- UpvoteDownvoteShare Job
- Suggest Revision
The Merchant /Buyer III - Power Tools role is responsible for all aspects of Ace and Emery Jensen Distribution assortment strategy, operations development and execution through to retail for the Power Tools category.
$131,000 - $168,000 a yearFull-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
CAD tools for schematic capture such as Orcad or Mentor Graphics and mechanical design such as AutoCad or other 2D and solid modeling tools. Characteristics of and circuit design using power electronics devices including BJTs, MOSFETS and IGBTs.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Job DescriptionOperates and maintains power equipment such as, clamp, slip-sheet, or fork sit-down lift truck, manual and electric pallet jacks, cigarette stamping machine, floor scrubber, battery exchanger, and power tools to move and prepare goods in/out of depot.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
This position is responsible for overseeing the full system lifecycle of the Power Conversion systems for electro-magnets, whether pulsed or continuous duty and range from tens of Watts to roughly 0.5 MW average.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Name Senior Staff Power Electronics Engineer. Generac is seeking an industry leading power electronics system engineer to contribute to Generac’s home standby battery systems. Expert in Altium 365 schematic and layout design tools and processes including revision control, PLM management, and part library development.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Costco Wholesale Corp. - 3800 N DIVISION [Forklift / Warehouse Associate / Material Handler] As an Equipment Operator with Costco, you will: Operate and maintain power equipment such as, clamp, slip-sheet, or fork sit-down lift truck, manual and electric pallet jacks, stamping machine, floor scrubber, battery exchanger, and power tools to move and prepare goods in/out of depot.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Costco Wholesale Corp. - 8400 WEST SHERMAN ST [Forklift / Warehouse Associate / Material Handler] As an Equipment Operator with Costco, you will: Operate and maintain power equipment such as, clamp, s.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Costco Wholesale Corp. - 5236 INTERCOASTAL DRIVE [Forklift / Warehouse Associate / Material Handler] As an Equipment Operator with Costco, you will: Operate and maintain power equipment such as, clamp, slip-sheet, or fork sit-down lift truck, manual and electric pallet jacks, stamping machine, floor scrubber, battery exchanger, and power tools to move and prepare goods in/out of depot.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Costco Wholesale Corp. - 11600 RIVERSIDE DRIVE, BLDG A [Forklift / Warehouse Associate / Material Handler] As an Equipment Operator with Costco, you will: Operate and maintain power equipment such as, clamp, slip-sheet, or fork sit-down lift truck, manual and electric pallet jacks, stamping machine, floor scrubber, battery exchanger, and power tools to move and prepare goods in/out of depot.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Job Description Operates and maintains power equipment such as, clamp, slip-sheet, or fork sit-down lift truck, manual and electric pallet jacks, cigarette stamping machine, floor scrubber, battery exchanger, and power tools to move and prepare goods in/out of depot.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Position Requirements 10+ years Hands-on Administration experience with Tools like Power BI or Tableau, Qlikview, Cognos, MicroStrategy. Primary Technical Skills Reporting Tools: Power BI or Tableau, Qlikview, Cognos, MicroStrategy.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Familiarity with analog design, including PCB power architecture, signal processing, a/d, d/a. Familiarity with analog design, including PCB power architecture, signal processing, a/d, d/a. Experience in digital circuit design, including FPGA and microcontroller programming.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Advanced Knowledge: Low voltage DC power systems Low voltage, medium voltage, and high voltage AC power systems Drawings Theory OSHA regulations Hand tools Equipment operation (skid-steer, forklift, etc) Job hazard analysis (JHA) creation Electrical tools (multimeter, IR camera) IV curve tracing ANSI/NETA MTS SCADA systems.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Troubleshoots low voltage DC power systems. Conducts preventive maintenance on AC and DC power systems. This work includes preventive and corrective maintenance of on-site assets such as solar panels, trackers, power inverters, and substation components.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Strong proficiency in power electronic circuit design, analysis, and simulation tools such as Ansys Q3D, SIwave, MATLAB/Simulink, or similar. Develop, validate, and release power electronics models using tools like Saber, Simplorer, MATLAB, Simulink and Simscape.
ExpandApply NowActive JobUpdated Yesterday
power tools jobs Title: service tech Company: Feed 8
FEATURED BLOG POSTS
Email Etiquette Principles - Why is it Important
Why is email etiquette important? Let's imagine you're hiring for a new role, and you’ve just received the email below.
10 Reasons HR is Important to an Organization
"Nothing we do is more important than hiring and developing people."
7 Importances of Organizational Culture and How to Build It
The world of work has drastically changed in the past few years. Where a good salary and a nice office might have been enough to attract talent in the past, employees today expect flexibility, growth opportunities, and a healthy work environment. In fact, 77% of applicants say they’d consider a company’s culture before applying for a job.
Collaborative Recruiting: The Key to a Better Talent Acquisition Strategy
Talent acquisition is a multi-stage process where candidates undergo various application steps before getting hired. The unfortunate reality is that it is a labor-intense system, with the hiring manager and recruiter often handling all of the work on their own. Ask any one of them, and you will hear about the overabundance of applications and the demanding task of filtering through them to find the best candidates. The quality of talent suffers under the weight of all that work on one person's hands. It's not easy, but as many companies are starting to realize, there is a better way. The future of talent acquisition lies in collaborative recruiting!
4 Talent Acquisition Trends Going Into 2023
For better or worse, a side effect of the COVID-19 pandemic was a marked shift in talent acquisition practices worldwide. With the struggle to retain talent that began in 2020, companies have had to rethink recruitment strategies. The result has been new talent acquisition trends that are well on their way to becoming commonplace. These are the practices that are going to become even more widespread going into 2023.
Why is Professionalism Important & How to Be Professional
You might have heard the word professionalism thrown around in the workplace, but do you know what it means? And do you know how to maintain professionalism no matter the circumstances?
Hiring Again After Mass Layoffs
It's never an easy decision to let members of your staff go, but depending on the state of your business, mass layoffs may have been the only way to survive. Now that you're months into the future, you may find yourself itching to start hiring again after previous layoffs.