{"schemaVersion":"jobsearcher.job.v1","id":"562589b43d4486899a7e5c0a","url":"https://jobsearcher.com/jobs/562589b43d4486899a7e5c0a","canonicalUrl":"https://jobsearcher.com/jobs/562589b43d4486899a7e5c0a","title":"Sr. RF Front-End Engineer Phased Array Antenna & RF Front-End Electronics","description":"Ready to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place!\nE-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems.\nWe’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life.\nE-Space is seeking a Senior RF Front-End Engineer to design, develop, integrate, and verify flight RF front-end electronics for spacecraft phased-array antennas and satellite communication systems. This hands‑on role provides end‑to‑end ownership—from translating system requirements into device‑level RF/microwave circuit designs through schematic capture, board layout, prototype bring‑up, testing, and simulation‑to‑measurement correlation. The engineer will develop robust RF hardware for operation in the space environment while collaborating closely with our principal RF engineer and the broader antenna electronics team.\nWhat you will do:\n\nOwn RF front-end hardware from requirements and architecture through device‑level circuit design, schematic capture, PCB layout, prototype bring‑up, qualification, and release.\nDesign transmit and receive chains using power amplifiers, low‑noise amplifiers, filters, duplexers, switches, couplers, attenuators, mixers, synthesizers, transceivers, phase shifters, beamformer devices, and RF matching networks.\nPerform RF cascade analyses and architectural trade studies covering gain, noise figure, sensitivity, linearity, P1dB, IP3, dynamic range, EIRP, efficiency, stability, spurious performance, and link margin, including simultaneous transmit‑and‑receive architectures using frequency‑division duplexing.\nDefine component specifications and select parts based on RF performance, power consumption, thermal behavior, size, manufacturability, availability, cost, reliability, and suitability for the space environment.\nDesign and review controlled‑impedance transmission lines, grounding, shielding, bias networks, RF PCB stackups, and critical component placement and routing.\nDevelop RF and mixed‑signal boards incorporating ADCs, DACs, modulation, and demodulation where digitized RF interfaces are required.\nContribute to RF signal‑distribution architectures that transport RF signals over fiber‑optic links using analog RF‑photonic or digitized approaches.\nIntegrate RF electronics with phased‑array antenna elements, beamforming networks, digital and baseband electronics, firmware, power systems, thermal systems, and mechanical structures.\nDevelop and execute amplitude and phase calibration methods for phased‑array RF channels, accounting for channel variation, temperature effects, mutual coupling, and calibration stability.\nPlan and conduct RF characterization using VNAs, spectrum analyzers, signal generators, power meters, noise‑figure equipment, oscilloscopes, and near‑field or far‑field antenna ranges.\nSupport environmental qualification of spaceflight hardware, including thermal‑vacuum, vibration, and radiation testing.\nCorrelate simulation results with measurements, identify the root causes of performance discrepancies, and drive corrective actions through data‑driven troubleshooting.\nDocument requirements, analyses, design decisions, test procedures, results, and technical risks, and present clear recommendations at design reviews.\nCollaborate with antenna, RF systems, digital, firmware, mechanical, thermal, manufacturing, test, regulatory, and program teams to close requirements and interfaces.\nMentor engineers and technicians and help establish repeatable RF design, calibration, qualification, and verification practices.\n\nMinimum qualifications:\n\nBachelor's degree in Electrical Engineering, RF/Microwave Engineering, or a related field, with 8+ years of relevant experience; or a Master's degree with 6+ years; or a Ph.D. with 4+ years.\nDemonstrated hands‑on ownership of RF front‑end hardware from design and analysis through prototype fabrication, bring‑up, and verification.\nStrong understanding of RF fundamentals, including S‑parameters, impedance matching, transmission lines, noise figure, gain compression, intermodulation, stability, isolation, filtering, and RF power measurement.\nExperience designing or integrating RF electronics for phased arrays, beamforming systems, radar, wireless communications, satellite communications, or a comparably complex multi‑channel RF system.\nExperience with RF circuit simulation tools such as Keysight ADS, Cadence AWR, or equivalent, and with schematic capture and PCB layout review tools.\nHands‑on experience operating RF laboratory equipment and independently troubleshooting complex RF hardware.