{"schemaVersion":"jobsearcher.job.v1","id":"32d356496026e1f9dab07f9d","url":"https://jobsearcher.com/jobs/32d356496026e1f9dab07f9d","canonicalUrl":"https://jobsearcher.com/jobs/32d356496026e1f9dab07f9d","title":"Data Center Structured Cabling","description":"Structured Cabling Technician – Lead Installer\nContract-to-Hire | On-Site | Hyperscale Data Center Build\nApproximate start date: 2nd week of September to 4th week of September\nAbout Startech Networks\nStartech Networks Inc. (STN) is a network infrastructure services provider specializing in hyperscale data center deployment. We deliver structured cabling, rack & stack, and complete network build-outs for major hyperscale operators and their prime contractors, and we operate large field crews across greenfield, colocation, and campus environments.\nRole Overview\nStartech is hiring approximately 40 experienced Structured Cabling Technicians to join our current hyperscale data center build. This is a hands-on installer role for candidates with a full lead-installer skill set — capable of executing every phase of the install from cable reel setup through final dressing, with minimal supervision. You will work in 2-person crews on high-density fiber trunk pulls (MPO, LC), copper Ethernet runs, and rack & stack activities.\nEngagement Type\nThis is a contract-to-hire engagement. The role begins as a contract assignment on our current data center build project. Based on performance — quality of work, safety record, reliability, teamwork, and leadership — top performers will be offered full-time permanent positions with Startech Networks and rolled into our ongoing hyperscale project pipeline. Compensation, benefits, and direct-hire terms are discussed with candidates who advance through the initial contract phase.\nKey Responsibilities\nSet up cable jacks and reels for MPO, LC, and copper Ethernet cable pulls, including large-diameter reels for 144F and 288F trunks.\nExecute overhead cable pulls through ladder rack, cable tray, sleeves, and pass-throughs; manage bend radius, pulling tension, and slack loops per manufacturer spec.\nOperate scissor lifts and rolling scaffolds safely at 12–15 ft ceiling heights; complete overhead dressing and cable management with proper Velcro and hook-and-loop strapping.\nInstall and route cable through pass-through sleeves between rooms, verifying fire-stop and grommet integrity where applicable.\nPerform patch and label work on both cable ends — MPO and LC termination, connector cleaning (Sticklers, US Conec, Fluke Quick Clean), inspection, and full labeling to project spec.\nHandle Cat6 / Cat6A UTP Ethernet installations including cable pulls, jack termination, and Cat6/6A certification hand-off.\nAssist rack & stack activities — cabinet roll-in, leveling, PDU installation, ground bond, and initial cable management inside the rack.\nMaintain a clean, organized, and safe work zone; follow all daily JHAs and toolbox talks.\nInterface with test technicians to hand off cable segments for Tier 1 acceptance; support troubleshooting of failed connectors.\nMentor junior installers on proper technique, tool handling, and quality standards.\nMaintain assigned tools and consumables; escalate reorder needs to the foreman.\nRequired Qualifications\nMinimum 3 years of hands-on structured cabling experience with progressively increasing responsibility.\nDemonstrated lead-installer capability: able to execute a full install package (pull, route, terminate, label, dress) with minimal supervision.\nHands-on experience with cable reel handling and jack setup for medium and large fiber trunks.\nCertified for scissor lift and aerial lift operation (OSHA-compliant training documentation required).\nOSHA 10 certification (OSHA 30 preferred).\nExperience with pass-through installations, fire-stop coordination, and cable tray/ladder rack routing.\nWorking knowledge of MPO and LC connector types, cleaning tools, and inspection scopes.\nAbility to read cable schedules, elevation drawings, port maps, and BOM documentation.\nPhysical ability to lift 50 lbs repeatedly, climb ladders and lifts, and work overhead for extended periods.\nReliable transportation to site and consistent attendance record.\nValid driver's license.\nPreferred Qualifications\nBICSI Installer 1 (INST1) or Installer 2 – Copper (INST2-C) certification.