Industrial, Biomedical, Chemical Engineering, or a closely related technical discipline (or equivalent experience).\nExperience\n3–6 years of quality engineering experience in a manufacturing environment; experience with custom-fabricated and integrated systems (structural, mechanical, HVAC, electrical) is strongly preferred.\nExperience in regulated, life-science, or precision-manufacturing sectors is highly valued.Germfree is ISO 9001:2015 certified; candidates who bring rigor from medical device (ISO 13485, 21 CFR 820), pharmaceutical/biotech (cGMP), or aerospace (AS9100) environments are especially encouraged to apply.\nHands-on experience across the product lifecycle from supplier and incoming quality through in-process control and customer acceptance (FAT/SAT).\nTechnical Knowledge\nWorking knowledge of ISO 9001:2015 QMS requirements; familiarity with ISO 13485 and FDA 21 CFR 210/211/820 is a strong plus.\nProficiency with core quality tools: FMEA (DFMEA/PFMEA), Control Plans, SPC, MSA/Gauge R&R, APQP, PPAP, 8D, and CAPA.\nLean Six Sigma experience (VSM, 5S, Kaizen, DMAIC, poka-yoke); Green Belt preferred.\nAbility to read and interpret engineering drawings, GD&T, weld symbols, and schematics; familiarity with ISO 14644 cleanroom classification.\nFamiliarity with weld inspection standards (AWS, ASME BPE), HEPA filter test standards (IEST-RP-CC034), and cleanroom qualification protocols is a plus.\nPreferred Qualifications & Certifications\nASQ Certified Quality Engineer (CQE); Certified Quality Auditor (CQA) or Certified Supplier Quality Professional (CSQP) a plus.\nLean Six Sigma Green Belt or Black Belt (LSSGB / LSSBB).\nExperience in medical device (ISO 13485), pharmaceutical/biotech (cGMP), or aerospace (AS9100) regulated manufacturing.\nExposure to modular, prefabricated, or off-site construction quality programs, and to CDC-NIH BMBL (BSL-2/3/4) containment requirements.\nCore Competencies\nThe following competencies define the behaviors and capabilities critical for success in this role:\nCompetency\n\nDescription\n\nTechnical Depth\n\nHands-on fluency with the materials, processes, and systems in cleanroom and controlled-environment manufacturing — fabrication, weldments, sheet metal, HVAC/MEP integration, electrical, and HEPA/filtration.\n\nProblem-Solving & Root Cause\n\nDisciplined use of 8D, 5-Why, Ishikawa, and fault-tree analysis to find true root cause and drive corrective and preventive action to verify closure.\n\nData-Driven Decision Making\n\nApply SPC, capability analysis (Cpk/Ppk), MSA, and quality metrics to diagnose issues and prioritize improvements objectively.\n\nQuality-Systems Rigor\n\nMaintains documentation, records, and traceability to ISO 9001:2015 discipline; understands how heavier-regulated frameworks (ISO 13485, 21 CFR 820, cGMP) raise the bar.\n\nVoice of the Customer\n\nCarries the customer's requirements into design reviews, FMEAs, and control plans; partners with Engineering so quality and manufacturability are built in, not inspected in.\n\nContinuous-Improvement Mindset\n\nChampions lean and defect-prevention; actively reduces scrap, rework, and Cost of Quality through Kaizen, poka-yoke, and standard work.\n\nCross-Functional Collaboration\n\nCommunicates and builds trust across Engineering, Operations, Supply Chain, and Project Management to resolve quality issues at the source.\n\nAccountability & Ownership\n\nHolds self to high standards, follows through on commitments, escalates risk early, and can guide technicians and inspectors by example.\n\nWorking Conditions & Physical Requirements\nSplit between office and the production floor — fabrication, assembly, and cleanroom areas; observation, collaboration, and inspection are part of the daily rhythm.\nOccasional work in confined or elevated areas during facility inspections; capable of standing for extended periods andlifting upto 25 lbs.\nTravel up to 15% may be required for supplier audits, customer site visits, and FAT/SAT activities.\nMust navigate manufacturing environments safely in compliance with all OSHA and Germfree safety protocols.\n\nWe are proud to be an Equal Opportunity Employer committed to fostering a diverse and inclusive workplace. We value and celebrate the unique backgrounds, perspectives, and experiences of all individuals, and we believe that diversity drives innovation and growth. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status.\nWe also maintain a drug-free workplace. Offers of employment may be contingent upon the successful completion of a drug screening, in accordance with applicable laws and company policies.","datePosted":"2026-08-01T06:59:24.958Z","dateModified":"2026-08-01T06:59:24.958Z","hiringOrganization":{"@type":"Organization","name":"Germfree Laboratories","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Ormond Beach","addressRegion":"FL","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"d9a36edeb687c03df4a88fe6"},"url":"https://jobsearcher.com/jobs/d9a36edeb687c03df4a88fe6"}}