\nAbility to communicate technical issues clearly, work across disciplines, and make data‑driven decisions under schedule constraints.\n\nPreferred qualifications:\n\nExperience with active phased arrays, element‑level or subarray RF chains, beamformer ICs, and amplitude/phase calibration.\nExperience with electromagnetic and system tools such as Ansys HFSS, CST Studio Suite, Altair FEKO, MATLAB, Python, or Keysight SystemVue.\nExperience with UHF or other satellite communication bands, circular polarization, link budgets, antenna gain/EIRP, scan loss, sidelobes, grating lobes, and mutual coupling.\nExperience designing RF hardware for space, aerospace, defense, automotive, or another high‑reliability environment.\nKnowledge of environmental qualification, EMC/EMI, radiation effects, vibration, thermal‑vacuum considerations, and design for test and manufacturing.\nExperience working with suppliers, contract manufacturers, and cross‑site engineering teams.\nExperience with RF‑photonic signal distribution.\nExperience with mixed‑signal RF interfaces (ADC/DAC, modulators/demodulators, SDR).\nFamiliarity with frequency‑division duplex or other full‑duplex RF front‑end architectures.\nPython for RF test automation and data analysis.\n\nAdditional Requirements\nThis is a fast‑paced, high‑impact environment - flexibility to occasionally work extended hours or weekends during critical periods is expected.\n$160,000 - $195,000 a year\nWhy E-Space is right for you:\n\nAn opportunity to really make a difference\nSustainability at our core\nFair and honest workplace\nInnovative thinking is encouraged\nCompetitive salaries\nContinuous learning and development\nHealth and wellness care options\nFinancial solutions for the future\nOptional legal services (US only)\nPaid holidays\nPaid time off\n\nAs a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry.\n#J-18808-Ljbffr","company":"Lever","rawCompany":"lever","city":"Eastern","state":"KY","isRemote":false,"isActive":false,"createdAt":"2026-10-08T04:06:00.138Z","occupations":[{"code":"17-2072.00","title":"Electronics Engineers, Except Computer","slug":"electronics-engineers-except-computer"},{"code":"17-2011.00","title":"Aerospace Engineers","slug":"aerospace-engineers"},{"code":"15-1241.01","title":"Telecommunications Engineering Specialists","slug":"telecommunications-engineering-specialists"}],"industries":[{"code":"927110","title":"Space Research and Technology","slug":"space-research-and-technology"},{"code":"334511","title":"Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing","slug":"search-detection-navigation-guidance-aeronautical-and-nautical-system-and-instrument-manufacturing"},{"code":"336414","title":"Guided Missile and Space Vehicle Manufacturing","slug":"guided-missile-and-space-vehicle-manufacturing"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Sr. RF Front-End Engineer Phased Array Antenna & RF Front-End Electronics","description":"Ready to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place!\nE-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems.\nWe’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life.\nE-Space is seeking a Senior RF Front-End Engineer to design, develop, integrate, and verify flight RF front-end electronics for spacecraft phased-array antennas and satellite communication systems. This hands‑on role provides end‑to‑end ownership—from translating system requirements into device‑level RF/microwave circuit designs through schematic capture, board layout, prototype bring‑up, testing, and simulation‑to‑measurement correlation. The engineer will develop robust RF hardware for operation in the space environment while collaborating closely with our principal RF engineer and the broader antenna electronics team.\nWhat you will do:\n\nOwn RF front-end hardware from requirements and architecture through device‑level circuit design, schematic capture, PCB layout, prototype bring‑up, qualification, and release.\nDesign transmit and receive chains using power amplifiers, low‑noise amplifiers, filters, duplexers, switches, couplers, attenuators, mixers, synthesizers, transceivers, phase shifters, beamformer devices, and RF matching networks.\nPerform RF cascade analyses and architectural trade studies covering gain, noise figure, sensitivity, linearity, P1dB, IP3, dynamic range, EIRP, efficiency, stability, spurious performance, and link margin, including simultaneous transmit‑and‑receive architectures using frequency‑division duplexing.\nDefine component specifications and select parts based on RF performance, power consumption, thermal behavior, size, manufacturability, availability, cost, reliability, and suitability for the space environment.\nDesign and review controlled‑impedance transmission lines, grounding, shielding, bias networks, RF PCB stackups, and critical component placement and routing.