{"schemaVersion":"jobsearcher.job.v1","id":"58c739b99c7dfd10a8b262bb","url":"https://jobsearcher.com/jobs/58c739b99c7dfd10a8b262bb","canonicalUrl":"https://jobsearcher.com/jobs/58c739b99c7dfd10a8b262bb","title":"Prototype CNC Machinist 5-Axis / Mastercam","description":"Job Description\n\nMachinist IV in Pasadena, CA — $30.50–$57.25/hr DOE, 1st shift, temporary contract. Program and machine complex prototype spacecraft parts on 3- to 5-axis CNC equipment.\r\nTHE BASICS\r\nPay: $30.50–$57.25/hr, depending on experience\r\nShift: 1st shift, 9/80 schedule, 6:00 AM start; exact workdays and end times confirmed before submission\r\nLocation: Pasadena, CA 91109 (on-site)\r\nType: Temp — full-time contract\r\nStart: Interviewing now — immediate start available\r\nExpected assignment end: 10/29/2028\r\nABOUT THE ROLE\r\nOne-off spacecraft hardware calls for a machinist who can plan the work as well as make the part.\r\nProgram, set up, and operate advanced CNC machining centers to produce precision developmental and flight components. Work with engineers on process plans, manufacturability, machining estimates, and efficient resource use.\r\nThis is prototype machining with tight tolerances, self-inspection, and responsibility for complex setups. The source includes simultaneous machine use, lights-out machining, and mentoring other machinists. This temporary assignment is currently scheduled through 10/29/2028. The 9/80 schedule includes extended workdays; exact daily hours and the alternating day off will be confirmed before submission.\r\nWHAT YOU'LL DO\r\nProgram, set up, and operate 3- to 5-axis CNC machining centers\r\nMachine metallic and nonmetallic components to tight tolerances\r\nDevelop process plans and review designs with engineering teams\r\nPropose design-for-manufacturability improvements\r\nSet up and run multiple resources and lights-out machining\r\nInspect parts against drawings and GD&T requirements\r\nPerform routine maintenance and scheduled preventive maintenance\r\nMentor machinists and improve cycle time and machine utilization\r\nWHAT YOU NEED\r\nHigh school diploma with 10 years of related experience, associate degree with 6 years, or bachelor degree with 3 years, plus completed technical training\r\nU.S. citizenship as required by the client\r\nExtensive 5-axis CNC milling, programming, and precision fabrication experience\r\nAt least 5 years of active Mastercam programming experience\r\nVericut simulation experience for collision detection and verification\r\nAbility to interpret complex drawings and GD&T and self-inspect parts\r\nKnowledge of ESD controls when modifying sensitive flight electronic hardware\r\nNICE TO HAVE\r\n12 or more years of aerospace prototype or flight hardware machining\r\nCNC lathes including Okuma, Mori Seiki, or Monarch\r\nElectrical discharge machining\r\nConventional machining and precision toolroom work\r\nLead machinist or team-lead experience\r\nWHY CONTRACTORS CHOOSE FLAG\r\nWeekly pay, every Friday — direct deposit or pay card\r\nMedical benefits available to eligible contractors\r\nPaid sick leave in accordance with California law\r\nReferral bonuses — get paid when you bring in good people\r\nA recruiter who actually answers — you get a direct line, not a call center\r\nPHYSICAL REQUIREMENTS\r\nPerform detailed hands-on fabrication, inspection, assembly, or testing with hand tools and equipment. Use fine manual dexterity and hand-eye coordination, and access the assigned workstations safely. Specific lifting, standing, and access demands will be confirmed before submission.\r\nWORK ENVIRONMENT\r\nPrecision machine shop with CNC equipment, tooling, noise, moving machinery, and metalworking processes. Follow machine guarding and flight-hardware handling requirements. PPE is required and provided where applicable, and all site safety procedures apply.\r\nHOW TO APPLY\r\nHit Apply and a FLAG recruiter will review your background within one business day. If you're a fit, we'll call you to talk through the work, the shift, and the pay before anything gets submitted to the client — no surprises.\r\nQuestions first? Call 562-242-7655 or email .\r\nABOUT FLAG SOLUTIONS\r\nFLAG Solutions is a Southern California staffing firm with offices in Fullerton and Long Beach, specializing in skilled manufacturing and professional placement across aerospace and defense, food and beverage, automotive, pharmaceutical, and electronics.\r\nFLAG Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.\r\nThe pay scale stated above is the range FLAG Solutions in good faith expects to pay for this position at the time of posting. Actual compensation depends on experience, skills, and other job-related factors.\r\nQualified applicants with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act and all applicable local fair chance ordinances.