\nPrior hyperscale data center project experience.\nFamiliarity with structured cabling standards (TIA-568, TIA-942).\nExperience with fiber cleaning and inspection tools (Sticklers CleanClicker, Fluke Fiber Inspection Scope, Viavi FBP).\nComfortable using test equipment for basic continuity checks (VFL, OLTS).\nBilingual (English/Spanish) a plus.\nPhysical Requirements\nAbility to lift up to 50 lbs repeatedly throughout the shift.\nExtended standing, walking, climbing ladders and scissor lifts, and working overhead at 12–15 ft heights.\nManual dexterity for connector work in tight spaces (behind racks, in overhead trays).\nAbility to work extended shifts (up to 10 hours) in a temperature-controlled but active data center environment.\nAbility to wear required PPE including hard hat, safety glasses, hi-vis vest, and fall protection harness.\nPosition Details\nReports To: Working Foreman\nWorks With: 1 partner in a 2-person crew (pull) or as part of larger patch/dressing team\nWork Environment: Active data center construction; overhead and floor-level structured cabling work\nSchedule: On-site during current project window; extended hours possible during critical phases\nHow to Apply\nProvide us with your resume and any relevant certifications here with the title \"Structured Cabling Technician\". Please include a brief note describing your most recent structured cabling projects, cable types you're most experienced with, and the largest fiber trunk you've pulled.","company":"Startech Networks","rawCompany":"startech networks","city":"Midland","state":"TX","isRemote":false,"isActive":false,"createdAt":"2026-08-06T15:43:15.760Z","occupations":[{"code":"49-2022.00","title":"Telecommunications Equipment Installers and Repairers, Except Line Installers","slug":"telecommunications-equipment-installers-and-repairers-except-line-installers"},{"code":"49-9052.00","title":"Telecommunications Line Installers and Repairers","slug":"telecommunications-line-installers-and-repairers"},{"code":"49-9099.00","title":"Installation, Maintenance, and Repair Workers, All Other","slug":"installation-maintenance-and-repair-workers-all-other"}],"industries":[{"code":"238210","title":"Electrical Contractors and Other Wiring Installation Contractors","slug":"electrical-contractors-and-other-wiring-installation-contractors"},{"code":"238290","title":"Other Building Equipment Contractors","slug":"other-building-equipment-contractors"},{"code":"238990","title":"All Other Specialty Trade Contractors","slug":"all-other-specialty-trade-contractors"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Data Center Structured Cabling","description":"Structured Cabling Technician – Lead Installer\nContract-to-Hire | On-Site | Hyperscale Data Center Build\nApproximate start date: 2nd week of September to 4th week of September\nAbout Startech Networks\nStartech Networks Inc. (STN) is a network infrastructure services provider specializing in hyperscale data center deployment. We deliver structured cabling, rack & stack, and complete network build-outs for major hyperscale operators and their prime contractors, and we operate large field crews across greenfield, colocation, and campus environments.\nRole Overview\nStartech is hiring approximately 40 experienced Structured Cabling Technicians to join our current hyperscale data center build. This is a hands-on installer role for candidates with a full lead-installer skill set — capable of executing every phase of the install from cable reel setup through final dressing, with minimal supervision. You will work in 2-person crews on high-density fiber trunk pulls (MPO, LC), copper Ethernet runs, and rack & stack activities.\nEngagement Type\nThis is a contract-to-hire engagement. The role begins as a contract assignment on our current data center build project. Based on performance — quality of work, safety record, reliability, teamwork, and leadership — top performers will be offered full-time permanent positions with Startech Networks and rolled into our ongoing hyperscale project pipeline. Compensation, benefits, and direct-hire terms are discussed with candidates who advance through the initial contract phase.\nKey Responsibilities\nSet up cable jacks and reels for MPO, LC, and copper Ethernet cable pulls, including large-diameter reels for 144F and 288F trunks.