{"schemaVersion":"jobsearcher.job.v1","id":"9873703e4dcb50983f9d6eab","url":"https://jobsearcher.com/jobs/9873703e4dcb50983f9d6eab","canonicalUrl":"https://jobsearcher.com/jobs/9873703e4dcb50983f9d6eab","title":"Process Engineer","description":"Process Engineer\nInterested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate - streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, and Edge Computing Operators to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services.\nAccelsius is looking for a Process Engineer to join our engineering team as a hands-on manufacturing partner, moving fluidly between the CAD workstation and the shop floor to design and build prototype parts, jigs, and fixtures, develop clear work instructions, and train and certify operators on new processes. This position will report directly to the Director, Operations Engineering and the right candidate will combine strong technical fundamentals with practical, hands-on manufacturing skill and work closely with Quality to ensure processes are robust, repeatable, and well documented.\nRole Responsibilities:\nDesign, build, and iterate on prototype parts, jigs, fixtures, and tooling to support new product introduction and continuous improvement of existing processes.\nCreate and maintain detailed work instructions, process documentation, and visual aids for shop floor operators.\nTrain operators on new and revised processes; develop and administer operator certification programs.\nPartner with Quality to investigate process-related issues, drive root cause analysis, and implement corrective and preventive actions.\nUse CAD software (SolidWorks or equivalent) to design fixtures, tooling, and prototype components.\nSpecify and implement torque control processes, including selection and setup of digital/smart torque tools; support calibration and data-tracking requirements for torque-critical assemblies.\nDefine in-process inspection methods and tools for process-critical criteria; train operators to use these tools effectively and consistently.\nWork with the team to convert work instructions and in-process inspections into a traveler that preserves build history for traceability.\nSupport machine shop activities as needed, including basic machining, fabrication, and modification of fixtures and prototype hardware.\nCollaborate cross-functionally with Design Engineering, Manufacturing Engineering, and Operations to support engineering change orders (ECOs) and product transfers to production.\nIdentify and lead continuous improvement initiatives to improve safety, quality, throughput, and cost.\nMaintain accurate process documentation in the MES and related systems, and support audits as needed.\nQualifications for this role include:\nBachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field.\n5-7+ years of process engineering experience in a manufacturing facility.\nHands-on experience designing and building prototype parts, jigs, and fixtures.\nProficiency in CAD software (SolidWorks strongly preferred).\nAble to read and interpret mechanical drawings, and provide feedback to Design Engineering when needed.\nAble to conceptualize, design, and fabricate fixtures and tooling from concept through implementation.\nExperience creating work instructions for the manufacturing floor.\nDemonstrated experience training and certifying production operators.\nExperience working cross-functionally with Quality teams on process control, non-conformances, and continuous improvement.\nExperience with torque tools; familiarity with digital or smart torque tools and torque data tracking is a strong plus.\nMachine shop experience (manual mill/lathe, basic fabrication) is a plus.\nStartup experience is a plus.\nPreferred Skills:\nExperience with MES systems and electronic work instruction platforms.\nFamiliarity with JIRA or similar tools for tracking engineering changes and issues.\nExperience supporting engineering change order (ECO) processes and product transfers from engineering to production.\nStrong communication skills and the ability to train and mentor production operators effectively.\nPhysical Requirements:\nAbility to work on the manufacturing floor, including standing, bending, and lifting up to 35 lbs. as needed.\nComfortable working with hand tools, power tools, and shop equipment in a manufacturing environment.\nAccelsius offers a competitive salary with equity, a full range of benefits including medical and dental, 401K, and flexible PTO.\nThe position is based on-site at Accelsius's Austin, Texas manufacturing facility.\n\nThis position includes the responsibilities outlined above and may also encompass additional duties as assigned to meet business and compliance needs.\nAccelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.","company":"Accelsius","rawCompany":"accelsius","city":"Austin","state":"TX","isRemote":false,"isActive":false,"createdAt":"2026-08-05T09:54:01.636Z","occupations":[{"code":"17-2112.03","title":"Manufacturing Engineers","slug":"manufacturing-engineers"},{"code":"17-2141.00","title":"Mechanical Engineers","slug":"mechanical-engineers"},{"code":"17-2199.00","title":"Engineers, All Other","slug":"engineers-all-other"}],"industries":[{"code":"333248","title":"All Other Industrial Machinery Manufacturing","slug":"all-other-industrial-machinery-manufacturing"},{"code":"333415","title":"Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing","slug":"air-conditioning-and-warm-air-heating-equipment-and-commercial-and-industrial-refrigeration-equipment-manufacturing"},{"code":"541512","title":"Computer Systems Design Services","slug":"computer-systems-design-services"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Process Engineer","description":"Process Engineer\nInterested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate - streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, and Edge Computing Operators to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services.\nAccelsius is looking for a Process Engineer to join our engineering team as a hands-on manufacturing partner, moving fluidly between the CAD workstation and the shop floor to design and build prototype parts, jigs, and fixtures, develop clear work instructions, and train and certify operators on new processes. This position will report directly to the Director, Operations Engineering and the right candidate will combine strong technical fundamentals with practical, hands-on manufacturing skill and work closely with Quality to ensure processes are robust, repeatable, and well documented.\nRole Responsibilities:\nDesign, build, and iterate on prototype parts, jigs, fixtures, and tooling to support new product introduction and continuous improvement of existing processes.\nCreate and maintain detailed work instructions, process documentation, and visual aids for shop floor operators.\nTrain operators on new and revised processes; develop and administer operator certification programs.\nPartner with Quality to investigate process-related issues, drive root cause analysis, and implement corrective and preventive actions.\nUse CAD software (SolidWorks or equivalent) to design fixtures, tooling, and prototype components.\nSpecify and implement torque control processes, including selection and setup of digital/smart torque tools; support calibration and data-tracking requirements for torque-critical assemblies.\nDefine in-process inspection methods and tools for process-critical criteria; train operators to use these tools effectively and consistently.\nWork with the team to convert work instructions and in-process inspections into a traveler that preserves build history for traceability.\nSupport machine shop activities as needed, including basic machining, fabrication, and modification of fixtures and prototype hardware.\nCollaborate cross-functionally with Design Engineering, Manufacturing Engineering, and Operations to support engineering change orders (ECOs) and product transfers to production.\nIdentify and lead continuous improvement initiatives to improve safety, quality, throughput, and cost.\nMaintain accurate process documentation in the MES and related systems, and support audits as needed.\nQualifications for this role include:\nBachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field.\n5-7+ years of process engineering experience in a manufacturing facility.\nHands-on experience designing and building prototype parts, jigs, and fixtures.\nProficiency in CAD software (SolidWorks strongly preferred).\nAble to read and interpret mechanical drawings, and provide feedback to Design Engineering when needed.\nAble to conceptualize, design, and fabricate fixtures and tooling from concept through implementation.\nExperience creating work instructions for the manufacturing floor.\nDemonstrated experience training and certifying production operators.\nExperience working cross-functionally with Quality teams on process control, non-conformances, and continuous improvement.\nExperience with torque tools; familiarity with digital or smart torque tools and torque data tracking is a strong plus.\nMachine shop experience (manual mill/lathe, basic fabrication) is a plus.\nStartup experience is a plus.\nPreferred Skills:\nExperience with MES systems and electronic work instruction platforms.\nFamiliarity with JIRA or similar tools for tracking engineering changes and issues.\nExperience supporting engineering change order (ECO) processes and product transfers from engineering to production.\nStrong communication skills and the ability to train and mentor production operators effectively.\nPhysical Requirements:\nAbility to work on the manufacturing floor, including standing, bending, and lifting up to 35 lbs. as needed.\nComfortable working with hand tools, power tools, and shop equipment in a manufacturing environment.\nAccelsius offers a competitive salary with equity, a full range of benefits including medical and dental, 401K, and flexible PTO.\nThe position is based on-site at Accelsius's Austin, Texas manufacturing facility.\n\nThis position includes the responsibilities outlined above and may also encompass additional duties as assigned to meet business and compliance needs.\nAccelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.","datePosted":"2026-08-05T09:54:01.636Z","dateModified":"2026-08-05T09:54:01.636Z","hiringOrganization":{"@type":"Organization","name":"Accelsius","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Austin","addressRegion":"TX","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"9873703e4dcb50983f9d6eab"},"url":"https://jobsearcher.com/jobs/9873703e4dcb50983f9d6eab"}}