{"schemaVersion":"jobsearcher.job.v1","id":"2bab21cb830a8e13ced78f7c","url":"https://jobsearcher.com/jobs/2bab21cb830a8e13ced78f7c","canonicalUrl":"https://jobsearcher.com/jobs/2bab21cb830a8e13ced78f7c","title":"Senior RF & Phased Array Engineer - Aerospace","description":"Senior RF & Phased Array Engineer - Aerospace\nSan Francisco Bay Area | On-site | $150,000-$185,000 + Up to $5m in Equity\nWe’re working with an early-stage aerospace company developing next-generation RF sensing technology for space-based applications.\n\nThey’re looking for a Senior RF & Phased Array Engineer to take significant technical ownership of RF systems and hardware, with particular interest in engineers with deep expertise in phased arrays, radar/passive sensing, RF systems or software-defined radio (SDR).\n\nSpace experience is not required. Relevant backgrounds could include aerospace, drones/UAVs, aircraft, radar, electronic warfare, SIGINT, terrestrial sensing, wireless systems or advanced RF research.\n\nThe Role\nThis is a highly hands-on position within a small engineering team. You’ll work on complex RF problems from early architecture and trade studies through design, prototyping, integration, bring-up and test.\n\nThe team is particularly interested in engineers who can operate independently: taking an ambiguous technical problem, defining an approach and getting hardware working without needing a large support structure around them.\n\nDepending on your background, your work could include:\n\nDesign and development of phased-array and electronically steered antenna systems\n\nBeamforming, beam steering, calibration and phase/amplitude control\n\nRF system architecture, analysis and trade studies\n\nDevelopment of high-sensitivity RF receiver and sensing systems\n\nRadar, passive RF sensing, direction finding and signal detection\n\nRF front-end design including LNAs, PAs, mixers, filters, switches and synthesizers/PLLs\n\nFrequency planning, gain/noise/linearity analysis and link budgets\n\nRF and microwave PCB design, component selection and schematic development\n\nIntegration of antennas, RF electronics, ADC/DACs, FPGAs and RFSoCs\n\nSDR and digital RF systems\n\nPrototype bring-up, troubleshooting and characterization\n\nHands-on testing using VNAs, spectrum analyzers, signal generators and oscilloscopes\n\nWorking closely with electrical, digital, mechanical, software and systems engineers to take hardware toward flight\n\nWhat We’re Looking For\nYou do not need to be an expert in every area above.\n\nWe’re particularly interested in engineers who bring significant depth in at least one of the following:\n\nPhased arrays / electronically steered antennas\n\nRF hardware and receiver design\n\nYou’ll ideally have strong fundamentals in RF, microwave or antenna engineering, alongside experience developing and testing real RF hardware rather than solely simulation or analysis.\n\nWe’re looking for someone who has taken technical work from an early concept through prototype and laboratory validation, has strong RF test and troubleshooting capability, and can independently own technically challenging problems.\n\nExperience with AESA/phased arrays, radar, EW/SIGINT, passive sensing, satellite communications, RFSoCs or advanced antenna systems would be particularly valuable.\n\nAerospace or spaceflight hardware experience is beneficial, but not essential.\n\nWho Could Be a Good Fit?\nWe’re deliberately looking beyond traditional satellite RF engineers.\n\nYou could currently be developing phased arrays for radar, RF systems for a UAV, passive sensing hardware for an aircraft, an SDR-based receiver, EW/SIGINT equipment or advanced antenna systems.\n\nYou could also come from a strong research background. Engineers with an advanced Master’s or PhD in RF, electromagnetics, antennas or radar and substantial hands‑on hardware and laboratory experience are encouraged to apply.\n\nWhat matters most is genuine technical depth, strong hands‑on capability and the ability to turn difficult RF problems into working hardware.\n\nWhy Join?\nThis is an opportunity to join a well-funded aerospace startup at an early stage and have a direct influence on the architecture and hardware that ultimately flies.\n\nRather than owning one narrow component within an established engineering organization, you’ll have the opportunity to solve difficult RF problems, build new capability from the ground up and help shape the RF function as the company grows.\n\nBase salary: $150,000-$185,000 + Up to $5m in Equity\nIf you’ve built sophisticated phased-array, radar, sensing, SDR or RF hardware and want significantly more technical ownership over what gets built next, we’d be keen to hear from you.