- UpvoteDownvoteShare Job
- Suggest Revision
Experience must include ISO/TS, APQP, PPAP, SPC, IATF, FEMA, Gage R&R, CMM. Joining forces, QMC-EMI makes the production and prototype parts that could be used in the next airplane you take or the next car you buy.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
The Silicon Photonics TD Process Integration Engineer will be responsible for but not limited to: Collaborates with Yield Analysis, Device and Defect Engineers, SPPD (Si P Product Division) designers, and Process Engineers to ensure new processes and products are capable of meeting yield and reliability requirements at the time of PRQ, and setup systems that enable best balance of manufacturability and quality for Production Ramp.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
As a member of the epitaxial and optical thin film manufacturing group you’ll be immersed in multi-modal thin film growth and deposition techniques while developing your metrology and characterization skills to enable best-in-class device production.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Understanding of basic quality core tools such as Control Plans, APQP (Advanced Product Quality Planning), SPC (Statistical Process Control), PPAP (Production Part Approval Process), FMEA (Failure Mode Effects Analysis) and MSA (Measurement Systems Analysis.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
This position would require a broad skill set across test development, characterization, manufacturing, failure analysis, qualification, SPC, yield improvement and process control. 8+ years of experience in the domain: SOC/VLSI/Mixed Signal IC bring-up, production and characterization test and product engineering.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Direct knowledge of design and resolving issues with GMP Biopharmaceutical Production facility equipment/systems such as cell culture reactors, centrifugation, chromatography, tangential flow filtration as well as other equipment needed to support these processes such as autoclaves, clean in place (CIP) systems, washers, clean steam, water for injection, etc.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
The Manufacturing Supervisor works closely with the Plant Manager and Plant Superintendent to ensure the production of a quality product that meets or exceeds customer expectations. Knowledge of Six Sigma, SPC, and Lean Manufacturing.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Strong knowledge of manufacturing procedures, production methods (including machining and welding, kitting), shop standards, team building, SPC and modern quality assurance applications.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Operate and maintain injection molding/automation equipment to achieve production goals. Maintain controlled areas and environmental monitoring in injection molding production. Ability and experience with automated records systems such as SPC, MES, EWM, SAP.
ExpandApply NowActive JobUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
Strong working knowledge of Lean Manufacturing, Six Sigma, SPC, 5-S, DOE, Kaizen, VSM, Gage R&R, Poka-Yoke. Process Development Engineer reports directly to the Director of Operations or Engineering or equivalent, focusing on development and process improvements to support new designs in development as well as production and engineering activities.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Maintain required records and documentation, as related to materials and supplies, for internal/external audit requirements including SPC, GMP, SQF and customer specific (Panda Express, Yum). Exemplify and ensure compliance with the requirement of GMP, SPC, SQF, Safety and Standards of Conduct policies and procedures.
ExpandUpdated Yesterday - UpvoteDownvoteShare Job
- Suggest Revision
DIRECT REPORTS: Material Scheduling Manager, Production Manager, Safety Coordinator, Quality Supervisor, Process Engineer, Maintenance Manager. Oversee, plan and coordinate manufacturing teams including Production, Quality, Material Scheduling, Environmental Health Safety, Maintenance and Process/Engineering.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
The Production Superintendent - 1st Shift is responsible for plant effectiveness and efficiency for a section of a processing and/or cook plant; providing direction, training, coaching, directing to Team Leaders and indirectly to hourly production associates.
ExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
We are searching for a Surface Mount Process Engineer to join our production team and take pride in delivering fast to market products. Demonstrated ability in applying SPC, Six Sigma and Lean Manufacturing.
Full-timeExpandApply NowActive JobUpdated Today - UpvoteDownvoteShare Job
- Suggest Revision
Ensures receiving, storage and usage procedures of production materials or supplies are completed in compliance with Good Manufacturing Practices (GMP) and Safe Quality Food (SQF). Ensure compliance and train employees on standard operational procedures in relation to SPC program, polices, procedures and third party GMP audits.
Full-timeExpandApply NowActive JobUpdated Today
spc production jobs
FEATURED BLOG POSTS
How to Write a Statement of Interest the Best Way
Your life's goal is to work for Company A. Their brand, their product, their reputation—it's safe to say you're a fan. The only problem is that their careers page never highlights the role that matches your skills and experience. It's a bummer for sure, but don't fret.
Should I Hire for Potential Over Experience?
The workforce is shifting every day. In fact, research from the World Economic Forum (WEF) shows over half of employees around the world will need to upskill or reskill by 2025. The rapid rise of digital literacy, automation, and new technologies will quickly supersede businesses that don't train ahead of the curve. With the dire need to invest in training, it's evident that hiring someone with experience isn't that much different than hiring someone without it.
How to Decide Between Two Job Offers: 10 Practical Tips
It’s arguably a good predicament to have. You’ve applied to many jobs, interviewed multiple times, and now find yourself with two legit job offers. Nice! But although this is a feel-good validation of everything you have to offer, a daunting choice lies ahead. How do you decide which job will be the best fit for you?
Why Work in Sales? 9 Reasons & Tips on Answering as an Interview Question!
Working in sales can be demanding and challenging, but it can also be gratifying. Sales is an excellent career with a clear path full of excitement and potential for growth. So, if you're contemplating careers and have wondered "why work in sales?", keep reading to determine if sales is a suitable role for you.
How to Fire an Employee
So… you've finally decided to let one of your employees go. Drafting the paperwork and corresponding with HR is the easy part, but knowing how to fire an employee is where things get complicated. In fact, it is one of the most challenging conversations to have in the workplace. However, it must be done, and it must be done with poise and tact. Not only should you keep your state law in mind, but you should also consider your former employee's wellbeing.
How Long Does it Take to Hear Back from a Job?
Are you applying for your very first job? Maybe you’re anticipating your termination from your current role and want to be proactive. Either way, waiting to hear back on your job application can be stressful. If time has passed since you applied, you may wonder how long does it take to hear back from a job. Well, the answer is... it depends.
How to Respond to a Recruiter Through Email? (Tips & Examples)
Rather than wading through an endless list of open roles, wouldn’t it be nice if relevant job opportunities come to you?