{"schemaVersion":"jobsearcher.job.v1","id":"36ed53735f94f1e965f2040c","url":"https://jobsearcher.com/jobs/36ed53735f94f1e965f2040c","canonicalUrl":"https://jobsearcher.com/jobs/36ed53735f94f1e965f2040c","title":"Programming Engineer","description":"LTTS US Branch\nPineville, Louisiana\nJob Description\nSkills: • Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.\n\nDesign Control System Architecture (CSA).\nDesign electrical & control panel layout, control schematic drawings and Bill of Material (BOM).\nDesign, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.\nReview vendor & engineering documents as per project requirement.\nProvide support for PLC and HMI programming.\nDevelopment and Modification of PLC program.\nDevelopment of SCADA project as per customer needs.\nIntegration of Equipment system in the Plant.\nSupport Operation team for existing system.\nWork with Project/Engineering team for new system.\nDesign feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.\nUnderstand the electrical drawings, P&IDs.\nPerform Yellow lining, IQOQ, troubleshoot electrical circuits.\nUnderstand the existing control system and provide support to reduce the current losses.\nDesign control study / URD (User Required Document) for the PLC & HMI programming.\nUnderstand and Integrate Different systems in the plant.\nHelp the team understand the cause of loss based on historical data.\nDesign and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.\nDeliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.\nPerform multi-discipline and vendor co-ordination for new equipment installation.\n\nJob Description & Skill Requirement:\n\nPLC & HMI Programming:\no Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench\no Wonderware, Archestra\n\nControl Hardware:\no Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,\n\nCommunication Networks -Ethernet, Profinet, Profibus, Modbus etc.\nMachine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.\n5 + Years of Experience.\nPLC & HMI Programming:\nElectrical & Control Drawing Software - AutoCAD\nExperience with Making (Process), or Packing system.\n\nProgramming Standards:\n\nLadder, FBD (Functional Block Diagram),\nPackML (Packing Machine Language),\nSafety PLC Programming\nMicrosoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware\nMachine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.\nKnowledge of NFPA 70E requirements and experience with associated electrical PPE.\nStrong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.\nManufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.\nSupport execution from concept through validation to startup activities.\n\nQualification:\n\nEngineering (BE /B.Tech /BS/MS)\nJob Requirement\nSkills: • Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.\n\nDesign Control System Architecture (CSA).\nDesign electrical & control panel layout, control schematic drawings and Bill of Material (BOM).\nDesign, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.\nReview vendor & engineering documents as per project requirement.\nProvide support for PLC and HMI programming.\nDevelopment and Modification of PLC program.\nDevelopment of SCADA project as per customer needs.\nIntegration of Equipment system in the Plant.\nSupport Operation team for existing system.\nWork with Project/Engineering team for new system.\nDesign feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.\nUnderstand the electrical drawings, P&IDs.\nPerform Yellow lining, IQOQ, troubleshoot electrical circuits.\nUnderstand the existing control system and provide support to reduce the current losses.\nDesign control study / URD (User Required Document) for the PLC & HMI programming.\nUnderstand and Integrate Different systems in the plant.\nHelp the team understand the cause of loss based on historical data.\nDesign and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.\nDeliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.\nPerform multi-discipline and vendor co-ordination for new equipment installation.\n\nJob Description & Skill Requirement:\n\nPLC & HMI Programming:\no Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench\no Wonderware, Archestra\n\nControl Hardware:\no Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,\n\nCommunication Networks -Ethernet, Profinet, Profibus, Modbus etc.\nMachine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.\n5 + Years of Experience.\nPLC & HMI Programming:\nElectrical & Control Drawing Software - AutoCAD\nExperience with Making (Process), or Packing system.\n\nProgramming Standards:\n\nLadder, FBD (Functional Block Diagram),\nPackML (Packing Machine Language),\nSafety PLC Programming\nMicrosoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware\nMachine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.\nKnowledge of NFPA 70E requirements and experience with associated electrical PPE.\nStrong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.\nManufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.\nSupport execution from concept through validation to startup activities.\n\nQualification:\n\nEngineering (BE /B.Tech /BS/MS)","company":"Lt Technology Services","rawCompany":"lt technology services","city":"Pineville","state":"LA","isRemote":false,"isActive":false,"createdAt":"2026-04-14T10:34:03.628Z","occupations":[{"code":"17-2071.00","title":"Electrical Engineers","slug":"electrical-engineers"},{"code":"15-1252.00","title":"Software Developers","slug":"software-developers"},{"code":"17-3023.00","title":"Electrical and Electronic Engineering Technologists and Technicians","slug":"electrical-and-electronic-engineering-technologists-and-technicians"}],"industries":[{"code":"541330","title":"Engineering Services","slug":"engineering-services"},{"code":"541512","title":"Computer Systems Design Services","slug":"computer-systems-design-services"},{"code":"541511","title":"Custom Computer Programming Services","slug":"custom-computer-programming-services"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Programming Engineer","description":"LTTS US Branch\nPineville, Louisiana\nJob Description\nSkills: • Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.