{"schemaVersion":"jobsearcher.job.v1","id":"3fa7d4053934c75898af9e09","url":"https://jobsearcher.com/jobs/3fa7d4053934c75898af9e09","canonicalUrl":"https://jobsearcher.com/jobs/3fa7d4053934c75898af9e09","title":"Controls Engineer","description":"We have a Controls Engineer position open in Orlando, FL.\n\nThis position is responsible for electrical/controls engineering on large scale projects.\n\nProject requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.\n\nRESPONSIBILITIES\n\nMust be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters\n\nResponsible for system design from blank sheet of paper to create concept of electrical/control/system components based on project requirements\n\nExperience doing design via drafting software (AutoCAD preferred)\n\nProvide input, and system modification as needed, for system integration with other project disciplines\n\nAble to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout\n\nManage vendor scope to verify safety, functionality, and all contract requirements are satisfied\n\nEnsures design complies with any local or government agency design/implementation codes in addition to client codes/standards\n\nKnowledge of analyzing system design for Hazard analysis development and mitigation\n\nDesign and analysis for safety critical parts within a control system\n\nDesigning redundant mitigations in system to increase safety and reliability\n\nDesigning systems with complex motion and integration from automated systems\n\nDevelops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans\n\nAble to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)\n\nDesigns, develops, and implements DCS/PLC control system (logic software) to meet process requirements. As well as the ability to understand and implement client design standards for software system\n\nUnderstanding of control system components and instrumentation to properly design software interface/control to achieve system functionality\n\nDevelops documents detailing control/software configuration and design. Documents include: Theory/Description of operation, Detailed control system design description, Software design plan, Detailed software implementation/description, system implementation/acceptance test plans\n\nKnowledge of design, troubleshooting, and code implementation for the following programming languages: Ladder logic (required), C++ (preferred), visual basic (preferred), and structured text (required)\n\nAbility to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface\n\nCan design code that is efficient (not processor resource heavy) while maintaining a minimalist implementation to help facility future modifications and understanding by client post turnover. This includes providing any documentation and/or tools that will assist with program understanding and troubleshooting\n\nAbility to diagnose control system issues during troubleshooting to assist in determining root cause (trending, system analysis, test logic, etc.)\n\nAbility to minimize secondary faults from occurring within logic by programming smart diagnostics that can determine root cause and minimize further effects caused by initial fault\n\nWill assist with initial start-up and debug integrated systems and the development of system documentation\n\nIndividual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing\n\nWill act as technical lead on projects and may guide lower level engineers, technicians, and contractors\n\nKnowledge of ride system design for attractions involving guests is preferred\n\nCapable of working off shifts as needed during installation/commissioning to support project\n\nQUALIFICATIONS\n\nMust be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters\n\nEducation – bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)\n\nExperience – 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, safety engineering, instrumentation, components, and logic programming. Experience with AutoCAD is also desired\n\nKey Competencies – Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet based distributed remote I/O systems\n\nSkills – All employees are required to be proficient in the use of Microsoft Windows and Office environments\n\nTravel – Ability to travel up to 30% worst case (10% is typical with last couple years depending on project)\n\nPhysical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling\n\nWorking Condition\nExpected on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.\n\n#J-18808-Ljbffr","company":"Dilectus Workforce Solutions","rawCompany":"dilectus workforce solutions","city":"Orlando","state":"FL","isRemote":false,"isActive":false,"createdAt":"2026-07-16T03:33:27.110Z","occupations":[{"code":"17-2071.00","title":"Electrical Engineers","slug":"electrical-engineers"},{"code":"17-2072.00","title":"Electronics Engineers, Except Computer","slug":"electronics-engineers-except-computer"},{"code":"17-2199.00","title":"Engineers, All Other","slug":"engineers-all-other"}],"industries":[{"code":"541330","title":"Engineering Services","slug":"engineering-services"},{"code":"335314","title":"Relay and Industrial Control Manufacturing","slug":"relay-and-industrial-control-manufacturing"},{"code":"334513","title":"Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables","slug":"instruments-and-related-products-manufacturing-for-measuring-displaying-and-controlling-industrial-process-variables"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Controls Engineer","description":"We have a Controls Engineer position open in Orlando, FL.\n\nThis position is responsible for electrical/controls engineering on large scale projects.\n\nProject requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.\n\nRESPONSIBILITIES\n\nMust be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters\n\nResponsible for system design from blank sheet of paper to create concept of electrical/control/system components based on project requirements\n\nExperience doing design via drafting software (AutoCAD preferred)\n\nProvide input, and system modification as needed, for system integration with other project disciplines\n\nAble to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout\n\nManage vendor scope to verify safety, functionality, and all contract requirements are satisfied\n\nEnsures design complies with any local or government agency design/implementation codes in addition to client codes/standards\n\nKnowledge of analyzing system design for Hazard analysis development and mitigation\n\nDesign and analysis for safety critical parts within a control system\n\nDesigning redundant mitigations in system to increase safety and reliability\n\nDesigning systems with complex motion and integration from automated systems\n\nDevelops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans\n\nAble to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)\n\nDesigns, develops, and implements DCS/PLC control system (logic software) to meet process requirements. As well as the ability to understand and implement client design standards for software system\n\nUnderstanding of control system components and instrumentation to properly design software interface/control to achieve system functionality\n\nDevelops documents detailing control/software configuration and design. Documents include: Theory/Description of operation, Detailed control system design description, Software design plan, Detailed software implementation/description, system implementation/acceptance test plans\n\nKnowledge of design, troubleshooting, and code implementation for the following programming languages: Ladder logic (required), C++ (preferred), visual basic (preferred), and structured text (required)\n\nAbility to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface\n\nCan design code that is efficient (not processor resource heavy) while maintaining a minimalist implementation to help facility future modifications and understanding by client post turnover. This includes providing any documentation and/or tools that will assist with program understanding and troubleshooting\n\nAbility to diagnose control system issues during troubleshooting to assist in determining root cause (trending, system analysis, test logic, etc.)\n\nAbility to minimize secondary faults from occurring within logic by programming smart diagnostics that can determine root cause and minimize further effects caused by initial fault\n\nWill assist with initial start-up and debug integrated systems and the development of system documentation\n\nIndividual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing\n\nWill act as technical lead on projects and may guide lower level engineers, technicians, and contractors\n\nKnowledge of ride system design for attractions involving guests is preferred\n\nCapable of working off shifts as needed during installation/commissioning to support project\n\nQUALIFICATIONS\n\nMust be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters\n\nEducation – bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)\n\nExperience – 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, safety engineering, instrumentation, components, and logic programming. Experience with AutoCAD is also desired\n\nKey Competencies – Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet based distributed remote I/O systems\n\nSkills – All employees are required to be proficient in the use of Microsoft Windows and Office environments\n\nTravel – Ability to travel up to 30% worst case (10% is typical with last couple years depending on project)\n\nPhysical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling\n\nWorking Condition\nExpected on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.\n\n#J-18808-Ljbffr","datePosted":"2026-07-16T03:33:27.110Z","dateModified":"2026-07-16T03:33:27.110Z","hiringOrganization":{"@type":"Organization","name":"Dilectus Workforce Solutions","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Orlando","addressRegion":"FL","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"3fa7d4053934c75898af9e09"},"url":"https://jobsearcher.com/jobs/3fa7d4053934c75898af9e09"}}