\nDevelop RF and mixed‑signal boards incorporating ADCs, DACs, modulation, and demodulation where digitized RF interfaces are required.\nContribute to RF signal‑distribution architectures that transport RF signals over fiber‑optic links using analog RF‑photonic or digitized approaches.\nIntegrate RF electronics with phased‑array antenna elements, beamforming networks, digital and baseband electronics, firmware, power systems, thermal systems, and mechanical structures.\nDevelop and execute amplitude and phase calibration methods for phased‑array RF channels, accounting for channel variation, temperature effects, mutual coupling, and calibration stability.\nPlan and conduct RF characterization using VNAs, spectrum analyzers, signal generators, power meters, noise‑figure equipment, oscilloscopes, and near‑field or far‑field antenna ranges.\nSupport environmental qualification of spaceflight hardware, including thermal‑vacuum, vibration, and radiation testing.\nCorrelate simulation results with measurements, identify the root causes of performance discrepancies, and drive corrective actions through data‑driven troubleshooting.\nDocument requirements, analyses, design decisions, test procedures, results, and technical risks, and present clear recommendations at design reviews.\nCollaborate with antenna, RF systems, digital, firmware, mechanical, thermal, manufacturing, test, regulatory, and program teams to close requirements and interfaces.\nMentor engineers and technicians and help establish repeatable RF design, calibration, qualification, and verification practices.\n\nMinimum qualifications:\n\nBachelor's degree in Electrical Engineering, RF/Microwave Engineering, or a related field, with 8+ years of relevant experience; or a Master's degree with 6+ years; or a Ph.D. with 4+ years.\nDemonstrated hands‑on ownership of RF front‑end hardware from design and analysis through prototype fabrication, bring‑up, and verification.\nStrong understanding of RF fundamentals, including S‑parameters, impedance matching, transmission lines, noise figure, gain compression, intermodulation, stability, isolation, filtering, and RF power measurement.\nExperience designing or integrating RF electronics for phased arrays, beamforming systems, radar, wireless communications, satellite communications, or a comparably complex multi‑channel RF system.\nExperience with RF circuit simulation tools such as Keysight ADS, Cadence AWR, or equivalent, and with schematic capture and PCB layout review tools.\nHands‑on experience operating RF laboratory equipment and independently troubleshooting complex RF hardware.\nAbility to communicate technical issues clearly, work across disciplines, and make data‑driven decisions under schedule constraints.\n\nPreferred qualifications:\n\nExperience with active phased arrays, element‑level or subarray RF chains, beamformer ICs, and amplitude/phase calibration.\nExperience with electromagnetic and system tools such as Ansys HFSS, CST Studio Suite, Altair FEKO, MATLAB, Python, or Keysight SystemVue.\nExperience with UHF or other satellite communication bands, circular polarization, link budgets, antenna gain/EIRP, scan loss, sidelobes, grating lobes, and mutual coupling.\nExperience designing RF hardware for space, aerospace, defense, automotive, or another high‑reliability environment.\nKnowledge of environmental qualification, EMC/EMI, radiation effects, vibration, thermal‑vacuum considerations, and design for test and manufacturing.\nExperience working with suppliers, contract manufacturers, and cross‑site engineering teams.\nExperience with RF‑photonic signal distribution.\nExperience with mixed‑signal RF interfaces (ADC/DAC, modulators/demodulators, SDR).\nFamiliarity with frequency‑division duplex or other full‑duplex RF front‑end architectures.\nPython for RF test automation and data analysis.\n\nAdditional Requirements\nThis is a fast‑paced, high‑impact environment - flexibility to occasionally work extended hours or weekends during critical periods is expected.\n$160,000 - $195,000 a year\nWhy E-Space is right for you:\n\nAn opportunity to really make a difference\nSustainability at our core\nFair and honest workplace\nInnovative thinking is encouraged\nCompetitive salaries\nContinuous learning and development\nHealth and wellness care options\nFinancial solutions for the future\nOptional legal services (US only)\nPaid holidays\nPaid time off\n\nAs a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry.\n#J-18808-Ljbffr","datePosted":"2026-10-08T04:06:00.138Z","dateModified":"2026-10-08T04:06:00.138Z","hiringOrganization":{"@type":"Organization","name":"Lever","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Eastern","addressRegion":"KY","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"562589b43d4486899a7e5c0a"},"url":"https://jobsearcher.com/jobs/562589b43d4486899a7e5c0a"}}