\n\nDesign Control System Architecture (CSA).\nDesign electrical & control panel layout, control schematic drawings and Bill of Material (BOM).\nDesign, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.\nReview vendor & engineering documents as per project requirement.\nProvide support for PLC and HMI programming.\nDevelopment and Modification of PLC program.\nDevelopment of SCADA project as per customer needs.\nIntegration of Equipment system in the Plant.\nSupport Operation team for existing system.\nWork with Project/Engineering team for new system.\nDesign feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.\nUnderstand the electrical drawings, P&IDs.\nPerform Yellow lining, IQOQ, troubleshoot electrical circuits.\nUnderstand the existing control system and provide support to reduce the current losses.\nDesign control study / URD (User Required Document) for the PLC & HMI programming.\nUnderstand and Integrate Different systems in the plant.\nHelp the team understand the cause of loss based on historical data.\nDesign and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.\nDeliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.\nPerform multi-discipline and vendor co-ordination for new equipment installation.\n\nJob Description & Skill Requirement:\n\nPLC & HMI Programming:\no Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench\no Wonderware, Archestra\n\nControl Hardware:\no Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,\n\nCommunication Networks -Ethernet, Profinet, Profibus, Modbus etc.\nMachine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.\n5 + Years of Experience.\nPLC & HMI Programming:\nElectrical & Control Drawing Software - AutoCAD\nExperience with Making (Process), or Packing system.\n\nProgramming Standards:\n\nLadder, FBD (Functional Block Diagram),\nPackML (Packing Machine Language),\nSafety PLC Programming\nMicrosoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware\nMachine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.\nKnowledge of NFPA 70E requirements and experience with associated electrical PPE.\nStrong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.\nManufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.\nSupport execution from concept through validation to startup activities.\n\nQualification:\n\nEngineering (BE /B.Tech /BS/MS)\nJob Requirement\nSkills: • Provide support for installation, commissioning, start-up and troubleshooting for various control and automation projects.\n\nDesign Control System Architecture (CSA).\nDesign electrical & control panel layout, control schematic drawings and Bill of Material (BOM).\nDesign, review and perform safety validation, safety maps, IQ/OQ, documents for new equipment installation at site.\nReview vendor & engineering documents as per project requirement.\nProvide support for PLC and HMI programming.\nDevelopment and Modification of PLC program.\nDevelopment of SCADA project as per customer needs.\nIntegration of Equipment system in the Plant.\nSupport Operation team for existing system.\nWork with Project/Engineering team for new system.\nDesign feasibility study design basis document and detail engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.\nUnderstand the electrical drawings, P&IDs.\nPerform Yellow lining, IQOQ, troubleshoot electrical circuits.\nUnderstand the existing control system and provide support to reduce the current losses.\nDesign control study / URD (User Required Document) for the PLC & HMI programming.\nUnderstand and Integrate Different systems in the plant.\nHelp the team understand the cause of loss based on historical data.\nDesign and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.\nDeliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.\nPerform multi-discipline and vendor co-ordination for new equipment installation.\n\nJob Description & Skill Requirement:\n\nPLC & HMI Programming:\no Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench\no Wonderware, Archestra\n\nControl Hardware:\no Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, Panel View Plus HMIs, Point I/O, Power Flex 520 Series VFDs, Power Flex 7 Class, Power Flex 4 Class,\n\nCommunication Networks -Ethernet, Profinet, Profibus, Modbus etc.\nMachine level automation experience, Motion - Kinetix programming, experience with CPG, FMCG customer.\n5 + Years of Experience.\nPLC & HMI Programming:\nElectrical & Control Drawing Software - AutoCAD\nExperience with Making (Process), or Packing system.\n\nProgramming Standards:\n\nLadder, FBD (Functional Block Diagram),\nPackML (Packing Machine Language),\nSafety PLC Programming\nMicrosoft Tools: Windows 7, Windows 10, MS Excel, MS Word, MS PowerPoint, MS Outlook; VM Ware\nMachine safety requirements and implementation (safety relays and circuits), including NFPA79 and CBA 2050.\nKnowledge of NFPA 70E requirements and experience with associated electrical PPE.\nStrong work ethic and initiative; can plan and execute work with minimal direction. Works well with peers and 'customers'; collaborative and responsive. Ability to learn faster.\nManufacturing, Packing, Making, and Facilities experience, including installation, maintenance, troubleshooting, and optimization.\nSupport execution from concept through validation to startup activities.\n\nQualification:\n\nEngineering (BE /B.Tech /BS/MS)","datePosted":"2026-04-14T10:34:03.628Z","dateModified":"2026-04-14T10:34:03.628Z","hiringOrganization":{"@type":"Organization","name":"Lt Technology Services","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Pineville","addressRegion":"LA","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"36ed53735f94f1e965f2040c"},"url":"https://jobsearcher.com/jobs/36ed53735f94f1e965f2040c"}}