\n\n#J-18808-Ljbffr","company":"Evona","rawCompany":"evona","city":"Millbrae","state":"CA","isRemote":false,"isActive":false,"createdAt":"2026-10-29T03:57:33.400Z","occupations":[{"code":"17-2011.00","title":"Aerospace Engineers","slug":"aerospace-engineers"},{"code":"17-2072.00","title":"Electronics Engineers, Except Computer","slug":"electronics-engineers-except-computer"},{"code":"17-2199.00","title":"Engineers, All Other","slug":"engineers-all-other"}],"industries":[{"code":"334511","title":"Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing","slug":"search-detection-navigation-guidance-aeronautical-and-nautical-system-and-instrument-manufacturing"},{"code":"334220","title":"Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing","slug":"radio-and-television-broadcasting-and-wireless-communications-equipment-manufacturing"},{"code":"927110","title":"Space Research and Technology","slug":"space-research-and-technology"}],"jobPosting":{"@context":"https://schema.org","@type":"JobPosting","title":"Senior RF & Phased Array Engineer - Aerospace","description":"Senior RF & Phased Array Engineer - Aerospace\nSan Francisco Bay Area | On-site | $150,000-$185,000 + Up to $5m in Equity\nWe’re working with an early-stage aerospace company developing next-generation RF sensing technology for space-based applications.\n\nThey’re looking for a Senior RF & Phased Array Engineer to take significant technical ownership of RF systems and hardware, with particular interest in engineers with deep expertise in phased arrays, radar/passive sensing, RF systems or software-defined radio (SDR).\n\nSpace experience is not required. Relevant backgrounds could include aerospace, drones/UAVs, aircraft, radar, electronic warfare, SIGINT, terrestrial sensing, wireless systems or advanced RF research.\n\nThe Role\nThis is a highly hands-on position within a small engineering team. You’ll work on complex RF problems from early architecture and trade studies through design, prototyping, integration, bring-up and test.\n\nThe team is particularly interested in engineers who can operate independently: taking an ambiguous technical problem, defining an approach and getting hardware working without needing a large support structure around them.\n\nDepending on your background, your work could include:\n\nDesign and development of phased-array and electronically steered antenna systems\n\nBeamforming, beam steering, calibration and phase/amplitude control\n\nRF system architecture, analysis and trade studies\n\nDevelopment of high-sensitivity RF receiver and sensing systems\n\nRadar, passive RF sensing, direction finding and signal detection\n\nRF front-end design including LNAs, PAs, mixers, filters, switches and synthesizers/PLLs\n\nFrequency planning, gain/noise/linearity analysis and link budgets\n\nRF and microwave PCB design, component selection and schematic development\n\nIntegration of antennas, RF electronics, ADC/DACs, FPGAs and RFSoCs\n\nSDR and digital RF systems\n\nPrototype bring-up, troubleshooting and characterization\n\nHands-on testing using VNAs, spectrum analyzers, signal generators and oscilloscopes\n\nWorking closely with electrical, digital, mechanical, software and systems engineers to take hardware toward flight\n\nWhat We’re Looking For\nYou do not need to be an expert in every area above.\n\nWe’re particularly interested in engineers who bring significant depth in at least one of the following:\n\nPhased arrays / electronically steered antennas\n\nRF hardware and receiver design\n\nYou’ll ideally have strong fundamentals in RF, microwave or antenna engineering, alongside experience developing and testing real RF hardware rather than solely simulation or analysis.\n\nWe’re looking for someone who has taken technical work from an early concept through prototype and laboratory validation, has strong RF test and troubleshooting capability, and can independently own technically challenging problems.\n\nExperience with AESA/phased arrays, radar, EW/SIGINT, passive sensing, satellite communications, RFSoCs or advanced antenna systems would be particularly valuable.\n\nAerospace or spaceflight hardware experience is beneficial, but not essential.\n\nWho Could Be a Good Fit?\nWe’re deliberately looking beyond traditional satellite RF engineers.\n\nYou could currently be developing phased arrays for radar, RF systems for a UAV, passive sensing hardware for an aircraft, an SDR-based receiver, EW/SIGINT equipment or advanced antenna systems.\n\nYou could also come from a strong research background. Engineers with an advanced Master’s or PhD in RF, electromagnetics, antennas or radar and substantial hands‑on hardware and laboratory experience are encouraged to apply.\n\nWhat matters most is genuine technical depth, strong hands‑on capability and the ability to turn difficult RF problems into working hardware.\n\nWhy Join?\nThis is an opportunity to join a well-funded aerospace startup at an early stage and have a direct influence on the architecture and hardware that ultimately flies.\n\nRather than owning one narrow component within an established engineering organization, you’ll have the opportunity to solve difficult RF problems, build new capability from the ground up and help shape the RF function as the company grows.\n\nBase salary: $150,000-$185,000 + Up to $5m in Equity\nIf you’ve built sophisticated phased-array, radar, sensing, SDR or RF hardware and want significantly more technical ownership over what gets built next, we’d be keen to hear from you.\n\n#J-18808-Ljbffr","datePosted":"2026-10-29T03:57:33.400Z","dateModified":"2026-10-29T03:57:33.400Z","hiringOrganization":{"@type":"Organization","name":"Evona","sameAs":"https://jobsearcher.com"},"jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Millbrae","addressRegion":"CA","addressCountry":"US"}},"identifier":{"@type":"PropertyValue","name":"JobSearcher","value":"2bab21cb830a8e13ced78f7c"},"url":"https://jobsearcher.com/jobs/2bab21cb830a8e13ced78f7c"}}