{"schemaVersion":"jobsearcher.job.v1","id":"ac9b319a433c979f095f397e","url":"https://jobsearcher.com/jobs/ac9b319a433c979f095f397e","canonicalUrl":"https://jobsearcher.com/jobs/ac9b319a433c979f095f397e","title":"Process Engineer","description":"Location: Framingham, Massachusetts, United States\nEmployment Type: Full-Time\nReference Code: TSO821799MA\nDate Posted: 04/Nov/2021\nYears of Experience Req.: 0 Years\n\nSummary\nThis is an individual contributor/support position that will act as a part of a larger DPS embedded client-based team providing Process Manufacturing and Engineering design support. The Process Engineer will contribute to the creation of design and technical documents to support our DPS client scope and objectives. Common work products will include generation of PFDs, P&IDs, Process Lists, Equipment Specifications and Commissioning start up protocols for new process equipment. In this position, the Process Engineer will work closely with vendors to ensure technical deliverables are achieved for the scope of the assigned project. The Process Engineer must have a strong desire to learn new technical platforms and process technologies as they apply to the relevant life sciences Clients that DPS support.\n\nKey Responsibilities\nDevelop, Review Approve technical content of P&IDs, and complete back-check process ensuring drawing accuracy based on defined scope and deliverables.\nDevelop block flow and process flow diagrams based on client direction\nLeverage appropriate Client standards, generate project specific Process Specifications.\nGenerate vendor bid packages from equipment specifications and complete technical bid analysis based on vendor quotations.\nEvaluate and Define process equipment utility requirements from vendor data and complete utility system capacity studies based on this and site data.\nReview and perform basic process calculations including pump sizing, hydraulic/pipe flow, and heat transfer.\nComplete engineering field surveys and P&ID walkdowns, document findings and ensure resolution where issues are found.\nAttend relevant design and client-based meetings to drive Project scope and deliverables.\nLead process related deviations and provide technical support to manufacturing\nInvestigate, identify root cause for critical deviations and determine CAPA for manufacturing\nWrite product impact assessments to support deviations\nWrite and review technical documentation (batch records, SOPs, protocols & reports)\nParticipate and report to a cross-functional development team to advance production activities\nEnsure successful manufacturing production runs by assessing risk, setting preventative measures in place, investigating, and troubleshooting equipment and process issues\nDesign and execute process development studies to develop a thorough understanding of operating and process performance parameters\nPerform hands-on activities that support process engineering from drafting procedures to execution of commissioning start up studies.\nOther duties as assigned\n\nSkills & Qualifications\nDegree in Biochemical Engineering, Chemical Engineering, Biotechnology or related discipline with at least 2 plus years of GMP Lifesciences, pharmaceutical manufacturing, technology transfer & process development experience required.\nPractical expertise with cGMP manufacturing and regulatory regulations and requirements for pharmaceuticals and devices\nMastery of scientific and engineering Principles\nDemonstrated knowledge of pharmaceutical manufacturing of biotechnology products, aseptic processing, cell therapy products and process development\nAbility to think critically, and demonstrated troubleshooting and problem-solving skills\nExcellent interpersonal, verbal, and written communication skills\nAbility to function efficiently and independently in a changing environment\nSelf-motivated and willing to accept temporary responsibilities outside of initial job description\nWell-developed computer skills\n\nThe Company\nDPS Group is a global EPCM firm offering full-service solutions within the Life Sciences (pharmaceutical, biotechnology, and medical technology) and Advanced Technology (semiconductor, data center, and solar) industries. DPS is dedicated to delivering successful projects with a ‘client-first’ mentality and personal touch across a range of market sectors: Project and Program Management, Procurement, Design, Construction Management, Health and Safety Management, Commissioning, Qualification, and Start-up.\n\nDPS Engineering Inc. is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. DPS does not discriminate in employment opportunities or practices on the basis of: race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by country, regional or local law.","company":"Dps Group","rawCompany":"dps group","city":"Framingham","state":"MA","isRemote":false,"isActive":false,"createdAt":"2026-08-03T13:02:55.935Z","occupations":[{"code":"17-2112.03","title":"Manufacturing Engineers","slug":"manufacturing-engineers"},{"code":"17-2041.00","title":"Chemical Engineers","slug":"chemical-engineers"},{"code":"17-2199.00","title":"Engineers, All Other","slug":"engineers-all-other"}],"industries":[{"code":"325412","title":"Pharmaceutical Preparation Manufacturing","slug":"pharmaceutical-preparation-manufacturing"},{"code":"541714","title":"Research