- UpvoteDownvoteShare Job
- Suggest Revision
Grade III, or higher, Wastewater Treatment Plant Operator Certificate issued by the California State Water Resources Control Board 2.5 years of performing the duties of a Wastewater Treatment Plant Operator.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
We are leaders in each of our respective service lines, including Vapor Control, Chemical Cleaning, Tank Cleaning, Water Treatment, Vacuum Services, Hydroblasting, Hydroexcavation, and Industrial Logistics & Transportation.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees. Primary Duties & Responsibilities:Upon first article approval, level one punch press operator will continue production.
$24 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Job Details Description As a member of the Menzies Aviation Fuel Farm Operating Team you will be responsible for sampling and testing products for quality control, and perform inspections and basic maintenance on facilities, fuel systems and fueling vehicles.
$21Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Assure maintenance of environmental control of plant facility as dictated by permits and state regulations, including the safe and orderly disposition of hazardous waste. Controls the processes through the use of statistical process control, to include: Sampling and performing tests as needed.
ExpandUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
Continually monitor and control the temperatures of dough during the mixing process and the final mixing stage of the dough. Monitor and control the efficiency of the Rheon Line to ensure that dough mixes do not exceed the capacity of the Rheon Line. Continually monitor and control ingredient inventory control.
$21.66 an hourFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Requires ability to identify parts from blueprints or Manufacturing Process Data. Requires keeping of necessary records as required by Quality Control. Summary:Requires surface treatment of a variety of metal parts by such processes as cleaning, stripping, pickling, sandblasting, de-scaling, and passivation of metal parts.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
We’re seeking a Part-Time Board Operator to provide programming and control board support to On-Air Talent. Monitor the technical quality and accuracy of incoming and outgoing on-air programming from master control room.
Part-timeExpandUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
Maintain Daily/Monthly Machine Logbook CNC machine operator records each part number, part quantity, perimeter inches, material type into his computer and separate each month for its own accountability per the Air Quality Control Requirements Inspect Finished Pieces CNC machine operator inspects finished parts to ensure they meet all specifications and quality standards.
Full-timeExpandUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
1+ years of experience working with access control, CCTV monitoring, incident management technology in an GSOC. Ensure the protection of company staff, guests, and assets through a diligent monitoring of Access Control System, CCTV, Incident Management Systems and Dispatch Control Room.
$87,000 a yearFull-timeExpandApply NowActive JobUpdated 2 days ago - UpvoteDownvoteShare Job
- Suggest Revision
Using a variety of tools that range from Salesforce (proprietary database) to GPS-tracking systems, access control, and mapping software, the GSOC Operator is primarily tasked with fulfilling the group’s database-entry and communication triage responsibilities.
TemporaryExpandApply NowActive JobUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
The CNC Lathe Operator follows written and verbal instructions, such as: description of machine’s safety tools function and control of adjustment of machine. Checks own work for conformance to specifications and keeps all SPC diameters and dimensions in control.
Full-timeExpandUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR.
$30 an hourFull-timeExpandUpdated 1 month ago - UpvoteDownvoteShare Job
- Suggest Revision
Communicates with NFL Network Master Control during live broadcasts to ensure signal continuity. The TOC operator is the first point of troubleshooting and escalation if an issue occurs and will be expected to communicate issues to Operations and Production Management in a timely and efficient manner.
Part-timeExpandApply NowActive JobUpdated 2 days ago - UpvoteDownvoteShare Job
- Suggest Revision
The Inventory Control Operator will support the day-to-day operation of the material warehouses and storage. This is the career level of the Inventory Control Operator series.
Full-timeExpandUpdated 1 month ago
control job Title: operator in Los Angeles, CA
FEATURED BLOG POSTS
How to Professionally Reschedule a Job Interview Without Destroying Your Chances
You’ve practiced answering common interview questions and refined your “greatest weakness.’ Nothing can stop you until BAM! The flu hits your household. Or you ran over a nail and popped a tire en route to the interview. When you need to pivot, there’s a good, better, and best way to reschedule a job interview. Here’s how to do it professionally, so you can nail the gig when the timing is right.
What is a W-9 and How to Fill One Out
When you began working for yourself, you probably didn’t account for the tax reporting work that will fall on your shoulders each year. If you’re a freelancer, independent contractor, or business owner, filing your taxes is not as simple as uploading your W-2 form into some online tax preparation software. Most self-employed people need to complete a W-9 as a step for accurately reporting their earnings to the IRS. Below, you can learn how to fill out a W-9 and when to submit it.
Tightening the HR budget in 2023
With the state of the economy still uncertain, 2023 is expected to be approached with much anticipation. Human Resource leaders have many concerns, including how they will manage to accomplish their goals with budget belts already getting snug. Let’s look at some of the factors that the new year is projected to bring for HR and how to prioritize budgets to reach human capital objectives.
A Comprehensive Guide to Becoming a Better Conversationalist
Have you ever stood awkwardly next to someone at a party because you didn’t know what to say to them? How about at a networking event or on a first date? You're not alone if you’ve ever experienced this uncomfortable silence. Many people struggle to master the art of being a great conversationalist.
Why is Non-Verbal Communication Really Important?
In a world where words and phrases rule daily communication, you may wonder why non-verbal communication is important. Whether you realize it or not, you communicate more with nonverbal actions than you do with verbal communication. When you interact with your peers, people are reading your body language, facial expressions, voice, and many other factors that help fill in blanks that words can't fill.
What Questions Can You Not Ask in an Interview?
It can be stressful to interview candidates to fill an open role at your company. Maybe your boss is on you to hire someone who’s absolutely perfect as soon as possible. Maybe you don’t have a ton of experience yet in conducting interviews. Whatever the case, there’s a lot to take under consideration when you’re the one in charge of interviewing. For instance, “What questions can you not ask in an interview?” may very well be running through your mind given its legal ramifications. Knowing exactly which interview questions are off-limits (and which are fine to ask) will boost your confidence as you continue to search for the ideal new hire.
How to Prepare to Be Fired - What You Need to Do
If you’re reading this, let me be the first to tell you how sorry I am. Getting fired feels crappy, disheartening, hurtful, and all the other bad, sad words. But here’s what I want you to do. First, let yourself fumble for a minute. Then, pick your head up — sometimes getting fired is a blessing in disguise. If you think termination is around the corner, we’ll teach you how to prepare to be fired and what to do next so you land somewhere even better.