\r\nFLAG Solutions is the employer of record for this position.","company":"Flag Solutions","rawCompany":"flag solutions","city":"Pasadena","state":"CA","isRemote":false,"isActive":false,"createdAt":"2026-11-03T02:23:36.759Z","occupations":[{"code":"51-4041.00","title":"Machinists","slug":"machinists"},{"code":"51-9162.00","title":"Computer Numerically Controlled Tool Programmers","slug":"computer-numerically-controlled-tool-programmers"},{"code":"51-9161.00","title":"Computer Numerically Controlled Tool Operators","slug":"computer-numerically-controlled-tool-operators"}],"industries":[{"code":"332710","title":"Machine Shops","slug":"machine-shops"},{"code":"541715","title":"Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)","slug":"research-and-development-in-the-physical-engineering-and-life-sciences-except-nanotechnology-and-biotechnology"},{"code":"927110","title":"Space Research and Technology","slug":"space-research-and-technology"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Prototype CNC Machinist 5-Axis / Mastercam","description":"Job Description\n\nMachinist IV in Pasadena, CA — $30.50–$57.25/hr DOE, 1st shift, temporary contract. Program and machine complex prototype spacecraft parts on 3- to 5-axis CNC equipment.\r\nTHE BASICS\r\nPay: $30.50–$57.25/hr, depending on experience\r\nShift: 1st shift, 9/80 schedule, 6:00 AM start; exact workdays and end times confirmed before submission\r\nLocation: Pasadena, CA 91109 (on-site)\r\nType: Temp — full-time contract\r\nStart: Interviewing now — immediate start available\r\nExpected assignment end: 10/29/2028\r\nABOUT THE ROLE\r\nOne-off spacecraft hardware calls for a machinist who can plan the work as well as make the part.\r\nProgram, set up, and operate advanced CNC machining centers to produce precision developmental and flight components. Work with engineers on process plans, manufacturability, machining estimates, and efficient resource use.\r\nThis is prototype machining with tight tolerances, self-inspection, and responsibility for complex setups. The source includes simultaneous machine use, lights-out machining, and mentoring other machinists. This temporary assignment is currently scheduled through 10/29/2028. The 9/80 schedule includes extended workdays; exact daily hours and the alternating day off will be confirmed before submission.\r\nWHAT YOU'LL DO\r\nProgram, set up, and operate 3- to 5-axis CNC machining centers\r\nMachine metallic and nonmetallic components to tight tolerances\r\nDevelop process plans and review designs with engineering teams\r\nPropose design-for-manufacturability improvements\r\nSet up and run multiple resources and lights-out machining\r\nInspect parts against drawings and GD&T requirements\r\nPerform routine maintenance and scheduled preventive maintenance\r\nMentor machinists and improve cycle time and machine utilization\r\nWHAT YOU NEED\r\nHigh school diploma with 10 years of related experience, associate degree with 6 years, or bachelor degree with 3 years, plus completed technical training\r\nU.S. citizenship as required by the client\r\nExtensive 5-axis CNC milling, programming, and precision fabrication experience\r\nAt least 5 years of active Mastercam programming experience\r\nVericut simulation experience for collision detection and verification\r\nAbility to interpret complex drawings and GD&T and self-inspect parts\r\nKnowledge of ESD controls when modifying sensitive flight electronic hardware\r\nNICE TO HAVE\r\n12 or more years of aerospace prototype or flight hardware machining\r\nCNC lathes including Okuma, Mori Seiki, or Monarch\r\nElectrical discharge machining\r\nConventional machining and precision toolroom work\r\nLead machinist or team-lead experience\r\nWHY CONTRACTORS CHOOSE FLAG\r\nWeekly pay, every Friday — direct deposit or pay card\r\nMedical benefits available to eligible contractors\r\nPaid sick leave in accordance with California law\r\nReferral bonuses — get paid when you bring in good people\r\nA recruiter who actually answers — you get a direct line, not a call center\r\nPHYSICAL REQUIREMENTS\r\nPerform detailed hands-on fabrication, inspection, assembly, or testing with hand tools and equipment. Use fine manual dexterity and hand-eye coordination, and access the assigned workstations safely. Specific lifting, standing, and access demands will be confirmed before submission.\r\nWORK ENVIRONMENT\r\nPrecision machine shop with CNC equipment, tooling, noise, moving machinery, and metalworking processes. Follow machine guarding and flight-hardware handling requirements. PPE is required and provided where applicable, and all site safety procedures apply.\r\nHOW TO APPLY\r\nHit Apply and a FLAG recruiter will review your background within one business day. If you're a fit, we'll call you to talk through the work, the shift, and the pay before anything gets submitted to the client — no surprises.\r\nQuestions first? Call 562-242-7655 or email .\r\nABOUT FLAG SOLUTIONS\r\nFLAG Solutions is a Southern California staffing firm with offices in Fullerton and Long Beach, specializing in skilled manufacturing and professional placement across aerospace and defense, food and beverage, automotive, pharmaceutical, and electronics.\r\nFLAG Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.\r\nThe pay scale stated above is the range FLAG Solutions in good faith expects to pay for this position at the time of posting. Actual compensation depends on experience, skills, and other job-related factors.\r\nQualified applicants with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act and all applicable local fair chance ordinances.\r\nFLAG Solutions is the employer of record for this position.","datePosted":"2026-11-03T02:23:36.759Z","dateModified":"2026-11-03T02:23:36.759Z","hiringOrganization":{"@type":"Organization","name":"Flag Solutions","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Pasadena","addressRegion":"CA","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"58c739b99c7dfd10a8b262bb"},"url":"https://jobsearcher.com/jobs/58c739b99c7dfd10a8b262bb"}}