and Development in Biotechnology (except Nanobiotechnology)","slug":"research-and-development-in-biotechnology-except-nanobiotechnology"},{"code":"325414","title":"Biological Product (except Diagnostic) Manufacturing","slug":"biological-product-except-diagnostic-manufacturing"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Process Engineer","description":"Location: Framingham, Massachusetts, United States\nEmployment Type: Full-Time\nReference Code: TSO821799MA\nDate Posted: 04/Nov/2021\nYears of Experience Req.: 0 Years\n\nSummary\nThis is an individual contributor/support position that will act as a part of a larger DPS embedded client-based team providing Process Manufacturing and Engineering design support. The Process Engineer will contribute to the creation of design and technical documents to support our DPS client scope and objectives. Common work products will include generation of PFDs, P&IDs, Process Lists, Equipment Specifications and Commissioning start up protocols for new process equipment. In this position, the Process Engineer will work closely with vendors to ensure technical deliverables are achieved for the scope of the assigned project. The Process Engineer must have a strong desire to learn new technical platforms and process technologies as they apply to the relevant life sciences Clients that DPS support.\n\nKey Responsibilities\nDevelop, Review Approve technical content of P&IDs, and complete back-check process ensuring drawing accuracy based on defined scope and deliverables.\nDevelop block flow and process flow diagrams based on client direction\nLeverage appropriate Client standards, generate project specific Process Specifications.\nGenerate vendor bid packages from equipment specifications and complete technical bid analysis based on vendor quotations.\nEvaluate and Define process equipment utility requirements from vendor data and complete utility system capacity studies based on this and site data.\nReview and perform basic process calculations including pump sizing, hydraulic/pipe flow, and heat transfer.\nComplete engineering field surveys and P&ID walkdowns, document findings and ensure resolution where issues are found.\nAttend relevant design and client-based meetings to drive Project scope and deliverables.\nLead process related deviations and provide technical support to manufacturing\nInvestigate, identify root cause for critical deviations and determine CAPA for manufacturing\nWrite product impact assessments to support deviations\nWrite and review technical documentation (batch records, SOPs, protocols & reports)\nParticipate and report to a cross-functional development team to advance production activities\nEnsure successful manufacturing production runs by assessing risk, setting preventative measures in place, investigating, and troubleshooting equipment and process issues\nDesign and execute process development studies to develop a thorough understanding of operating and process performance parameters\nPerform hands-on activities that support process engineering from drafting procedures to execution of commissioning start up studies.\nOther duties as assigned\n\nSkills & Qualifications\nDegree in Biochemical Engineering, Chemical Engineering, Biotechnology or related discipline with at least 2 plus years of GMP Lifesciences, pharmaceutical manufacturing, technology transfer & process development experience required.\nPractical expertise with cGMP manufacturing and regulatory regulations and requirements for pharmaceuticals and devices\nMastery of scientific and engineering Principles\nDemonstrated knowledge of pharmaceutical manufacturing of biotechnology products, aseptic processing, cell therapy products and process development\nAbility to think critically, and demonstrated troubleshooting and problem-solving skills\nExcellent interpersonal, verbal, and written communication skills\nAbility to function efficiently and independently in a changing environment\nSelf-motivated and willing to accept temporary responsibilities outside of initial job description\nWell-developed computer skills\n\nThe Company\nDPS Group is a global EPCM firm offering full-service solutions within the Life Sciences (pharmaceutical, biotechnology, and medical technology) and Advanced Technology (semiconductor, data center, and solar) industries. DPS is dedicated to delivering successful projects with a ‘client-first’ mentality and personal touch across a range of market sectors: Project and Program Management, Procurement, Design, Construction Management, Health and Safety Management, Commissioning, Qualification, and Start-up.\n\nDPS Engineering Inc. is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. DPS does not discriminate in employment opportunities or practices on the basis of: race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by country, regional or local law.","datePosted":"2026-08-03T13:02:55.935Z","dateModified":"2026-08-03T13:02:55.935Z","hiringOrganization":{"@type":"Organization","name":"Dps Group","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Framingham","addressRegion":"MA","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"ac9b319a433c979f095f397e"},"url":"https://jobsearcher.com/jobs/ac9b319a433c979f095f397e"}}