\nExecute overhead cable pulls through ladder rack, cable tray, sleeves, and pass-throughs; manage bend radius, pulling tension, and slack loops per manufacturer spec.\nOperate scissor lifts and rolling scaffolds safely at 12–15 ft ceiling heights; complete overhead dressing and cable management with proper Velcro and hook-and-loop strapping.\nInstall and route cable through pass-through sleeves between rooms, verifying fire-stop and grommet integrity where applicable.\nPerform patch and label work on both cable ends — MPO and LC termination, connector cleaning (Sticklers, US Conec, Fluke Quick Clean), inspection, and full labeling to project spec.\nHandle Cat6 / Cat6A UTP Ethernet installations including cable pulls, jack termination, and Cat6/6A certification hand-off.\nAssist rack & stack activities — cabinet roll-in, leveling, PDU installation, ground bond, and initial cable management inside the rack.\nMaintain a clean, organized, and safe work zone; follow all daily JHAs and toolbox talks.\nInterface with test technicians to hand off cable segments for Tier 1 acceptance; support troubleshooting of failed connectors.\nMentor junior installers on proper technique, tool handling, and quality standards.\nMaintain assigned tools and consumables; escalate reorder needs to the foreman.\nRequired Qualifications\nMinimum 3 years of hands-on structured cabling experience with progressively increasing responsibility.\nDemonstrated lead-installer capability: able to execute a full install package (pull, route, terminate, label, dress) with minimal supervision.\nHands-on experience with cable reel handling and jack setup for medium and large fiber trunks.\nCertified for scissor lift and aerial lift operation (OSHA-compliant training documentation required).\nOSHA 10 certification (OSHA 30 preferred).\nExperience with pass-through installations, fire-stop coordination, and cable tray/ladder rack routing.\nWorking knowledge of MPO and LC connector types, cleaning tools, and inspection scopes.\nAbility to read cable schedules, elevation drawings, port maps, and BOM documentation.\nPhysical ability to lift 50 lbs repeatedly, climb ladders and lifts, and work overhead for extended periods.\nReliable transportation to site and consistent attendance record.\nValid driver's license.\nPreferred Qualifications\nBICSI Installer 1 (INST1) or Installer 2 – Copper (INST2-C) certification.\nPrior hyperscale data center project experience.\nFamiliarity with structured cabling standards (TIA-568, TIA-942).\nExperience with fiber cleaning and inspection tools (Sticklers CleanClicker, Fluke Fiber Inspection Scope, Viavi FBP).\nComfortable using test equipment for basic continuity checks (VFL, OLTS).\nBilingual (English/Spanish) a plus.\nPhysical Requirements\nAbility to lift up to 50 lbs repeatedly throughout the shift.\nExtended standing, walking, climbing ladders and scissor lifts, and working overhead at 12–15 ft heights.\nManual dexterity for connector work in tight spaces (behind racks, in overhead trays).\nAbility to work extended shifts (up to 10 hours) in a temperature-controlled but active data center environment.\nAbility to wear required PPE including hard hat, safety glasses, hi-vis vest, and fall protection harness.\nPosition Details\nReports To: Working Foreman\nWorks With: 1 partner in a 2-person crew (pull) or as part of larger patch/dressing team\nWork Environment: Active data center construction; overhead and floor-level structured cabling work\nSchedule: On-site during current project window; extended hours possible during critical phases\nHow to Apply\nProvide us with your resume and any relevant certifications here with the title \"Structured Cabling Technician\". Please include a brief note describing your most recent structured cabling projects, cable types you're most experienced with, and the largest fiber trunk you've pulled.","datePosted":"2026-08-06T15:43:15.760Z","dateModified":"2026-08-06T15:43:15.760Z","hiringOrganization":{"@type":"Organization","name":"Startech Networks","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Midland","addressRegion":"TX","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"32d356496026e1f9dab07f9d"},"url":"https://jobsearcher.com/jobs/32d356496026e1f9dab07f9d"}}